Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Support escaping the escape character, and make more robust (don't die
for '', handle ' without matching '.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.

This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.

This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.

When reset over QOM hierarchy is implemented, reset callback
should be removed.

v2:
  - leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
    init is moved in cpu.c
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.

This patch:
 - moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
 - stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
 - uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP

patch is based on Jan Kiszka's proposal:
    http://thread.gmane.org/gmane.comp.emulators.qemu/100806Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the smartcard configure check passes, add '-I\$(SRC_PATH)/libcacard'
to QEMU_INCLUDES, not QEMU_CFLAGS. Otherwise the unexpanded SRC_PATH
will cause a warning in every following configure test.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix compile warning in the utimensat/futimens test ("implicit
declaration of function 'utimensat'", ditto futimens) by
adding a missing include.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix compile warnings in the VDE library probe ("passing argument 1 of
'vde_open_real' discards 'const' qualifier from pointer target type",
ditto argument 2).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix compile warning (variable 'png_ptr' set but not used) in the
PNG detection test code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The old test code raises two compiler warnings which are errors since
commit 417c9d72.

These errors could result in compilations with compiler flag
-march486 (so all nice features of newer processors got lost).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The distinction between QEMU_CFLAGS and CFLAGS is that the
former is for flags without which QEMU can't compile, whereas
the latter is for flags like "-g -O2" which the user can
safely override. "-march=i486" is in the former category, and
so belongs in QEMU_CFLAGS.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

"+=" does not work with dash and other simple /bin/sh implementations.

The new code prepends the flag while the old code either did not work
(it continued after an error message which typically was not read) or
appended the flag. That difference should not matter here.
Reported-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Since commit 417c9d72 all configure tests
normally run with -Werror. Some of these tests now fail because they
raised a compiler warning.

This patch fixes support for capabilities.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Since commit 417c9d72,
all configure tests normally run with -Werror.

Some of these tests now fail because they raised a compiler warning.

Here a build breakage for ALSA (configure --audio-drv-list=alsa) is fixed.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't run configure tests with -Werror in the compiler flags. The idea
of -Werror is that it makes problems very obvious to developers, so
they get fixed quickly. However, when running configure tests, failures
due to -Werror are far from obvious -- they simply result in the test
quietly failing when it should have passed. Not using -Werror is in
line with recommended practice in the Autoconf world.

This commit is essentially backing out the changes in commit 417c9d72.
Instead we fix the problem that commit was trying to address in a
different way: we add -Werror only for the test of the nss headers,
with a comment that this is specifically intended to detect a bug
in some releases of nss.

We also have to clean up a bug in the smartcard test where it was
trying to include smartcard_cflags in the test compile flags: this
would always result in a failure with -Werror, because they include
an escaped "$(SRC_PATH)" which is only valid when used in the final
makefile.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Split the configure test that checks for valgrind into two, one
part checking whether we have the gcc pragma to disable unused-but-set
variables, and the other part checking for the existence of valgrind.h.
The first of these has to be compiled with -Werror and the second
does not and shouldn't generate any warnings.

This (a) allows us to enable "make errors in configure tests be
build failures" and (b) enables use of valgrind on systems with
a gcc which doesn't know about -Wunused-but-set-varibale, like
Debian squeeze.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* mst/tags/for_anthony:
  msi/msix: added API to set MSI message address and data
  pci: Add INTx routing notifier
  pci: Add pci_device_route_intx_to_irq
  pci: Unregister BARs before device exit
  pci: convert PCIUnregisterFunc to void
  msix: Switch msix_uninit to return void
  msix: Allow full specification of MSIX layout
  msix: Split PBA into it's own MemoryRegion
  msix: Note endian TODO item
  msix: Move msix_mmio_read
  virtio: Convert to msix_init_exclusive_bar() interface
  ivshmem: Convert to msix_init_exclusive_bar() interface
  msix: Add simple BAR allocation MSIX setup functions
  msix: fix PCIDevice naming inconsistency
  msix: drop unused msix_bar_size, require valid bar_size

* bonzini/nbd-next:
  qemu-nbd: add --cache and --aio options
  qemu-nbd: reorganize help message

* bonzini/scsi-next: (32 commits)
  virtio-scsi: enable MSI-X support
  virtio-scsi: add ioeventfd support
  virtio-scsi: report parameter change events
  virtio-scsi: do not report dropped events after reset
  virtio-scsi: Report missed events
  virtio-scsi: Implement hotplug support for virtio-scsi
  scsi: report parameter changes to HBA drivers
  scsi-disk: report resized disk via sense codes
  scsi: establish precedence levels for unit attention
  scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus
  scsi: add tracepoint for scsi_req_cancel
  scsi-disk: removable hard disks support load/eject
  scsi-disk: Fail medium writes with proper sense for readonly LUNs
  scsi-disk: improve the lba-out-of-range tests for read/write/verify
  scsi-disk: rd/wr/vr-protect !=0 is an error
  scsi-disk: support toggling the write cache
  scsi-disk: parse MODE SELECT commands and parameters
  scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR
  scsi-disk: adjust offsets in MODE SENSE by 2
  scsi-disk: support emulated TO_DEV requests
  ...

