The 'signalled' field in the DRC appears to be entirely a torturous
workaround for the fact that PCI devices were started in UNISOLATED state
for unclear reasons.

1) 'signalled' is already meaningless for logical (so far, all non PCI)
DRCs.  It's always set to true (at least at any point it might be tested),
and can't be assigned any real meaning due to the way signalling works for
logical DRCs.

2) For PCI DRCs, the only time signalled would be false is when non-zero
functions of a multifunction device are hotplugged, followed by function
zero (the other way around is explicitly not permitted). In that case the
secondary function DRCs are attached, but the notification isn't sent to
the guest until function 0 is plugged.

3) signalled being false is used to allow a DRC detach to switch mode
back to ISOLATED state, which allows a secondary function to be hotplugged
then unplugged with function 0 never inserted.  Without this a secondary
function starting in UNISOLATED state couldn't be detached again without
function 0 being inserted, all the functions configured by the guest, then
sent back to ISOLATED state.

4) But now that PCI DRCs start in ISOLATED state, there's nothing to be
done.  If the guest doesn't get the notification, it won't switch the
device to UNISOLATED state, so nothing prevents it from being unplugged.
If the guest does move it to UNISOLATED state without the signal (due to
a manual drmgr call, for instance) then it really isn't safe to unplug it.

So, this patch removes the signalled variable and all code related to it.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

PCI DRCs, and only PCI DRCs, are immediately moved to UNISOLATED isolation
state once the device is attached.  This has been there from the initial
implementation, and it's not clear why.

The state diagram in PAPR 13.4 suggests PCI devices should start in
ISOLATED state until the guest moves them into UNISOLATED, and the code in
the guest-side drmgr tool seems to work that way too.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>

Previously QEMU open-pic implemented the 4 open-pic timers including
all timer registers, but the timers did not "count" or generate any
interrupts.  The patch makes the timers both count and generate
interrupts.  The timer clock frequency is fixed at 25MHZ.

--

Responding to V2 patch comments.
- Simplify clock frequency logic and commentary.
- Remove camelCase variables.
- Timer objects now created at init rather than lazily.
Signed-off-by: NAaron Larson <alarson@ddci.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

In ppc_spapr_reset(), if the guest is using HPT, the code was executing:

    } else {
        spapr->patb_entry = 0;
        spapr_setup_hpt_and_vrma(spapr);
    }

And, at the end of spapr_setup_hpt_and_vrma:

    /* We're setting up a hash table, so that means we're not radix */
    spapr->patb_entry = 0;

Resulting in spapr->patb_entry being assigned to 0 twice in a row.

Given that 'spapr_setup_hpt_and_vrma' is also called inside
'spapr_check_setup_free_hpt' of spapr_hcall.c, this trivial patch removes
the 'patb_entry = 0' assignment from the 'else' clause inside ppc_spapr_reset
to avoid this behavior.
Signed-off-by: NDaniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

ICPState objects were being allocated before CPU thread realization.
However commit 9ed65663 (xics: setup cpu at realize time) reversed it
by allocating ICPState objects after CPU thread is realized. But it
didn't take care to fix the error path because of which we observe
a SIGSEGV when CPU thread realization fails during cold/hotplug.

Fix this by ensuring that we do object_unparent() of ICPState object
only in case when is was created earlier.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

If ppc_cpu_realizefn() fails after cpu_exec_realizefn() has been
called, we will have to undo whatever cpu_exec_realizefn() did
by explicitly calling cpu_exec_unrealizeffn() which is currently
missing. Failure to do this proper cleanup will result in CPU
which was never fully realized to linger on the cpus list causing
SIGSEGV later (for eg when running "info cpus").
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Commit 5bc8d26d ("spapr: allocate the ICPState object from under
sPAPRCPUCore") moved ICPState objects from the machine to CPU cores.
This is an improvement since we no longer allocate ICPState objects
that will never be used. But it has the side-effect of breaking
migration of older machine types from older QEMU versions.

This patch allows spapr to register dummy "icp/server" entries to vmstate.
These entries use a dedicated VMStateDescription that can swallow and
discard state of an incoming migration stream, and that don't send anything
on outgoing migration.

As for real ICPState objects, the instance_id is the cpu_index of the
corresponding vCPU, which happens to be equal to the generated instance_id
of older machine types.

The machine can unregister/register these entries when CPUs are dynamically
plugged/unplugged.

This is only available for pseries-2.9 and older machines, thanks to a
compat property.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The ICPState objects are currently registered to vmstate as qdev objects.
Their instance ids are hence computed automatically in the migration code,
and thus depends on the order the CPU cores were plugged.

