- 15 3月, 2012 40 次提交
-
-
由 David Gibson 提交于
The 'bars' constant array was used in experimental device allocation code which is no longer necessary now that we always run the SLOF firmware. This patch removes the now redundant variable. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
This patch updates the SLOF firmware image used on the pseries machine. The new version adds support for Cirrus VGA and virtfs, as well as including a number of bugfixes. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Thomas Huth 提交于
These instructions for loading and storing byte-swapped 64-bit values have been introduced in PowerISA 2.06. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
For the pseries machine, TCE (IOMMU) tables can either be directly malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed from a KVM ioctl. The latter option is used when available, because it allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated. However, even when KVM is persent, TCE acceleration is not always possible. Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out of contiguous memory to allocate the new table. In this case we need to fall back on the malloc()ed table. When a device is removed, and we need to remove the TCE table, we need to either munmap() or free() the table as appropriate for how it was allocated. The code is supposed to do that, but we buggily fail to initialize the tcet->fd variable in the malloc() case, which is used as a flag to determine which is the right choice. This patch fixes the bug, and cleans up error messages relating to this path while we're at it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Stefan Weil 提交于
spin_rw_ops is only used in hw/ppce500_spin.c. Signed-off-by: NStefan Weil <sw@weilnetz.de> Acked-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When trying to run a ppc405 guest, it segfaults quite quickly, trying to access timers that weren't initialized. Initialize them properly instead. Reported-by: NAndreas Faerber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alex Barcelo 提交于
All architectures work the same way, and all check for sas_ss_flags == 0. The powerpc lines are wrong, and do the check the other way round (it's a qemu internal check, which is done wrong only for this architecture, it's more a typo than a bug). It's NOT ppc specific, it's POSIX standard (sigaltstack) and qemu internal. I have a test source that I will send in a follow-up (it's longer than I would have wished, I'm sure that a better test case can be written if needed) Signed-off-by: NAlex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Andreas Färber 提交于
Commit 9b9a970a (target-lm32/microblaze: Typedef struct CPU{MB,LM32}State) introduced necessary typedefs for cpu_mmu_index() and mmu.h respectively. On some GCC versions this leads to "error: redefinition of typedef". Drop the original typedef to hopefully fix the build. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* afaerber/qom-cpu.v5: (43 commits) qom: Introduce CPU class Rename CPUState -> CPUArchState xtensa hw/: Don't use CPUState sparc hw/: Don't use CPUState sh4 hw/: Don't use CPUState s390x hw/: Don't use CPUState ppc hw/: Don't use CPUState mips hw/: Don't use CPUState microblaze hw/: Don't use CPUState m68k hw/: Don't use CPUState lm32 hw/: Don't use CPUState i386 hw/: Don't use CPUState cris hw/: Don't use CPUState arm hw/: Don't use CPUState alpha hw/: Don't use CPUState xtensa-semi: Don't use CPUState m68k-semi: Don't use CPUState arm-semi: Don't use CPUState target-xtensa: Don't overuse CPUState target-unicore32: Don't overuse CPUState ...
-
由 Stefan Weil 提交于
This fixes memory reads and writes which exceeded the upper limit of allocated memory vd->guest.ds->data and vd->server->data. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Corentin Chary 提交于
The threaded VNC servers messed up with QEMU fd handlers without any kind of locking, and that can cause some nasty race conditions. Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(), which will wait for the current job queue to finish, can be called with the iothread lock held. Instead, we now store the data in a temporary buffer, and use a bottom half to notify the main thread that new data is available. vnc_[un]lock_ouput() is still needed to access VncState members like abort, csock or jobs_buffer. Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Reintroduce CPUState as QOM object: It's abstract and derived directly from TYPE_OBJECT for compatibility with the user emulators. The identifier CPUState avoids conflicts between CPU() and the struct. Introduce $(qom-twice-y) to build it separately for system and for user emulators. Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper. Signed-off-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/xtensa_*.[hc]; do sed -i "s/CPUState/CPUXtensaState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/sun4m.c hw/sun4u.c hw/grlib.h hw/leon3.c; do sed -i "s/CPUState/CPUSPARCState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/sh.h hw/shix.c hw/r2d.c; do sed -i "s/CPUState/CPUSH4State/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/s390-*.[hc]; do sed -i "s/CPUState/CPUS390XState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do sed -i "s/CPUState/CPUPPCState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/mips_*.[hc]; do sed -i "s/CPUState/CPUMIPSState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/microblaze_*.[hc] hw/petalogix_ml605_mmu.c hw/petalogix_s3adsp1800_mmu.c; do sed -i "s/CPUState/CPUMBState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/an5206.c hw/dummy_m68k.c hw/mcf.h hw/mcf5206.c hw/mcf5208.c hw/mcf_intc.c; do sed -i "s/CPUState/CPUM68KState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/lm32_boards.c hw/milkymist.c; do sed -i "s/CPUState/CPULM32State/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do sed -i "s/CPUState/CPUX86State/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/cris-boot.[hc] hw/cris_pic_cpu.c hw/axis_dev88.c hw/etraxfs.h hw/etraxfs_ser.c; do sed -i "s/CPUState/CPUCRISState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/arm-misc.h hw/arm_boot.c hw/arm_pic.c hw/armv7m.c hw/exynos4210.h hw/highbank.c hw/integratorcp.c hw/musicpal.c hw/omap.h hw/pxa.h hw/pxa2xx_gpio.c hw/pxa2xx_pic.c hw/realview.c hw/strongarm.h hw/versatilepb.c hw/vexpress.c hw/xilinx_zynq.c ; do sed -i "s/CPUState/CPUARMState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: for file in hw/alpha_*.[hc]; do sed -i "s/CPUState/CPUAlphaState/g" $file done Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" xtensa-semi.c Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" m68k-semi.c Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUARMState/g" arm-semi.c Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc] sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUUniCore32State/g" target-unicore32/*.[hc] sed -i "s/#define CPUUniCore32State/#define CPUState/" target-unicore32/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc] sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc] sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc] sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUMBState/g" target-microblaze/*.[hc] sed -i "s/#define CPUMBState/#define CPUState/" target-microblaze/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" target-m68k/*.[hc] sed -i "s/#define CPUM68KState/#define CPUState/" target-m68k/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPULM32State/g" target-lm32/*.[hc] sed -i "s/#define CPULM32State/#define CPUState/" target-lm32/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc] sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-