* commit '6c779f22':
  Change ram_save_block to return -1 if there are no more changes
  ram: save_live_setup() we don't need to synchronize the dirty bitmap.
  ram: iterate phase
  ram: save_live_complete() only do one loop
  ram: save_live_setup() don't need to sent pages
  savevm: split save_live into stage2 and stage3
  savevm: split save_live_setup from save_live_state
  savevm: introduce is_active method
  savevm: Refactor cancel operation in its own operation
  savevm: remove SaveLiveStateHandler
  savevm: remove SaveSetParamsHandler
  savevm: Live migration handlers register the struct directly
  savevm: Use a struct to pass all handlers

Merge master and pci branch, resolve build breakage in hw/esp.c
introduced by f90c2bcd.

Conflicts:
	hw/esp.c

According to the Intel manual
"Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3", "3.4.4 Segment Loading Instructions in IA-32e Mode":

"When in compatibility mode, FS and GS overrides operate as defined by
32-bit mode behavior regardless of the value loaded into the upper 32
linear-address bits of the hidden descriptor register base field.
Compatibility mode ignores the upper 32 bits when calculating an effective address."

However, the code misses the 64-bit mode case, where an instruction with
address and segment size override would be translated incorrectly. For example,
inc dword ptr gs:260h[ebx*4] gets incorrectly translated to:

(uint32_t)(gs.base + ebx * 4 + 0x260)
instead of
gs.base + (uint32_t)(ebx * 4 + 0x260)
Signed-off-by: NVitaly Chipounov <vitaly.chipounov@epfl.ch>
Reviewed-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Past contributions since 2012-01-13 were only made by Red Hat people,
so they are already available under GPLv2+.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch will fix the following linking failed:

  LINK  qemu-ga
gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory
make: *** [qemu-ga] Error 1

Commit cdc976b0 changes the
dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o",
which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when
building qemu-ga.

In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o"
which was not equal to "qga/../qapi-generated/qga-qapi-types" in the
Makefile world. So "No such file" error happened when qemu-ga was linking.

The easy approach to fix is to change the target name to
"qga/../qapi-generated/qga-qapi-types.o", but it is weird.

So, in order to solve it more graciously, I move those temporary
files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated,
this makes dependencies more clearer.
Signed-off-by: NDunrong Huang <riegamaths@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

System headers (e.g. gutils.h) may define 'inline', #undefine it
before #defining.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It's silly and non-conforming to standards to return void,
don't do it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Drop a duplicate definition of the 'disabled' property from
the escc qdev property list: this redefinition is currently
effectively ignored but will become an error. (The duplication
was inadvertently introduced in 2009 in commit ec02f7de.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

After commit dcff25f2, Dependency file
are taken from the directories that have a Makefile.objs file.  This is
not enough, since files can be included from other directories.
So, pick them from directories that have an object file in them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

No reason to leave them out, and it will ensure that the dependencies
are picked up.  Later we can perhaps move the files to another
directory to avoid ../ usage.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.

To reproduce the bug, run:

 $ make check  # succeeds
 $ echo B0RKED > hw/mc146818rtc_regs.h
 $ make check  # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The qemu_chr_new() function doesn't set errno on failure, so
don't print strerror(errno) on the error handling path when
dealing with the -serial, -parallel and -virtioconsole arguments.
This avoids nonsensical error messages like:
  $ ./arm-softmmu/qemu-system-arm -serial wombat
  qemu: could not open serial device 'wombat': Success

We also rephrase the message slightly to make it a little clearer
that we're expecting the name of a QEMU chr backend rather than
a host or guest serial/parallel/etc device.
Reported-by: NChristian Müller <christian.mueller@heig-vd.ch>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Quote from ISA, 2.1:

For most Xtensa instructions, bit numbering is irrelevant; only the BBC
and BBS instructions assign bit numbers to values on which the processor
operates. The BBC/BBS instructions use big-endian bit ordering (0 is the
most-significant bit) on a big-endian processor configuration.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add testcases for OpenRISC.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add QEMU OpenRISC linux user support.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add OpenRISC linux syscall, signal and termbits.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add OpenRISC gdb stub support.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add OpenRISC system instructions.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add a IIS dummy board.
Signed-off-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>