- 25 9月, 2013 7 次提交
-
-
由 Fam Zheng 提交于
We use the extent size as cluster size for flat extents (where no L1/L2 table is allocated so it's safe) reuse sector calculating code with sparse extents. Don't pass in the cluster size for adding flat extent, just set it to sectors later, then the cluster size checking will not fail. The cluster_sectors is changed to int64_t to allow big flat extent. Without this, flat extent opening is broken: # qemu-img create -f vmdk -o subformat=monolithicFlat /tmp/a.vmdk 100G Formatting '/tmp/a.vmdk', fmt=vmdk size=107374182400 compat6=off subformat='monolithicFlat' zeroed_grain=off # qemu-img info /tmp/a.vmdk image: /tmp/a.vmdk file format: raw virtual size: 0 (0 bytes) disk size: 4.0K Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Peter Lieven 提交于
Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Peter Lieven 提交于
if the call is invoked through bdrv_is_allocated the caller might expect *pnum = 0 on error. however, a new implementation of bdrv_get_block_status might only return a negative exit value on error while keeping *pnum untouched. Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
When trying to update the refcounts for a snapshot, the return value of update_refcount on a compressed cluster was pretty much ignored, cancelling the update on error but returning 0. This is caused by an inner "ret" variable shadowing the outer one (the latter is used in the return statement). Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Test 052 uses qemu-io -s which will result in bdrv_open trying to create a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs do not work well together, disable this test for -nocache. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Test that backing.file.filename option can be parsed and override the backing file from image (backing file reflected with "info block"). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Providing backing.file.filename doesn't override backing file as expected: $ x86_64-softmmu/qemu-system-x86_64 -drive \ file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2 qemu-system-x86_64: -drive \ file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2: could not open disk image /tmp/child.qcow2: Can't specify 'file' and 'filename' options at the same time With $ qemu-img info /tmp/child.qcow2 image: /tmp/child.qcow2 file format: qcow2 virtual size: 1.0G (1073741824 bytes) disk size: 196K cluster_size: 65536 backing file: /tmp/fake.qcow2 This fixes it by calling bdrv_get_full_backing_filename only if backing.file.filename is not provided. Also save the backing file name to bs->backing_file so the information is correct with HMP "info block". Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 24 9月, 2013 6 次提交
-
-
由 Anthony Liguori 提交于
# By Alexey Kardashevskiy # Via Stefan Hajnoczi * stefanha/tracing: kvm: fix traces to use %x instead of %d Message-id: 1379699931-5837-1-git-send-email-stefanha@redhat.com
-
由 Anthony Liguori 提交于
# By Aurelien Jarno (1) and Vincenzo Maffione (1) # Via Stefan Hajnoczi * stefanha/net: e1000: NetClientInfo.receive_iov implemented pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN Message-id: 1379699613-5338-1-git-send-email-stefanha@redhat.com
-
由 Anthony Liguori 提交于
# By Stefan Hajnoczi (4) and others # Via Stefan Hajnoczi * stefanha/block: virtio-blk: do not relay a previous driver's WCE configuration to the current blockdev: do not default cache.no-flush to true block: don't lose data from last incomplete sector qcow2: Correct snapshots size for overlap check coroutine: fix /perf/nesting coroutine benchmark coroutine: add qemu_coroutine_yield benchmark qemu-timer: do not take the lock in timer_pending qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe qemu-timer: drop outdated signal safety comments osdep: warn if open(O_DIRECT) on fails with EINVAL libcacard: link against qemu-error.o for error_report() Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
-
由 Anthony Liguori 提交于
# By Stefan Weil (8) and others # Via Michael Tokarev * mjt/trivial-patches: tests/.gitignore: ignore test-throttle exec: Fix broken build for MinGW (regression) kvm: Fix compiler warning (clang) tcg-sparc: Fix parenthesis warning Makefile: Remove some more files when cleaning target-i386: Fix segment cache dump iov: avoid "orig_len may be used unitialized" warning vscclient: remove unnecessary use of uninitialized variable trace-events: Clean up with scripts/cleanup-trace-events.pl again tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) *-user: Improve documentation for lock_user function MAINTAINERS: Add missing entry to filelist for TCI target translate-all: Fix formatting of dump output *-user: Fix typo in comment (ulocking -> unlocking) docs: Fix IO port number for CPU present bitmap. q35: Fix typo in constant DEFUALT -> DEFAULT. configure: Undefine _FORTIFY_SOURCE prior using it Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
-
