Wire up the virtio-input HID devices (keyboard, mouse, tablet)
for the CCW bus. The virtio-input is a virtio-1 device,
so disable legacy revision 0.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <6a8ea4c503ee32c2ca7fa608b5f2f547009be8ee.1507557166.git.alifm@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Nothing hindering us anymore from unlocking the restart code (used for
NMI).
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-29-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard]
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We want to use the same code base for TCG, so let's cleanly factor it
out.

The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Calling do_subchannel_work with no function control flags set in SCSW is
a programming error. Currently we handle this differently in
do_subchannel_work_virtual and do_subchannel_work_passthrough. Let's be
consistent and guard with a common assert against this programming error.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171004154144.88995-2-pasic@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: more changes in hw/s390x/css.c, added target/s390x/cpu_models.c]
Message-Id: <20171006235023.11952-27-f4bug@amsat.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The "sclpquiesce" device is just an internal device that should not be
created by the user directly. Though it currently does not seem to cause
any obvious trouble when the user instantiates an additional device, let's
better mark it with user_creatable = false to avoid unexpected behavior,
e.g. because the quiesce notifier gets registered multiple times.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1507193105-15627-1-git-send-email-thuth@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

A TYPE_SCLP_CPU_HOTPLUG device for handling cpu hotplug events
is already created by the sclp event facility. Adding a second
TYPE_SCLP_CPU_HOTPLUG device via -device sclp-cpu-hotplug creates
an ambiguity in raise_irq_cpu_hotplug(), leading to a crash once
a cpu is hotplugged.

To fix this, disallow creating a sclp-cpu-hotplug device manually.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The "sclp" device is just an internal device that can not be instantiated
by the users. If they try to use it, they only get a simple error message:

$ qemu-system-s390x -nographic -device sclp
qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be
handled by this machine

Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is
a non-pluggable sysbus device, there is really no way that the "sclp"
device can be used by the user, so let's set the user_creatable = false
accordingly.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

If we fail to set a proper TOD clock on the target system,  this can
already result in some problematic cases. We print several warn messages
on source and target in that case.

If kvm fails to set a nonzero epoch index, then we must ultimately fail
the migration as this will result in a giant time leap backwards. This
patch lets the migration fail if we can not set the guest time on the
target.

On failure the guest will resume normally on the original host machine.
Signed-off-by: NCollin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change, minor fixups]
Message-Id: <20171004105751.24655-3-borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Commit e996583e ("s390x/css: activate ChannelSubSys migration",
2017-07-11) was supposed to enable css migration for virtio-ccw
machines starting 2.10, but it ended up effectively enabling it
only for 2.10 as the registration of the appropriate VMStateDescription
happens in ccw_machine_2_10_instance_options which does not get
called for machines more recent than 2_10.

Let us move the corresponding chunk of code (which conditionally enables
the migration based on the value of the corresponding class property) to
ccw_init, which is called for each virtio-ccw machine instance.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20171004110109.16525-1-pasic@linux.vnet.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Add missing categorizations for some s390x devices:
- zpci device -> misc
- 3270 -> display
- vfio-ccw -> misc
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Will be handy in the future.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).

This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine

qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.

This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

This reverts commit d32bd032.

Turns out that old QEMUs always created a pci host bridge
and for many CPU models the migration from old QEMUs to new
QEMUs will fail with
qemu-system-s390x: Unknown savevm section or instance 'PCIBUS' 0
qemu-system-s390x: load of migration failed: Invalid argument

As a quick fix we will revert the commit and always create the
pci host bridge.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[fixed revert to keep the comment fixup, added a comment in the code]
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20170928131831.81393-1-borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Let's add indirect data addressing support for our virtual channel
subsystem. This implementation does not bother with any kind of
prefetching. We simply step through the IDAL on demand.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-6-pasic@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address.  If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.

Let us stick even closer to the architecture specification.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.

Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-4-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.

Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Wire up the virtio-gpu device for the CCW bus. The virtio-gpu
is a virtio-1 device, so disable revision 0.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-Id: <6c53f939cf2d64b66d2a6878b29c9bf3820f3d5b.1505485574.git.alifm@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We have two stale comments suggesting one should think about virtio
config space endianness a bit longer. We have just done that, and came to
the conclusion we are fine as is: it's the responsibility of the virtio
device and not of the transport (and that is how it works now). Putting
the responsibility into the transport isn't even possible, because the
transport would have to know about the config space layout of each
device.