If the destination had its CPU cores plugged in a different order than the
source, then ICPState objects will have different instance_ids and load
the wrong state.

Since CPU objects have a reliable cpu_index which is already used as
instance_id in vmstate, let's use it for ICPState as well.

Please note that this doesn't break migration. Older machine types used to
allocate and realize all ICPState objects at machine init time, for the whole
lifetime of the machine. The qdev instance ids are thus 0,1,2... nr_servers
and happen to map to the vCPU indexes.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The mmu fault handler should return 0 if it was able to successfully
handle the fault and a positive value otherwise.

Currently the tcg radix mmu fault handler will return 1 after
successfully handling a fault in virtual mode. This is incorrect
so fix it so that it returns 0 in this case.

The handler already correctly returns 0 when a fault was handled
in real mode and 1 if an interrupt was generated.

Fixes: d5fee0bb ("target/ppc: Implement ISA V3.00 radix page fault handler")
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Since the introduction of MTTCG, using the msgsnd instruction
abort()s if being called without holding the BQL. So let's protect
that part of the code now with qemu_mutex_lock_iothread().

Buglink: https://bugs.launchpad.net/qemu/+bug/1694998Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Fix migration of radix guests by ensuring that we issue
KVM_PPC_CONFIGURE_V3_MMU for radix case post migration.
Reported-by: NNageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Add a "no HPT" encoding (using value -1) to the HTAB migration
stream (in the place of HPT size) when the guest doesn't allocate HPT.
This will help the target side to match target HPT with the source HPT
and thus enable successful migration.
Suggested-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Migrating between different CPU versions is a bit complicated for ppc.
A long time ago, we ensured identical CPU versions at either end by
checking the PVR had the same value.  However, this breaks under KVM
HV, because we always have to use the host's PVR - it's not
virtualized.  That would mean we couldn't migrate between hosts with
different PVRs, even if the CPUs are close enough to compatible in
practice (sometimes identical cores with different surrounding logic
have different PVRs, so this happens in practice quite often).

So, we removed the PVR check, but instead checked that several flags
indicating supported instructions matched.  This turns out to be a bad
idea, because those instruction masks are not architected information, but
essentially a TCG implementation detail.  So changes to qemu internal CPU
modelling can break migration - this happened between qemu-2.6 and
qemu-2.7.  That was addressed by 146c11f1 "target-ppc: Allow eventual
removal of old migration mistakes".

Now, verification of CPU compatibility across a migration basically doesn't
happen.  We simply ignore the PVR of the incoming migration, and hope the
cpu on the destination is close enough to work.

Now that we've cleaned up handling of processor compatibility modes
for pseries machine type, we can do better.  For new machine types
(pseries-2.10+) We allow migration if:

    * The source and destination PVRs are for the same type of CPU, as
      determined by CPU class's pvr_match function
OR  * When the source was in a compatibility mode, and the destination CPU
      supports the same compatibility mode

For older machine types we retain the existing behaviour - current CAS
code will usually set a compat mode which would break backwards
migration if we made them use the new behaviour. [Fixed from an
earlier version by Greg Kurz].
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: NAndrea Bolognani <abologna@redhat.com>

Currently, the CPU compatibility mode is set when the cpu is initialized,
then again when the guest negotiates features.  This means if a guest
negotiates a compatibility mode, then reboots, that compatibility mode
will be retained across the reset.

Usually that will get overridden when features are negotiated on the next
boot, but it's still not really correct.  This patch moves the initial set
up of the compatibility mode from cpu init to reset time.  The mode *is*
retained if the reboot was caused by the feature negotiation (it might
be important in that case, though it's unlikely).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: NAndrea Bolognani <abologna@redhat.com>

Server class POWER CPUs have a "compat" property, which is used to set the
backwards compatibility mode for the processor.  However, this only makes
sense for machine types which don't give the guest access to hypervisor
privilege - otherwise the compatibility level is under the guest's control.

To reflect this, this removes the CPU 'compat' property and instead
creates a 'max-cpu-compat' property on the pseries machine.  Strictly
speaking this breaks compatibility, but AFAIK the 'compat' option was
never (directly) used with -device or device_add.

