Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-6-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-5-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The first argument should be a PCI address, which pci-addr=auto isn't.
Doesn't really matter, as drive_add ignores its first argument when
its second argument has if=none.  Clean it up anyway.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-4-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

QMP accepts both single and double quotes.  This is the only test
using double quotes.  They need to be quoted in C strings.  Replace
them by single quotes.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-3-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Each of qdev-monitor-test and blockdev-test has just one test case,
and both are about drive_del.

[Extended copyright from 2013 to 2013-2014 as requested by Eric Blake.
--Stefan]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-2-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The "corrupt" entry in the format-specific information section should be
"true".
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-4-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Just like lazy-refcounts, this field will be present iff the qcow2
compat level is 1.1 (or probably any future revision).

As expected, this breaks some tests due to the new field present in
qemu-img info output; so fix their output accordingly.
Suggested-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.

Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

IDs have long spread beyond QemuOpts: not everything with an ID
necessarily goes through QemuOpts.  Commit 9aebf3b8 is about such a
case: block layer names are meant to be well-formed IDs, but some of
them don't go through QemuOpts, and thus weren't checked.  The commit
fixed that the straightforward way: rename the internal QemuOpts
helper id_wellformed() to qemu_opts_id_wellformed() and give it
external linkage.

Instead of using it directly in block.c, the commit adds wrapper
bdrv_is_valid_name(), probably to hide the connection to QemuOpts.

Go one logical step further: emancipate IDs from QemuOpts.  Rename the
function back to id_wellformed(), and put it in another file.  While
there, clean up its value to bool.  Peel off the bdrv_is_valid_name()
wrapper.

[Replaced stray return 0 with return false to match bool returns used
elsewhere in id_wellformed().
--Stefan]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch implements the backend for the Q35 board
for us to be able to pick up and use drives defined
by the -cdrom, -hda, or -drive if=ide shorthand options.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-7-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the Q35 board types are to begin recognizing
and decoding syntactic sugar for drive/device
declarations, then workarounds found within
the qtests suite need to be adjusted to prevent
any test failures after the fix.

bios-tables-test improperly uses this cli:
-drive file=etc,id=hd -device ide-hd,drive=hd

Which will create a drive and device due to
the lack of specifying if=none. Then, it will
attempt to create a second device and fail.

This patch corrects this test to always use
the full, non-sugared -device/-drive syntax
for both PC and Q35.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-6-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.

This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.

Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.

This property only overrides the mapping for drives matching
the block_default_type interface.

This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.

Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.

Examples:

Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.

-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.

These are invalid for AHCI. They now become, under Q35 only:

-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.

The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.

Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.

Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.

This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.

A warning in these cases is considered appropriate.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.

Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.

Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.

Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.

In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.

This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586

[Resolved conflict with commit 5abbf0ee
("block: Catch simultaneous usage of options and their aliases").  Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: NJun Li <junmuzi@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes the bug introduced by commit c6ac36e1 (vmdk: Optimize cluster
allocation).

$ ~/build/master/qemu-io /stor/vm/arch.vmdk -c 'write 2G 1k'
write failed: Invalid argument
Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1411437381-11234-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

$ ./qemu-img create -f qcow2 overlay \
    -b 'json: { "file.driver":"ssh",
                "file.host":"localhost",
                "file.host_key_check":"no" }'
qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed.
Aborted

A similar crash also happens if the file.host field is omitted.

https://bugzilla.redhat.com/show_bug.cgi?id=1147343

Bug found and reported by Jun Li.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The while loop variabal is "bs1",
but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name.
Broken in commit a89d89d3, v1.7.0.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

input monitor patches: fix send-key release ordering
and new input-send-event command

# gpg: Signature made Thu 02 Oct 2014 09:10:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-20141002-1:
  add input-send-event command
  input: fix send-key monitor command release event ordering
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pixman: fix qemu_default_pixman_format (32bpp non-native endian)