Let us remove the stale comments.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Message-Id: <20170914105535.47941-1-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

This is the first step to allow hot plugging of CPUs in a non-sequential
order. If a cpu is available ("plugged") can directly be decided by
looking at the cpu state pointer.

This makes sure, that really only cpus attached to the machine are
reported.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-22-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Now that there is only one user of cpu_s390x_create() left, make cpu
creation look like on x86.
- Perform the model/properties split and checks in s390_init_cpus()
- Parse features only once without having to remember if already parsed
- Pass only the typename to s390x_new_cpu()
- Use the typename of an existing CPU for hotplug via cpu-add
Acked-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-21-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Now that we have possible_cpus, we can get rid of the global variable
and rewrite s390_cpu_addr2state() to use it.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-20-david@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

CPU hotplug is only possible on a per core basis on s390x. So let's
add possible_cpus and wire everything up properly.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-19-david@redhat.com>
Acked-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

device_del on a CPU will currently do nothing. Let's emit an error
telling that this is will currently not work (there is no architecture
support on s390x). Error message copied from ppc.

(qemu) device_del cpu1
device_del cpu1
CPU hot unplug not supported on this machine
Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-18-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Some time ago we discussed that using "id" as property name is not the
right thing to do, as it is a reserved property for other devices and
will not work with device_add.

Switch to the term "core-id" instead, and use it as an equivalent to
"CPU address" mentioned in the PoP. There is no such thing as cpu number,
so rename env.cpu_num to env.core_id. We use "core-id" as this is the
common term to use for device_add later on (x86 and ppc).

We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync.
cpu_index was already implicitly used by e.g. cpu_exists(), so keeping
both in sync seems to be the right thing to do.

cpu_index will now no longer automatically get set via
cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed
in sync.

Our new cpu property "core-id" can be a static property. Range checks can
be avoided by using the correct type and the "setting after realized"
check is done implicitly.

device_add will later need the reserved "id" property. Hotplugging a CPU
on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2".
Reviewed-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-14-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Specifying more than 1 CPU (e.g. -smp 5) leads to SIGP errors (the
guest tries to bring these CPUs up but fails), because we don't support
multiple CPUs on s390x under TCG.

Let's bail out if more than 1 is specified, so we don't raise people's
hope.
Tested-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-12-david@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Implemented in hw/s390x/s390-virtio-hcall.c, so let's move it to the
right header file.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-6-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The only interface left, so let's properly rename it.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-5-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

It is a leftover from the days where we had still the !ccw virtio
machine. As this one is long gone, let's move everything to
s390-virtio-ccw.c.
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-4-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The case in question actually never happens. Let us get rid of the dead
code.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170908152446.14606-4-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Back then in the time of df1fe5bb ("s390: Virtual channel subsystem
support.", 2013-01-24) -EIO used to map to a channel-program check (via
the default label of the switch statement).  Then 2dc95b4c
("s390x/3270: 3270 data stream handling", 2016-04-01) came along
and that changed dramatically.

Let us roll back this undesired side effect, and go back to
channel-program check.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Fixes: 2dc95b4c "s390x/3270: 3270 data stream handling"
Message-Id: <20170908152446.14606-3-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The architecture says that channel-data check is indicating that
an uncorrected storage (memory) error has been detected in regard
to the data residing in main storage (memory) that is currently
used for an I/O operation. The described detection is done using
the CBC technology.

The ccw interpretation code is however generating a channel-data check
effectively when the (device specific) ccw_cb returns -EFAULT.  In case
of virtio-ccw devices this happens when mapping memory fails, or when a
NULL pointer is encountered. So this behavior is not architecture
conform.

Furthermore the best fit for these situations (null pointer, mapping a
piece of guest memory fails) from architectural perspective the condition
described as the channel subsystem refers to a location that is not
available, which when encountered shall result in a channel-program
check.

To fix this, all we have to do is to get rid of the switch case matching
-EFAULT: the default is generating a channel-program check.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170908152446.14606-2-pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Let's introduce iommu replay callback for s390 pci iommu memory region.
Currently we don't need any dma mapping replay. So let it return
directly. This implementation will avoid meaningless loops calling
translation callback.
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-4-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

PCIDevice pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Message-Id: <1504606380-49341-2-git-send-email-zyimin@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>