- 05 6月, 2012 2 次提交
-
-
由 Luiz Capitulino 提交于
Callers are changed to use qerror_report_err() to keep their QError semantics. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-By: NLaszlo Ersek <lersek@redhat.com>
-
由 Luiz Capitulino 提交于
The only backend that really uses it is the socket one, which calls monitor_get_fd(). But it can use 'cur_mon' instead. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-By: NLaszlo Ersek <lersek@redhat.com>
-
- 26 4月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch adds a function which creates unique serial numbers for usb devices and puts it into use. Windows guests tend to become unhappy if they find two identical usb devices in the system. Effects range from non-functional devices (with yellow exclamation mark in device manager) to BSODs. Handing out unique serial numbers to devices fixes this. With this patch applied almost all emulated devices get a generated, unique serial number. There are two exceptions: * usb-storage devices will prefer a user-specified serial number and will only get a generated number in case the serial property is unset. * usb-hid devices keep the fixed serial number "42" as it is used to signal "remote wakeup actually works". See commit 7b074a22Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 13 3月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
Reorganize usb source files. Create a new hw/usb/ directory and move all usb source code to that place. Also make filenames a bit more descriptive. Host adapters are prefixed with "hch-" now, usb device emulations are prefixed with "dev-". Fixup paths Makefile and include paths to make it compile. No code changes. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 27 2月, 2012 1 次提交
-
-
由 Jan Kiszka 提交于
When creating an USB device the old way, there is no way to specify the target bus. Thus the warning issued by usb_create makes no sense and rather confuses our users. Resolve this by passing a bus reference to the usbdevice_init handler and letting those handlers forward it to usb_create. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 2月, 2012 2 次提交
-
-
由 Gerd Hoffmann 提交于
With the separation of the device lookup (via usb_find_device) and packet processing we can lookup device and endpoint before setting up the usb packet. So we can initialize USBPacket->ep early and keep it valid for the whole lifecycle of the USBPacket. Also the devaddr and devep fields are not needed any more. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
All drivers except usb-hub use usb_generic_handle_packet. The only reason the usb hub has its own function is that it used to be called with packets which are intended for downstream devices. With the new, separate device lookup step this doesn't happen any more, so the need for a different handle_packet callback is gone. So we can kill the handle_packet callback and just call usb_generic_handle_packet directly. The special hub handling in usb_handle_packet() can go away for the same reason. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 04 2月, 2012 2 次提交
-
-
由 Anthony Liguori 提交于
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Type registeration is going to get turned into a QOM call so decouple the legacy support. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 1月, 2012 3 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
We already have a QOM interface for this so let's use it. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Right now, DeviceInfo acts as the class for qdev. In order to switch to a proper ObjectClass derivative, we need to ween all of the callers off of interacting directly with the info pointer. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 13 1月, 2012 2 次提交
-
-
由 H. Peter Anvin 提交于
This brings a usb audio device to qemu. Output only, fixed at 16bit stereo @ 480000 Hz. Based on a patch from H. Peter Anvin <hpa@linux.intel.com> Usage: add '-device usb-audio' to your qemu command line. Works sorta ok on a idle machine. Known issues: * Is *very* sensitive to latencies. * Burns quite some CPU due to usb polling. In short: It brings the qemu usb emulation to its limits. Enjoy! Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 13 12月, 2011 1 次提交
-
-
由 Peter Maydell 提交于
"!X == 2" is always false (spotted by Coverity), so the checks for whether rndis is in the correct state would never fire. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 15 11月, 2011 1 次提交
-
-
由 Andrzej Zaborowski 提交于
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 14 11月, 2011 1 次提交
-
-
由 Peter Maydell 提交于
"!X == 2" is always false (spotted by Coverity), so the checks for whether rndis is in the correct state would never fire. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 8月, 2011 1 次提交
-
-
由 Gerd Hoffmann 提交于
Zap data pointer from USBPacket, add a QEMUIOVector instead. Add a bunch of helper functions to manage USBPacket data. Switch over users to the new interface. Note that USBPacket->len was used for two purposes: First to pass in the buffer size and second to return the number of transfered bytes or the status code on async transfers. There is a new result variable for the latter. A new status code was added to catch uninitialized result. Nobody creates iovecs with more than one element (yet). Some users are (temporarely) limited to iovecs with a single element to keep the patch size as small as possible. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 26 5月, 2011 1 次提交
-
-
由 Hans de Goede 提交于
This allows using the generic usb_generic_handle_packet function from device code which does ASYNC control requests (such as the linux host pass through code). Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
- 11 1月, 2011 4 次提交
-
-
由 Gerd Hoffmann 提交于
This patch moves setting and clearing the remote_wakeup feature bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also USB_REQ_GET_STATUS handling is moved to common code. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch adds fields to the USBDevice struct for the current speed (hard-wired to full speed for now) and current device configuration. Also a init function is added which inializes these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION handling to be moved to common code. For most drivers the conversion is trivial ad they support a single configuration only anyway. One exception is bluetooth where some device-specific setup code runs after get/set configuration. The other is usb-net which actually has two configurations so the the code to check for the active configuration has been adapted. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices. Move it to common code. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Switch the usb network driver over to the new descriptor infrastructure. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 12 12月, 2010 2 次提交
-
-
由 Gleb Natapov 提交于
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Gleb Natapov 提交于
Add "fw_name" to DeviceInfo to use in device path building. In contrast to "name" "fw_name" should refer to functionality device provides instead of particular device model like "name" does. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 17 11月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Properly check array bounds before accessing array element. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 8月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 26 4月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Value stored is never read. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 01 4月, 2010 1 次提交
-
-
由 Max Reitz 提交于
Mass Storage Reset and Get Max LUN are class specific requests, but they were not marked as such in hw/usb-msd.c, moved therefore ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c to hw/usb.h. Furthermore there was a problem in hw/usb-ohci.c when using DEBUG concerning systems where size_t is a 32 bit integer (printf resulted in a segmentation fault). Signed-off-by: NMax Reitz <max@tyndur.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
-
- 25 2月, 2010 1 次提交
-
-
由 Paul Brook 提交于
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 20 1月, 2010 1 次提交
-
-
由 Kevin Wolf 提交于
Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is conditional on a define from config-host.h which is included only later. Include that file earlier to get the warnings back. Reactivating it unfortunately leads to some warnings about unused qdev_init results. These calls are changed to qdev_init_nofail to avoid build failures. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Rebased to master, adapted to device renaming by armbru, no other changes. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Markus Armbruster 提交于
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 03 12月, 2009 2 次提交
-
-
由 Mark McLoughlin 提交于
Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Since 1cc33683, this field is not set for most devices, so just remove it and its remaining few uses. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-