Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Two reset fixes:
  * pick up s->usbcmd value after ehci_reset call to make sure it
    keeps the reset value and doesn't get rubbish filled in when
    val is written back to the mmio register array later on.
  * make sure the frame timer is zapped on reset.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Activate usb hid pointer devices (mouse+tablet) unconditionally
on polls, even if we NAK the poll due to lack of new events.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Static code analysers expect these comments for case statements without
a break statement.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

On some systems (notably ARM Linux) glibc provides implementations
of makecontext(), getcontext() and friends which are stubs which
always return failure. Make the configure test for makecontext()
also check for the presence of the __stub_makecontext macro which
indicates the presence of these stubs, so we can avoid trying to use
them and fall back to a different coroutine implementation instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix a bug (introduced in commit a0abe474) where a command line which
specified no machine arguments (either explicitly or implicitly via
-kernel &co) would result in a segfault because of a NULL pointer
returned from qemu_opts_find(qemu_find_opts("machine"), 0).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These days one just needs to specify the romfile in PCiDeviceInfo and
everything magically works.  It also allows to disable pxe rom loading
via "romfile=<emptystring>" like it is possible for all other nics.

[ v2: rebased & adapted to qom changes ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds --{enable,disable}-debug-info switches to configure
which allows to include/exclude the '-g' switch on the gcc & ld
command lines.  Not building debug info reduces ressource usage
(especially disk) alot and is quite useful for test builds.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The code in console.c verifies whenever a screen_dump function
pointer is present before calling it, so there is no need to supply an
dummy function.  Remove them.  Also report an error to notify the user
that he didn't got a screenshot.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The displaychangelistener isn't needed at all, we can simply save the
image when vga_hw_update is done instead of hooking into the update
process.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Send qmp events on suspend and wakeup so libvirt
has a chance to track the vm state.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make the acpi timer wake up the guest.
Guests can enable/disable this via acpi too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make the rtc wake up the guest when the alarm fires.
Add acpi windup to property support RTC_EN, so guests
can enable and disable this.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a 'wakeup' property to the serial port.  It is off by default.  When
enabled any incoming character on the serial line will wake up the
guest.  Useful for guests which have a serial console configured.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds wakeup support to ps/2 emulation.  Any key press on the
ps/2 keyboard will wakeup the guest.  Likewise any mouse button press
will wakeup the guest.  Mouse moves are ignored, so the guest will not
wakeup in case your mouse crosses the vnc window of a suspended guest by
accident.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch switches pc s3 suspend over to the new infrastructure.
The cmos_s3 qemu_irq is killed, the new notifier is used instead.
The xen hack goes away with that too, the hypercall can simply be
done in a notifier function now.

This patch also makes the guest actually stay suspended instead
of leaving suspend instantly, so it is useful for more than just
testing whenever the suspend/resume cycle actually works.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds some infrastructure to handle suspend and resume to
qemu.  First there are two functions to switch state and second there
is a suspend notifier:

 * qemu_system_suspend_request is supposed to be called when the
   guest asks for being be suspended, for example via ACPI.

 * qemu_system_wakeup_request is supposed to be called on events
   which should wake up the guest.

 * qemu_register_suspend_notifier can be used to register a notifier
   which will be called when the guest is suspended.  Machine types
   and device models can hook in there to modify state if needed.

 * qemu_register_wakeup_notifier can be used to register a notifier
   which will be called when the guest is woken up.  Machine types
   and device models can hook in there to modify state if needed.

 * qemu_system_wakeup_enable can be used to enable/disable wakeup
   events.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Do APCIREGS->pm1.evt.en updates using the new acpi_pm1_evt_write_en
function, so the acpi code will see those updates.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Pretty pointless, can easily be reached via ACPIREGS now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All those acpi structs are not independent from each other.
Various acpi functions expecting multiple acpi structs passed
in are a clean indicator for that ;)

So this patch bundles all acpi structs in the new ACPIREGS
struct, then use it everythere pass around acpi state.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Group all structs at the top of hw/acpi.h.
Just moving around lines, no code changes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* stefanha/trivial-patches:
  slirp/misc: fix gcc __warn_memset_zero_len warnings
  vl.c: Increase width of machine name column in "-M ?" output
  tcg: Remove unneeded include statements

