- 21 2月, 2009 6 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6635 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
pthread_cond_timedwait is allowed to both consume the signal and return with the value indicating the timeout, hence predicate should always be (re)checked before taking an action git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6634 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
Avoid repeated creation/initalization/destruction of attr and calls to getpid git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6633 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
Broadcast was used so that the I/O threads would wakeup, reset their ts values and all but one go to sleep, in other words an optimization to prevent threads from exiting in presence of continuing I/O activity. Spurious wakeups make the looping around cond_timedwait with ever reinitialized ts potentially unsafe and as such ts in no longer reinitilized inside the loop, hence switch to signal is warranted and this benefits of this particlaur optimization are lost. (It's worth noting that timed variants of pthread calls use realtime clock by default, and therefore can hang "forever" should the host time be changed. Unfortunatelly not all host systems QEMU runs on support CLOCK_MONOTONIC and/or pthread_condattr_setclock with this value) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6632 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
This can happen due to spurious wakeups git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6631 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6630 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 20 2月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6629 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 19 2月, 2009 2 次提交
-
-
由 aurel32 提交于
KVM uses cpu_physical_memory_rw() to access the I/O devices. When a read or write with a length of 8-byte is requested, it is split into 2 4-byte accesses. This has been broken in revision 5849. After this revision, only the first 4 bytes are actually read/write to the device, as the target address is changed, so on the next iteration of the loop the next 4 bytes are actually read/written elsewhere (in the RAM for the graphic card). This patch fixes screen corruption (and most probably data corruption) with FreeBSD/amd64. Bug #2556746 in KVM bugzilla. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6628 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6627 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 16 2月, 2009 7 次提交
-
-
由 aliguori 提交于
No need to check for failing qemu_malloc anymore. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6626 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6625 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
For STS register bit are cleared by writing 1 into it. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6624 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6623 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
cirrus_do_copy() in hw/cirrus_vga.c seems to make some incorrect assumptions about video memory layout. It tries to convert addresses to coordinates assuming that one row of data is (width * depth) bytes long. The correct way seems to be to use the pitch fields in the CirrusVGAState structure instead. Without this patch, I get lots of screen corruption when I try to drag a window under X as it's passing the wrong coordinates to the display surface for the copy. With this patch I can drag a window with no screen corruption. Signed-off-by: NBrian Kress <kressb@moose.net> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6622 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Change structure associated with a display from VncState to a new structure VncDisplay. Remove client specific fields from VncDisplay. Remove display specific fields from VncState. Maintain a linked list of VncStates per VncDisplay structure, update as necessary. When updates/resizes/copies come in from the hardware, dispatch to all clients. Signed-off-by: NBrian Kress <kressb@moose.net> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6621 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6620 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 14 2月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6619 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 13 2月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6618 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 12 2月, 2009 7 次提交
-
-
由 aliguori 提交于
Incrementing the array index was missed in the previous series which causes us to not store all the values. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6617 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
[ As requested, broken out of the monitor rework series. ] Avoid a segfault when the user issues 'change vnc' without having vnc enabled on startup. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6616 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
For qemu_realloc with size == 0 a result of NULL is perfectly fine Signed-off-by: NKevin Wolf <kwolf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6615 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
Since we don't generate any "old op" anymore, the old_op_count is unneeded. Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6614 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6613 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6612 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6611 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 11 2月, 2009 15 次提交
-
-
由 aliguori 提交于
Add monitor command to hot-add PCI devices (nic and storage). Syntax is: pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params It returns the domain, bus and slot for the newly added device on success. It is possible to attach a disk to a device after PCI initialization via the drive_add command. If so, a manual scan of the SCSI bus on the guest is necessary. Save QEMUMachine necessary for drive_init. Add monitor command to hot-remove devices, remove device data on _EJ0 notification. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This code parses full PCI device addresses. It then rejects domains other than zero, because these are not supported in QEMU. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6609 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Enable the corresponding bit on the PCIST region and trigger the SCI and handle the _EJ0 notifications. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6608 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
ACPI GPE support, used by PCI (and CPU) hotplug. From: Glauber Costa <gcosta@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6607 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
If the io port is unassigned, the previous private pointer is meaningless. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6606 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6605 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Otherwise the PCI size for such regions can be calculated erroneously. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6604 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Unregister the pci device, unassign its IO and memory regions, and free associated data. Add a callback so drivers can free device state. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6603 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6602 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
So drivers can clear their mem io table entries on exit back to unassigned state. Also make the io mem index allocation dynamic. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6601 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6600 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Export net/drive add/remove functions for device hotplug usage. Return the table index on add. Return failure instead of exiting if limit has been reached on drive_add. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6599 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Device hotplug will use that structure from a separate file. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6598 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Record PCIDev on the BlockDriverState structure to locate for release on hot-removal. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6597 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
To be used by hot-remove. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6596 c046a42c-6fe2-441c-8c8c-71466251a162
-