Signed-off-by: Nmalc <av1474@comtv.ru>

Fix forcing multicast msgs to loopback on OpenBSD.
e.g.
$ sudo qemu -m 128 -no-fd-bootchk \
        -hda virtual.img -boot n -nographic \
        -net nic,vlan=0,model=rtl8139,macaddr=52:54:00:12:34:03 \
        -net user -tftp /usr/src/sys/arch/i386/compile/TEST -bootp pxeboot \
        -net nic,vlan=1,model=rtl8139,macaddr=52:54:00:23:03:01 \
        -net tap,vlan=1,script=no \
        -net nic,vlan=3,model=rtl8139,macaddr=52:54:00:23:03:03 \
        -net socket,vlan=3,mcast=230.0.0.1:10003
setsockopt(SOL_IP, IP_MULTICAST_LOOP): Invalid argument
qemu: -net socket,vlan=3,mcast=230.0.0.1:10003: Device 'socket' could not be initialized
Signed-off-by: NBrad Smith <brad@comstyle.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use mmap to allocate executable memory on NetBSD as well.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix network interface tap backend work on NetBSD.
It uses an ioctl to get the tap name.

Signed-off-by: Christoph Egger<Christoph.Egger@amd.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cppcheck report:

darwin-user/signal.c:322: style: Unused variable: i
darwin-user/signal.c:322: style:
Variable 'err' is assigned a value that is never used
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Copy propagation introduced in 22613af4
considered only global registers. However, register temps and stack
allocated locals must be handled differently because register temps
don't survive across brcond.

Fix by propagating only within same class of temps.
Tested-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Check whether dc->npc is dynamic before using its value for branch.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When overriding a tool name via a shell variable, don't
tack on the cross-prefix.  This specifically allows the
pkg-config command to be overridden and work where it
does not exist in some cross build environments.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If migration failed in migrate_fd_put_buffer, the monitor may have been
resumed not only in the error path of that function but also once again
in migrate_fd_put_ready which is called unconditionally by
migrate_fd_connect.

Fix this by establishing a cleaner policy: the monitor shall be resumed
when the migration file is closed, either via callback
(migrate_fd_close) or in migrate_fd_cleanup if no file is open (i.e. no
callback invoked).
Reported-By: NMichael Tokarev <mjt@tls.msk.ru>
Tested-By: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qbus_reset_all_fn was registered twice, so a lot of device reset
functions were also called twice when QEMU started.
Which was introduced by 80376c3f
This patch fixes it by making the main_system_bus creation not register
reset handler.

Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Tested-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When trying to map an alias of a ram region, where the alias starts at
address A and we map it into address B, and A > B, we had an arithmetic
underflow.  Because we use unsigned arithmetic, the underflow converted
into a large number which failed addrrange_intersects() tests.

The concrete example which triggered this was cirrus vga mapping
the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of
the framebuffer) into offsets 0xa0000 (relative to system addres space
start).

With our favorite analogy of a windowing system, this is equivalent to
dragging a subwindow off the left edge of the screen, and failing to clip
it into its parent window which is on screen.

Fix by switching to signed arithmetic.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a range is being unmapped, ask accelerators (e.g. kvm) to synchronize the
dirty bitmap to avoid losing information forever.

Fixes grub2 screen update.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace width/height globals with the identical values from real_screen,
refactor the function according to our coding style.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

No functional changes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to
scaling the window, these controls always preserve the aspect ratio of
the current console.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Not grabbing the input means that special keys like ALT+TAB are still
handled by the host. Improve the usability by grabbing input once the
mouse is inside the guest screen, provided the SDL window has the input
focus. Release it again when the mouse is moved to any border. Also grab
the input when we gain the input focus and the mouse is within the
screen limits.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Restore the cursor when switching from graphic to text console while the
mouse is in absolute mode. Disable it again when returning.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's confusing to suddenly find two mice in full screen mode when
switching consoles or accidentally hitting the grab hot keys.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There were some preexisting bits that released the input when switching
to text console. This patch spreads this logic consistently and also
avoids grabbing the input while a text console is active.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This ensures that we actually enter full screen on startup when e.g.
'-vga none -full-screen' was specified.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There must be no difference between initial -full-screen and switching
to this mode via the hot key.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Save the scaling mode and its geometry when going full screen, restore
it when returning to windowed mode.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When switching to full screen mode from a scaled window, we need to
resize to DisplayState's dimension, not the scaled "real" screen size.
Moreover, scaling mode may have manipulated the bpp. So we need to
restore it from the DisplayState as well.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Prevents screen flickering.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This prevents continuous resizing events and improper screen setups when
going full screen.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Just like the monitor does, we need to clear no_shutdown before calling
qemu_system_shutdown_request on quit requests. Otherwise, QEMU just
stops the VM.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When compiling with gcc 4.6, some code in fw_cfg.c complains that fop_ret
is assigned but not used (which is true).  However, it looks like the
meaningless assignments to fop_ret were done to suppress other gcc warnings
due to the fact that fread() is labelled as warn_unused_result in glibc.

This patch avoids both errors, by actually checking the fread() result code
and dropping out with an error message if it fails.
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When loading an internal snapshot whose L1 table is smaller than the current L1
table, the size of the current L1 would be shrunk to the snapshot's L1 size in
memory, but not on disk. This lead to incorrect refcount updates and eventuelly
to image corruption.

Instead of writing the new L1 size to disk, this simply retains the bigger L1
size that is currently in use and makes sure that the unused part is zeroed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NPhilipp Hahn <hahn@univention.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The expiration timeout must only affect packets that are queued due to
pending ARP resolutions. The old version broke ping e.g.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

No need to update the current time for each packet we send from the
queue. Processing time is comparably short.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Should be uint32_t for IPv4, not int. Also avoid in_addr_t without
proper includes. Fixes build regression on mingw32.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>