由 Anthony Liguori 提交于
# By Alexey Kardashevskiy (3) and others # Via Paolo Bonzini * qemu-kvm/uq/master: target-i386: add feature kvm_pv_unhalt linux-headers: update to 3.12-rc1 target-i386: forward CPUID cache leaves when -cpu host is used linux-headers: update to 3.11 kvm: fix traces to use %x instead of %d kvmvapic: Clear also physical ROM address when entering INACTIVE state kvmvapic: Enter inactive state on hardware reset kvmvapic: Catch invalid ROM size kvm irqfd: support direct msimessage to irq translation fix steal time MSR vmsd callback to proper opaque type kvm: warn if num cpus is greater than num recommended cpu: Move cpu state syncs up into cpu_dump_state() exec: always use MADV_DONTFORK Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
-
由 Anthony Liguori 提交于
# By Hervé Poussineau (5) and Stefan Weil (1) # Via Paolo Bonzini * bonzini/scsi-next: block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi lsi: add 53C810 variant lsi: remove todo lsi: ignore write accesses to CTEST0 registers lsi: check ssid versus sdid only if ssid is valid lsi: use constant name instead of its value
-
- 21 9月, 2013 23 次提交
-
-
由 Alexey Kardashevskiy 提交于
KVM request types are normally defined using hex constants but QEMU traces print decimal values instead, which is not very convenient. This changes the request type format from %d to %x. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Vincenzo Maffione 提交于
This patch implements the NetClientInfo.receive_iov method for the e1000 device emulation. In this way a network backend that uses qemu_sendv_packet() can deliver the fragmented packet without requiring an additional copy in the frontend/backend network code (nc_sendv_compat() function). The existing method NetClientInfo.receive has been reimplemented using the new method. Signed-off-by: NVincenzo Maffione <v.maffione@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Aurelien Jarno 提交于
Now that the memory subsystem is propagating the endianness correctly, the pcnet-pci device should have its I/O ports and MMIO memory marked as LITTLE_ENDIAN, as PCI devices are little endian. This makes the pcnet-pci NIC to work again on big endian MIPS Malta (default NIC). Cc: qemu-stable@nongnu.org Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
The following sequence happens: - the SeaBIOS virtio-blk driver does not support the WCE feature, which causes QEMU to disable writeback caching - the Linux virtio-blk driver resets the device, finds WCE is available but writeback caching is disabled; tells block layer to not send cache flush commands - the Linux virtio-blk driver sets the DRIVER_OK bit, which causes writeback caching to be re-enabled, but the Linux virtio-blk driver does not know of this side effect and cache flushes remain disabled The bug is at the third step. If the guest does know about CONFIG_WCE, QEMU should ignore the WCE feature's state. The guest will control the cache mode solely using configuration space. This change makes Linux do flushes correctly, but Linux will keep SeaBIOS's writethrough mode. Hence, whenever the guest is reset, the cache mode of the disk should be reset to whatever was specified in the "-drive" option. With this change, the Linux virtio-blk driver finds that writeback caching is enabled, and tells the block layer to send cache flush commands appropriately. Reported-by: Rusty Russell <rusty@au1.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
That's why all my VMs were so fast lately. :) This changed in 1.6.0 by mistake in patch 29c4e2b5 (blockdev: Split up 'cache' option, 2013-07-18). Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
To read the last sector that is not aligned to sector boundary, current code for growable backends, since commit 893a8f62 "block: Produce zeros when protocols reading beyond end of file", drops the data and directly returns zeroes. That is incorrect. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Commit 3435f395 reduced the ifdeffery with this result for MinGW: exec.c: In function ‘qemu_ram_free’: exec.c:1239:17: warning: implicit declaration of function ‘munmap’ [-Wimplicit-function-declaration] exec.c:1239:17: warning: nested extern declaration of ‘munmap’ [-Wnested-externs] exec.c:1239: undefined reference to `munmap' Add some ifdeffery again to fix this. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Report from clang analyzer: clock.c:42:15: warning: Value stored to 'cpu' during its initialization is never read Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Richard Henderson 提交于