# gpg: Signature made Thu 02 Oct 2014 08:47:20 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-console-20141002-1:
  pixman: fix qemu_default_pixman_format (32bpp non-native endian)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: cleanups, prepare for endianness switching

# gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20141002-1:
  vga: Add endian to vmstate
  vga: Make fb endian a common state variable
  vga: Rename vga_template.h to vga-helpers.h
  vga: Remove some "should be done in BIOS" comments
  cirrus: Remove non-32bpp cursor drawing
  vga: Simplify vga_draw_blank() a bit
  vga: Remove rgb_to_pixel indirection
  vga: Separate LE and BE conversion functions
  vga: Remove remainder of old conversion cruft
  vga: Start cutting out non-32bpp conversion support
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Which allows specification of absolute/relative,
up/down and console parameters.

Suggested by Gerd Hoffman.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 2e377f17 changed the ordering
of the release events as side effect.  Some guests are not happy with
that and don't recognise ctrl-alt-del any more.  This patch restores
the old last-pressed first-released behavior.

Cc: Amos Kong <akong@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental.  It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi.  This
is a pretty important feature.  Almost all the work here
was done by Fam Zheng.

I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.

This pull request is using the new subkey 4E6B09D7.

# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (39 commits)
  block/iscsi: handle failure on malloc of the allocationmap
  util: introduce bitmap_try_new
  virtio-scsi: Handle TMF request cancellation asynchronously
  scsi: Introduce scsi_req_cancel_async
  scsi: Introduce scsi_req_cancel_complete
  scsi: Drop SCSIReqOps.cancel_io
  scsi: Unify request unref in scsi_req_cancel
  scsi-generic: Handle canceled request in scsi_command_complete
  scsi: Drop scsi_req_abort
  virtio-scsi: Process ".iothread" property
  virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
  virtio-scsi: Batched prepare for cmd reqs
  virtio-scsi: Two stages processing of cmd request
  virtio-scsi: Add migration state notifier for dataplane code
  virtio-scsi: Hook up with dataplane
  virtio-scsi-dataplane: Code to run virtio-scsi on iothread
  virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
  virtio-scsi: Add 'iothread' property to virtio-scsi
  virtio: add a wrapper for virtio-backend initialization
  virtio-9p: fix virtio-9p child refcount in transports
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ac97: register reset via qom

# gpg: Signature made Tue 30 Sep 2014 12:32:29 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20140930-1:
  ac97: register reset via qom
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc, virtio, misc bugfixes

A bunch of bugfixes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vl: Adjust the place of calling mlockall to speedup VM's startup
  pc-dimm: Don't check dimm->node when there is non-NUMA config
  pci-hotplug-old: avoid losing error message
  Revert "virtio-pci: fix migration for pci bus master"
  loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Changes by kraxel:
 * Remove bochs dispi interface changes.  We'll do that in
   a different way to make sure we don't conflict with
   possible future bochs dispi interface changes.
 * keep live migration bits.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

And initialize it based on target endian
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

It's no longer a template, we only instanciate the file once.

Keep it a #included file so the functions remain static.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Not all platforms have a VGA BIOS, powerpc typically relies on
using the DISPI interface to initialize the card.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

We only draw cursor on non-shared surfaces (so it seems...) and
these are always 32bpp
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

The test for surface_bits_per_pixel() isn't necessary anymore,
the 8bpp case never happens.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

We always use rgb_to_pixel32 nowadays.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Provide different functions for converting from an LE vs a BE
framebuffer. We cannot rely on the simple cases always being
shared surfaces since cirrus will need to always shadow for
cursor emulation, so we need the full set of functions to
be able to later handle runtime switching.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

All the macros used to generate different versions of vga_template.h
are now unnecessary, take them all out and remove the _32 suffix from
most functions.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Nowadays, we either share a surface with the host, or we create
a 32bpp ARGB console surface.

So we only need to draw/convert to 32bpp, enabling us to remove
all but one instance of vga_template.h inclusion (to be further
cleaned up), rgb_to_pixel_* etc...
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>