The option was used with -cpu.  So, to maintain compatibility, this
patch adds a hack to the cpu option parsing to strip out any compat
options supplied with -cpu and set them on the machine property
instead of the now deprecated cpu property.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Tested-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Tested-by: NGreg Kurz <groug@kaod.org>
Tested-by: NAndrea Bolognani <abologna@redhat.com>

This may be used for deprecated object properties that are kept for
backwards compatibility.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Tested-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

When using the 40p machine, soundhw_init() is currently called twice,
one time from vl.c and one time from ibm_40p_init(). The call in
ibm_40p_init() was likely just a copy-and-paste from a old version
of the prep machine - but there the call to audio_init() (which was
the previous name of this function) has been removed many years ago
already, with commit b3e6d591
("audio: enable PCI audio cards for all PCI-enabled targets"), so
we certainly also do not need the soundhw_init() in the 40p function
anymore nowadays.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NSahid Ferdjaoui <sferdjao@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

HMP pull 2017-06-29

# gpg: Signature made Thu 29 Jun 2017 17:27:55 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-hmp-20170629:
  Add chardev-send-break monitor command
  monitor: Add -a (all) option to info registers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: NStefan Fritsch <sf@sfritsch.de>
Acked-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
  Use 'send a break' in all 3 pieces of text as suggested by eblake

The info registers command in the qemu monitor is used to dump register
values.

Currently this command uses the monitor cpu (which can be set by the
user) as the cpu for whose registers will be dumped. Sometimes it is
useful to see the registers for all cpus and currently this requires
setting the monitor cpu and the re-running the command for each cpu
in the system. I would be nice if there was an easier way to do this.

Add the "-a" option to the info registers command to dump the register
values for all cpus.
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>

Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

- fixes a minor bug that could possibly prevent old guests to remove
  directories
- makes default permissions for new files configurable from the cmdline
  when using mapped security modes
- handle transport errors
- g_malloc()+memcpy() converted to g_memdup()

# gpg: Signature made Thu 29 Jun 2017 14:12:42 BST
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  9pfs: handle transport errors in pdu_complete()
  xen-9pfs: disconnect if buffers are misconfigured
  virtio-9p: break device if buffers are misconfigured
  virtio-9p: message header is 7-byte long
  virtio-9p: record element after sanity checks
  9pfs: replace g_malloc()+memcpy() with g_memdup()
  9pfs: local: Add support for custom fmode/dmode in 9ps mapped security modes
  9pfs: local: remove: use correct path component
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The [NSEvent modifierFlags] method returns an NSEventModifierFlags type value in Mac OS 10.10. It use to be of type NSUInteger. Replacing NSEventModifierFlags with NSUInteger allows for the cooca.m file to be compiled on older versions of Mac OS. This patch was been tested on Mac OS 10.6 and Mac OS 10.12 without problem.
Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Message-id: F6C36C1A-4661-48F4-BEA6-3994889927D0@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Contrary to what is written in the comment, a buggy guest can misconfigure
the transport buffers and pdu_marshal() may return an error.  If this ever
happens, it is up to the transport layer to handle the situation (9P is
transport agnostic).

This fixes Coverity issue CID1348518.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>

Implement xen_9pfs_disconnect by unbinding the event channels. On
xen_9pfs_free, call disconnect if any event channels haven't been
disconnected.

If the frontend misconfigured the buffers set the backend to "Closing"
and disconnect it. Misconfigurations include requesting a read of more
bytes than available on the ring buffer, or claiming to be writing more
data than available on the ring buffer.
Signed-off-by: NStefano Stabellini <stefano@aporeto.com>
Signed-off-by: NGreg Kurz <groug@kaod.org>

The 9P protocol is transport agnostic: if the guest misconfigured the
buffers, the best we can do is to set the broken flag on the device.
Signed-off-by: NGreg Kurz <groug@kaod.org>

The 9p spec at http://man.cat-v.org/plan_9/5/intro reads:

 "Each 9P message begins with a four-byte size field specify-
  ing the length in bytes of the complete message including
  the four bytes of the size field itself.  The next byte is
  the message type, one of the constants in the enumeration in
  the include file <fcall.h>.  The next two bytes are an iden-
  tifying tag, described below."

ie, each message starts with a 7-byte long header.

The core 9P code already assumes this pretty much everywhere. This patch
does the following:
- makes the assumption explicit in the common 9p.h header, since it isn't
  related to the transport
- open codes the header size in handle_9p_output() and hardens the sanity
  check on the space needed for the reply message
Signed-off-by: NGreg Kurz <groug@kaod.org>
Acked-by: NStefano Stabellini <sstabellini@kernel.org>

If the guest sends a malformed request, we end up with a dangling pointer
in V9fsVirtioState. This doesn't seem to cause any bug, but let's remove
this side effect anyway.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

In mapped security modes, files are created with very restrictive
permissions (600 for files and 700 for directories). This makes
file sharing between virtual machines and users on the host rather
complicated. Imagine eg. a group of users that need to access data
produced by processes on a virtual machine. Giving those users access
to the data will be difficult since the group access mode is always 0.