error: suggest parentheses around comparison in operand of ‘&’ [-Werror=parentheses] Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Tobias Markus 提交于
When in Long Mode, cpu_x86_seg_cache() logs "DS16" because the Default operation size bit (D/B bit) is not set for Long Mode Data Segments since there are only Data Segments in Long Mode and no explicit 16/32/64-bit Descriptors. This patch fixes this by checking the Long Mode Active bit of the hidden flags variable and logging "DS" if it is set. (I.e. in Long Mode all Data Segments are logged as "DS") Signed-off-by: NTobias Markus <tobias@markus-regensburg.de> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Michael Tokarev 提交于
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Michael Tokarev 提交于
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Markus Armbruster 提交于
Event qxl_render_blit_guest_primary_initialized is unused since commit c58c7b95, drop it. Commit 42e5b4c9 moved hw/ppc/xics.c to hw/intc/xics.c without updating the comment in trace-events. "scripts/cleanup-trace-events.pl trace-events | diff trace-events" is now clean again. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Debian busybox-static for alpha has a load address of 0x0000000120000000 which is mapped to 0x0000000020000000 for 32 bit hosts. qemu-alpha uses the TCG opcodes qemu_ld32, qemu_ld64, qemu_st32 and qemu_st64 which all raise the assertion (taddr == host_addr). Remove all assertions of this type because they are either wrong or unnecessary (when sizeof(tcg_target_ulong) >= sizeof(target_ulong)). Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Add a missing "function" and replace "and" by "any". BSD and Linux use the same documentation here, so fix both. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
tci.c is also a maintained part of the TCI implementation. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
The page dump writes a table with 3 abi_ulong values in each row. These values take 8 or 16 characters (depending on sizeof abi_ulong). Fix the table headings to be aligned with the table columns. old: start end size prot 0000000120000000-000000012021e000 000000000021e000 rwx 0000004000000000-0000004000002000 0000000000002000 --- 0000004000002000-0000004000802000 0000000000800000 rw- new: start end size prot 0000000120000000-000000012021e000 000000000021e000 rwx 0000004000000000-0000004000002000 0000000000002000 --- 0000004000002000-0000004000802000 0000000000800000 rw- Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Anthony PERARD 提交于
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com> Reviewd-By: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Richard W.M. Jones 提交于
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Michal Privoznik 提交于
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any previous detection if the macro has been already defined, e.g. by environment, or is just enabled by compiler by default. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NJan Vesely <jano.vesely@gmail.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 20 9月, 2013 4 次提交
-
-
由 Anthony Liguori 提交于
# By Gerd Hoffmann # Via Gerd Hoffmann * spice/spice.v74: qxl: compile only once qxl: simplify page dirtying qxl: simplify qxl_rom_size qxl: define qxl operating on 4k pages Message-id: 1379583534-7831-1-git-send-email-kraxel@redhat.com
-
由 Anthony Liguori 提交于
# By Hans de Goede (6) and Gerd Hoffmann (1) # Via Gerd Hoffmann * kraxel/usb.90: usb: Fix iovec memleak on combined-packet free usb: Also reset max_packet_size on ep_reset xhci: Fix memory leak on xhci_disable_ep xhci: Add xhci_epid_to_usbep helper function xhci: Init a transfers xhci, slotid and epid member on epctx alloc xhci: Fix number of streams allocated when using streams usb: remove old usb-host code Message-id: 1379583298-7524-1-git-send-email-kraxel@redhat.com
-
由 Anthony Liguori 提交于
# By Luiz Capitulino # Via Luiz Capitulino * luiz/queue/qmp: QMP: qmp-events.txt: alphabetical order fix and other minor changes QMP: Update qmp-spec.txt QMP: Update README file QMP: QMP/ -> docs/qmp/ QMP: fix qmp-commands.txt generation path QMP: add scripts/qmp Message-id: 1379509422-29115-1-git-send-email-lcapitulino@redhat.com
-
由 Max Reitz 提交于
Using s->snapshots_size instead of snapshots_size for the metadata overlap check in qcow2_write_snapshots leads to the detection of an overlap with the main qcow2 image header when deleting the last snapshot, since s->snapshots_size has not yet been updated and is therefore non-zero. However, the offset returned by qcow2_alloc_clusters will be zero since snapshots_size is zero. Therefore, an overlap is detected albeit no such will occur. This patch fixes this by replacing s->snapshots_size by snapshots_size when calling qcow2_pre_write_overlap_check. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-