- 08 8月, 2011 12 次提交
-
-
由 Avi Kivity 提交于
get_system_io() returns the root I/O memory region. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. We have to keep vga_mem_{read,write}b() since they're used by cirrus. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Convert all vga memory to the memory API. Note we need to fall back to get_system_memory(), since the various buses don't pass the vga window as a memory region. We no longer need to sync the dirty bitmap of the cirrus mapped memory banks, since the memory API takes care of that for us. [jan: fix vga-pci logging] Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
We're going to remove the callback, so we can't use it to save the address. Use the pci API instead. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Some (hacky) devices that have a back-channel to read this address back outside the normal configuration mechanisms, such as VMware svga. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
For consistency with other _END_OF_LIST macros. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
git://git.qemu.org/qemu由 malc 提交于
-
- 07 8月, 2011 6 次提交
-
-
由 Brad 提交于
Fix forcing multicast msgs to loopback on OpenBSD. e.g. $ sudo qemu -m 128 -no-fd-bootchk \ -hda virtual.img -boot n -nographic \ -net nic,vlan=0,model=rtl8139,macaddr=52:54:00:12:34:03 \ -net user -tftp /usr/src/sys/arch/i386/compile/TEST -bootp pxeboot \ -net nic,vlan=1,model=rtl8139,macaddr=52:54:00:23:03:01 \ -net tap,vlan=1,script=no \ -net nic,vlan=3,model=rtl8139,macaddr=52:54:00:23:03:03 \ -net socket,vlan=3,mcast=230.0.0.1:10003 setsockopt(SOL_IP, IP_MULTICAST_LOOP): Invalid argument qemu: -net socket,vlan=3,mcast=230.0.0.1:10003: Device 'socket' could not be initialized Signed-off-by: NBrad Smith <brad@comstyle.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Tobias Nygren 提交于
Use mmap to allocate executable memory on NetBSD as well. Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Manuel Bouyer 提交于
Fix network interface tap backend work on NetBSD. It uses an ioctl to get the tap name. Signed-off-by: Christoph Egger<Christoph.Egger@amd.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
cppcheck report: darwin-user/signal.c:322: style: Unused variable: i darwin-user/signal.c:322: style: Variable 'err' is assigned a value that is never used Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Copy propagation introduced in 22613af4 considered only global registers. However, register temps and stack allocated locals must be handled differently because register temps don't survive across brcond. Fix by propagating only within same class of temps. Tested-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 8月, 2011 4 次提交
-
-
由 Artyom Tarasenko 提交于
Check whether dc->npc is dynamic before using its value for branch. Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Anthony Liguori 提交于
-
由 Stuart Yoder 提交于
When overriding a tool name via a shell variable, don't tack on the cross-prefix. This specifically allows the pkg-config command to be overridden and work where it does not exist in some cross build environments. Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
If migration failed in migrate_fd_put_buffer, the monitor may have been resumed not only in the error path of that function but also once again in migrate_fd_put_ready which is called unconditionally by migrate_fd_connect. Fix this by establishing a cleaner policy: the monitor shall be resumed when the migration file is closed, either via callback (migrate_fd_close) or in migrate_fd_cleanup if no file is open (i.e. no callback invoked). Reported-By: NMichael Tokarev <mjt@tls.msk.ru> Tested-By: NMichael Tokarev <mjt@tls.msk.ru> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 8月, 2011 18 次提交
-
-
由 Isaku Yamahata 提交于
qbus_reset_all_fn was registered twice, so a lot of device reset functions were also called twice when QEMU started. Which was introduced by 80376c3f This patch fixes it by making the main_system_bus creation not register reset handler. Cc: Stefan Weil <weil@mail.berlios.de> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Tested-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Do not allocate TCG-only resources like the translation buffer when running over KVM or XEN. Saves a "few" bytes in the qemu address space and is also conceptually cleaner. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
When trying to map an alias of a ram region, where the alias starts at address A and we map it into address B, and A > B, we had an arithmetic underflow. Because we use unsigned arithmetic, the underflow converted into a large number which failed addrrange_intersects() tests. The concrete example which triggered this was cirrus vga mapping the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of the framebuffer) into offsets 0xa0000 (relative to system addres space start). With our favorite analogy of a windowing system, this is equivalent to dragging a subwindow off the left edge of the screen, and failing to clip it into its parent window which is on screen. Fix by switching to signed arithmetic. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
When a range is being unmapped, ask accelerators (e.g. kvm) to synchronize the dirty bitmap to avoid losing information forever. Fixes grub2 screen update. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Replace width/height globals with the identical values from real_screen, refactor the function according to our coding style. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
No functional changes. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to scaling the window, these controls always preserve the aspect ratio of the current console. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Not grabbing the input means that special keys like ALT+TAB are still handled by the host. Improve the usability by grabbing input once the mouse is inside the guest screen, provided the SDL window has the input focus. Release it again when the mouse is moved to any border. Also grab the input when we gain the input focus and the mouse is within the screen limits. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Restore the cursor when switching from graphic to text console while the mouse is in absolute mode. Disable it again when returning. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
It's confusing to suddenly find two mice in full screen mode when switching consoles or accidentally hitting the grab hot keys. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
There were some preexisting bits that released the input when switching to text console. This patch spreads this logic consistently and also avoids grabbing the input while a text console is active. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This ensures that we actually enter full screen on startup when e.g. '-vga none -full-screen' was specified. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
There must be no difference between initial -full-screen and switching to this mode via the hot key. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Save the scaling mode and its geometry when going full screen, restore it when returning to windowed mode. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
When switching to full screen mode from a scaled window, we need to resize to DisplayState's dimension, not the scaled "real" screen size. Moreover, scaling mode may have manipulated the bpp. So we need to restore it from the DisplayState as well. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Prevents screen flickering. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This prevents continuous resizing events and improper screen setups when going full screen. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-