This patch makes the default mode for both files and directories
configurable. Existing setups that don't know about the new parameters
keep using the current secure behavior.
Signed-off-by: NTobias Schramm <tobleminer@gmail.com>
Signed-off-by: NGreg Kurz <groug@kaod.org>

Commit a0e640a8 introduced a path processing error.
Pass fstatat the dirpath based path component instead
of the entire path.
Signed-off-by: NBruce Rogers <brogers@suse.com>
Signed-off-by: NGreg Kurz <groug@kaod.org>

migration/next for 20170628

# gpg: Signature made Wed 28 Jun 2017 12:16:44 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20170628:
  exec: fix access to ram_list.dirty_memory when sync dirty bitmap
  migration: add "return-path" capability
  vmstate: error hint for failed equal checks
  migration: add comment for TYPE_MIGRATE
  migration: hmp: dump globals
  migration: merge enforce_config_section somewhat
  migration: move skip_section_footers
  migration: move skip_configuration out
  migration: move only_migratable to MigrationState
  migration: move global_state.optional out
  migration: let MigrationState be a qdev
  vl: clean up global property registration
  accel: introduce AccelClass.global_props
  machine: export register_compat_prop()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Xen 2017/06/27

# gpg: Signature made Tue 27 Jun 2017 23:02:43 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg:                 aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20170627-tag:
  xen-disk: add support for multi-page shared rings
  xen-disk: only advertize feature-persistent if grant copy is not available
  xen/disk: don't leak stack data via response ring
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The 32-bit PPC auxv is a bit complicated because in the
mists of time it used to be 16-aligned rather than directly
after the environment. Older glibc versions had code to
try to probe for whether it needed alignment or not:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c;hb=e84eabb3871c9b39e59323bf3f6b98c2ca9d1cd0
and the kernel has code which puts some magic entries at
the bottom to ensure that the alignment probe fails:
http://elixir.free-electrons.com/linux/latest/source/arch/powerpc/include/asm/elf.h#L158

QEMU has similar code too, but it was broken by commit
7c4ee5bc, which changed elfload.c from filling in
the auxv starting at the highest address and working down
to starting at the lowest address and working up. This
means that the ARCH_DLINFO hook must now be invoked first
rather than last, and the entries in it for PPC must
be reversed so that the magic AT_IGNOREPPC entries come
at the lowest address in the auxv as they should.

The effect of this was that if running a guest binary that
used an old glibc with the alignment probing the guest ld.so
code would segfault if the size of the guest environment and
argv happened to put the auxv at an address that triggered
the alignment code in the guest glibc.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1498582198-6649-1-git-send-email-peter.maydell@linaro.org

In cpu_physical_memory_sync_dirty_bitmap(rb, start, ...), the 2nd
argument 'start' is relative to the start of the ramblock 'rb'. When
it's used to access the dirty memory bitmap of ram_list (i.e.
ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION]->blocks[]), an offset to
the start of all RAM (i.e. rb->offset) should be added to it, which has
however been missed since c/s 6b6712ef. For a ramblock of host memory
backend whose offset is not zero, cpu_physical_memory_sync_dirty_bitmap()
synchronizes the incorrect part of the dirty memory bitmap of ram_list
to the per ramblock dirty bitmap. As a result, a guest with host
memory backend may crash after migration.

Fix it by adding the offset of ramblock when accessing the dirty memory
bitmap of ram_list in cpu_physical_memory_sync_dirty_bitmap().
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20170628083704.24997-1-haozhong.zhang@intel.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

When this capability is enabled, QEMU will use the return path even for
precopy migration. This is helpful at least in one case when destination
failed to load the image while source quited without confirmation. With
return path, source will wait for the last response from destination,
and if destination fails, it'll fail the migration on source, then the
guest can be run again on the source (rather than assuming to be good,
then the guest will be lost after source quits).

It needs to be enabled explicitly on source, otherwise disabled.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.

Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

It'll be strange that the migration object inherits TYPE_DEVICE. Add
some explanations to it.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1498634144-26508-1-git-send-email-peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Now we have some globals that can be configured for migration. Dump them
in HMP info migration for better debugging.

(we can also use this to monitor whether COMPAT fields are applied
correctly on compatible machines)
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

These two parameters:

- MachineState::enforce_config_section
- MigrationState::send_configuration

are playing similar role here. This patch merges the first one into
second, then we'll have a single place to reference whether we need to
send the configuration section.

I didn't remove the MachineState.enforce_config_section field since when
applying that machine property (in machine_set_property()) we haven't
yet initialized global properties and migration object. Then, it's
still not easy to pass that boolean to MigrationState at such an early
time.

A natural benefit for current patch is that now we kept the meaning of
"enforce-config-section" since it'll still have the highest
priority (that's what "enforce" mean I guess).
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-10-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.

Removing savevm_skip_section_footers().
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>