- 23 4月, 2009 2 次提交
-
-
由 aliguori 提交于
If fault happened during event delivery exit_int_info should contain valid info about the event on vm exit. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7230 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
this patch adds a buffer_alignment field to BlockDriverState and implements a qemu_blockalign function that uses that field to allocate a memory aligned buffer to be used by the block driver. buffer_alignment is initialized to 512 but each block driver can set a different value (at the moment none of them do). This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to use qemu_blockalign instead of qemu_memalign. There is only one place left that still uses qemu_memalign to allocate buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw because it is not possible to get the BlockDriverState from that function. However I think it is not important because posix-aio-compat already deals with driver specific code so it is supposed to know its own needs. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7229 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 22 4月, 2009 31 次提交
-
-
由 aliguori 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7228 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7227 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This adds domain building support for paravirtual domains to qemu. This allows booting xen guests directly with qemu, without Xend and the management stack. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch makes qemu create backend and frontend device entries in xenstore for devices configured on the command line. It will use qdisk and qnic backend names, so the qemu internal backends will be used. Disks can be created using -drive if=xen,file=... Nics can be created using -net nic,macaddr=... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch adds a network interface backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qnet" as backend name in xenstore so it doesn't interfere with the netback backend (aka "vnif"). The network backend is hooked into the corrosponding qemu vlan, i.e. vif 0 is hooked into vlan 0. To make the packages actually arrive somewhere you additionally have to link the vlan to the outside world using the usual qemu command line options such as "-net tap,...". Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch adds a block device backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qdisk" as backend name in xenstore so it doesn't interfere with the other existing backends (blkback aka "vbd" and tapdisk aka "tap"). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. It also has been changed to compile with xen headers older than release 3.3 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch adds a xenconsole backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch adds infrastructure for xen backend drivers living in qemu, so drivers don't need to implement common stuff on their own. It's mostly xenbus management stuff: some functions to access xentore, setting up xenstore watches, callbacks on device discovery and state changes, handle event channel, ... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7218 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
From: Kevin Wolf <kwolf@redhat.com> All L1 and L2 entries must point at the start of a cluster. If there is some offset into the cluster, the entry is corrupted. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7217 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This is purely cosmetical changes to make the code easier to read. Move L2 table processing from a deeply nested block to its own function, add some comments. Patch v2: Fix misplaced bracket causing false positives Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7216 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
From: Kevin Wolf <kwolf@redhat.com> Now that block drivers can provide check functions, expose them through qemu-img. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
From: Kevin Wolf <kwolf@redhat.com> Introduce a new bdrv_check function pointer for block drivers. Modify qcow2 to return an error status in check_refcounts(), so it can implement bdrv_check. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7214 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
From: Kevin Wolf <kwolf@redhat.com> This code is currently only compiled when DEBUG_ALLOC is defined, so you usually don't see compiler warnings on it. This patch series wants to enable the code, so fix the format string warnings first. While we're at it, let's print error messages to stderr. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7213 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
uses the QEMU firmware configuration interfacce to send the NUMA topology to the BIOS, which has to setup the tables. Only one firmware configuration channel is used. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
adds an "info numa" command to the monitor to output the current topology. Since NUMA is advertised via static ACPI tables, no changes are possible during runtime. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
adds a -numa command line parameter and sets a QEMU global array with the memory sizes. The CPU-to-node assignemnt is written into the CPUState. If no specific values for memory and CPUs are given, all resources will be split equally across all nodes. This code currently support only up to 64 virtual CPUs. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
Noticed by Mark Karpeles. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7209 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
The slirp stack is full of global variables which prevents instantiating it more than once. Catch this during net_slirp_init to prevent more harm later on. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Queue packets that are send during an ongoing packet delivery. This ensures that packets will always arrive in their logical order at each client of a VLAN. Currently, slirp generates such immediate relies, and e.g. packet-sniffing clients on the same VLAN may get confused. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
There is nothing x86-specific in host_net_add/remove, so allow them for all targets. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Fix the documentation of the host_net_add monitor command and allow the user to pass no options at all. Moreover, inform the user on the monitor terminal if a request failed. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch is derived from Tristan Gingold's patch. It adds a new VLAN client type that writes all traffic on the VLAN it is attached to into a pcap file. Such a file can then be analyzed offline with Wireshark or tcpdump. Besides rebasing and some minor cleanups, the major differences to the original version are: - support for enabling/disabling via the monitor (host_net_add/remove) - no special ordering of VLAN client list, qemu_send_packet now takes care of properly ordered packets - 64k default capturing limit (I hate tcpdump's default) Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7199 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This adds proper handling of the ciaddr field as well as the "Requested IP Address" option to slirp's DHCP server. If the client requests an invalid or used IP, a NAK reply is sent, if it requests a specific but valid IP, this is now respected. NAK'ing invalid IPs is specifically useful when changing the slirp IP range via '-net user,ip=...' while the client saved its previously used address and tries to reacquire it. Now this will be NAK'ed and the client will start a new discovery round. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This aims at helping the user to find typos or other mistakes in parameter lists passed for VLAN client initialization. The existing parsing infrastructure does not allow a leaner approach, but this is better than nothing IMHO. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
In case no symbolic name is provided when requesting VLAN connection via listening TCP socket ('-net socket,listen=...'), qemu crashes. This fixes the cause. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Make sure that we do not delete guest NICs via host_net_remove. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 21 4月, 2009 4 次提交
-
-
由 pbrook 提交于
Also fixes a register corruption bug in do_sigreturn. When "returning" from sigreturn we are actually restoring the virtual cpu state from the signal frame. This is actually surprisingly hard to observe in practice. Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives, so the effect is a spurious syscall success and the introduction of a subtle race condition. On x86/arm a syscall modifies a single word sized register, so do_sigreturn can just return that value. On MIPS a syscall clobbers multiple registers, so we need additional smarts. My solution is to invent a magic errno value that means "don't touch CPU state". git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7193 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7192 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7191 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 19 4月, 2009 3 次提交
-
-
由 blueswir1 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7190 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
It makes usb keyboard available for sh4/r2d system emulation. The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with OHCI driver. OHCI driver accesses it with SH4 physical memory address, and SM501 accesses it with SM501 local address. 'localmem_base' holds where the SM501 local memory is mapped into SH4 physical address space. - Memory access functions modified to adjust address with 'localmem_base'. The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*(). - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent implementation. For other source files, it does, - introduces usb_ohci_init_sm501(). - adds irq argument for SM501 initialization, to emulate USB interrupts. Signed-off-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
-