* mdroth/qga-win32-pull-2-23-12:
  qemu-ga: add win32 guest-shutdown command
  qemu-ga: add Windows service integration
  qemu-ga: add initial win32 support
  qemu-ga: fixes for win32 build of qemu-ga
  qemu-ga: rename guest-agent-commands.c -> commands-posix.c
  qemu-ga: separate out common commands from posix-specific ones
  qemu-ga: move channel/transport functionality into wrapper class
  qemu-ga: Add schema documentation for types

* qmp/queue/qmp:
  qmp: add DEVICE_TRAY_MOVED event
  ide: drop ide_tray_state_post_load()
  block: Don't call bdrv_eject() if the tray state didn't change
  block: bdrv_eject(): Make eject_flag a real bool
  block: Rename bdrv_mon_event() & BlockMonEventAction

* kwolf/for-anthony: (46 commits)
  qemu-iotests: common.config: Allow use of arbitrary qemu* paths
  qemu-iotests: check: print relevant path information
  qemu-iotests: test loading internal snapshots
  qemu-iotests: Update filter for default cluster size
  qemu-iotests: add qed support to 025 image resize test
  qemu-iotests: Update rbd support
  qemu-iotests: common.config: Fix no $TEST_DIR directory
  qemu-iotests: only run 016 for file and sheepdog protocols
  qemu-iotests: Use zero-based offsets for IO patterns
  qemu-iotests: add support for rbd and sheepdog protocols
  qemu-iotests: filter IMGFMT correctly in 019
  qemu-iotests: README: Fix spelling
  qemu-iotests: add support for qed format
  qemu-iotests: filter TEST_DIR correctly in 019
  qemu-iotests: fix 019 golden output
  qemu-iotests: update expected results after qemu-img changes
  qemu-iotests: add read/write from smaller backing image test
  qemu-iotests: add sub-cluster allocating write test for sparse image formats
  qemu-iotests: improve test for qemu-img convert with backing file
  qemu-iotests: consider more cases in parsing qemu-io output
  ...

* bonzini/virtio-scsi:
  scsi-block: always use scsi_generic_ops for cache != none
  scsi: fix searching for an empty id
  scsi: fix wrong return for target INQUIRY
  virtio-scsi: add migration support
  virtio-scsi: process control queue requests
  virtio-scsi: add basic SCSI bus operation
  virtio-scsi: Add basic request processing infrastructure
  virtio-scsi: Add virtio-scsi stub device
  scsi-disk: add migration support
  scsi-generic: add migration support
  scsi: add SCSIDevice vmstate definitions
  scsi-disk: enable scatter/gather functionality
  scsi: add scatter/gather functionality
  scsi: pass residual amount to command_complete
  ahci: use new DMA helpers
  dma-helpers: add accounting wrappers
  dma-helpers: add dma_buf_read and dma_buf_write
  dma-helpers: make QEMUSGList target independent

Move the logic to transform the 48-char model ID into the 12-word model
value into a helper.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move the logic for setting the stepping field into a helper function.

To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous stepping values first.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move the logic for setting the model and extended model fields
into a helper function.

To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous model values first.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move the logic for setting the family and extended family into a
helper function.

To make the helper self-contained and in preparation of future
unordered/multiple uses, mask out any previous family values first.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Simply use consoles[] instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I'm trying to improve this code's error reporting, and the debug code
is getting in my way: it clutters the code, it clobbers errno in
inconvenient places, and it uses the same fprintf() both for error
reporting and debug output in a few places.

Get rid of it.  Once decent error reporting is in place, adding back
whatever debug code we need shouldn't be hard.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Stash away the option argument with add_device_config(), so we still
have its location when we get around to parsing it.

This doesn't improve any messages I can see just yet, but that'll
change shortly.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These are -bt, -serial, -virtcon, -parallel, -debugcon, -usbdevice.
Improves messages emitted via proper error reporting interfaces.  For
instance:

    $ qemu-system-x86_64 -nodefaults -S -usb -usbdevice net:vlan=xxx
    qemu-system-x86_64: Parameter 'vlan' expects a number

becomes:

    qemu-system-x86_64: -usbdevice net:vlan=xxx: Parameter 'vlan' expects a number

Many more remain unimproved, because they're fprintf()ed.  The next
few commits will take care of that.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cleaned up silently in commit aad04cd0, but that just got reverted.
Re-apply this part.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixed silently in commit aad04cd0, but that just got reverted.
Re-apply the fixes, plus one missed instance: parport on Linux.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>