Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 11 6月, 2014 7 次提交
    • L
      dump: eliminate DumpState.page_size ("guest's page size") · 2f859f80
      由 Laszlo Ersek 提交于 
      Use TARGET_PAGE_SIZE and ~TARGET_PAGE_MASK instead.

"DumpState.page_size" has type "size_t", whereas TARGET_PAGE_SIZE has type
"int". TARGET_PAGE_MASK is of type "int" and has negative value. The patch
affects the implicit type conversions as follows:

- create_header32() and create_header64(): assigned to "block_size", which
  has type "uint32_t". No change.

- get_next_page(): "block->target_start", "block->target_end" and "addr"
  have type "hwaddr" (uint64_t).

  Before the patch,
  - if "size_t" was "uint64_t", then no additional conversion was done as
    part of the usual arithmetic conversions,
  - If "size_t" was "uint32_t", then it was widened to uint64_t as part of
    the usual arithmetic conversions,
  for the remainder and addition operators.

  After the patch,
  - "~TARGET_PAGE_MASK" expands to  ~~((1 << TARGET_PAGE_BITS) - 1). It
    has type "int" and positive value (only least significant bits set).
    That's converted (widened) to "uint64_t" for the bit-ands. No visible
    change.
  - The same holds for the (addr + TARGET_PAGE_SIZE) addition.

- write_dump_pages():
  - TARGET_PAGE_SIZE passed as argument to a bunch of functions that all
    have prototypes. No change.

  - When incrementing "offset_data" (of type "off_t"): given that we never
    build for ILP32_OFF32 (see "-D_FILE_OFFSET_BITS=64" in configure),
    "off_t" is always "int64_t", and we only need to consider:
    - ILP32_OFFBIG: "size_t" is "uint32_t".
      - before: int64_t += uint32_t. Page size converted to int64_t for
        the addition.
      - after:  int64_t += int32_t. No change.
    - LP64_OFF64: "size_t" is "uint64_t".
      - before: int64_t += uint64_t. Offset converted to uint64_t for the
        addition, then the uint64_t result is converted to int64_t for
        storage.
      - after:  int64_t += int32_t. Same as the ILP32_OFFBIG/after case.
        No visible change.

  - (size_out < s->page_size) comparisons, and (size_out = s->page_size)
    assignment:
    - before: "size_out" is of type "size_t", no implicit conversion for
              either operator.
    - after: TARGET_PAGE_SIZE (of type "int" and positive value) is
             converted to "size_t" (for the relop because the latter is
             one of "uint32_t" and "uint64_t"). No visible change.

- dump_init():
  - DIV_ROUND_UP(DIV_ROUND_UP(s->max_mapnr, CHAR_BIT), s->page_size): The
    innermost "DumpState.max_mapnr" field has type uint64_t, which
    propagates through all implicit conversions at hand:

    #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))

    regardless of the page size macro argument's type. In the outer macro
    replacement, the page size is converted from uint32_t and int32_t
    alike to uint64_t.

  - (tmp * s->page_size) multiplication: "tmp" has size "uint64_t"; the
    RHS is converted to that type from uint32_t and int32_t just the same
    if it's not uint64_t to begin with.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
      2f859f80
    • L
      dump: eliminate DumpState.page_shift ("guest's page shift") · 22227f12
      由 Laszlo Ersek 提交于 
      Just use TARGET_PAGE_BITS.

"DumpState.page_shift" used to have type "uint32_t", while the replacement
TARGET_PAGE_BITS has type "int". Since "DumpState.page_shift" was only
used as bit shift counts in the paddr_to_pfn() and pfn_to_paddr() macros,
this is safe.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
      22227f12
    • L
      dump: simplify write_start_flat_header() · 92ba1401
      由 Laszlo Ersek 提交于 
      Currently, the function
- defines and populates an auto variable of type MakedumpfileHeader
- allocates and zeroes a buffer of size MAX_SIZE_MDF_HEADER (4096)
- copies the former into the latter (covering an initial portion of the
  latter)

Fill in the MakedumpfileHeader structure in its final place (the alignment
is OK because the structure lives at the address returned by g_malloc0()).
Approximately-suggested-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
      92ba1401
    • L
      dump: fill in the flat header signature more pleasingly to the eye · ae3f88f6
      由 Laszlo Ersek 提交于 
      The "mh.signature" array field has size 16, and is zeroed by the preceding
memset(). MAKEDUMPFILE_SIGNATURE expands to a string literal with string
length 12 (size 13). There's no need to measure the length of
MAKEDUMPFILE_SIGNATURE at runtime, nor for the extra zero-filling of
"mh.signature" with strncpy().

Use memcpy() with MIN(sizeof, sizeof) for robustness (which is an integer
constant expression, evaluable at compile time.)
Approximately-suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
      ae3f88f6
    • P
      Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-06-10' into staging · b780bf8e
      由 Peter Maydell 提交于 
      trivial patches for 2014-06-10

# gpg: Signature made Tue 10 Jun 2014 17:07:19 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-06-10: (25 commits)
  virtio.c: fix error message
  hw: vmware_vga: don't return cursorx when the driver asks for cursory register
  migration: Plug memory leak in migrate-set-cache-size command
  libcacard: Clean up dead stores before g_free()
  libcacard: Drop superfluous conditionals around g_free()
  cpu/x86: correctly set errors in x86_cpu_parse_featurestr
  smbios: use g_free directly on NULL pointers
  vdi: remove double conversion
  apb: Fix compiler warnings (large constants)
  hw/net/ne2000-isa: Register vmstate struct
  target-microblaze: Delete unused sign_extend() function
  hw/misc/milkymist-softusb: Remove unused softusb_{read, write}_pmem()
  target-i386/translate.c: Remove unused tcg_gen_lshift()
  hw/isa/pc87312: Remove unused function is_parallel_epp()
  hw/intc/openpic: Remove unused function IRQ_testbit()
  hw/dma/xilinx_axidma: Remove unused stream_halted() function
  util/qemu-sockets.c: Avoid unused variable warnings
  hw/sd/sd.c: Drop unused sd_acmd_type[] array
  hw/i386/pc.c: Remove unused parallel_io and parallel_irq variables
  slirp: Remove unused zero_ethaddr[] variable
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
      b780bf8e
    • M
      virtio.c: fix error message · 1a285899
      由 Michael Tokarev 提交于 
      Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
      1a285899
    • N
      hw: vmware_vga: don't return cursorx when the driver asks for cursory register · e2bb4ae7
      由 Nicolas Owens 提交于 
      hello qemu-*@nongnu.org, this is my first contribution. apologies if
something is incorrect.

this patch fixes vmware_vga.c so that it actually returns the cursory
register when asked for, instead of cursorx.
Signed-off-by: NNicolas Owens <mischief@offblast.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
      e2bb4ae7
  3. 10 6月, 2014 33 次提交