The POWER7 emulation is missing the Processor Identification Register,
mandatory in recent POWER CPUs, that is required for SMP on at least
some operating systems (e.g. FreeBSD) to function properly. This patch
copies the existing PIR code from the other CPUs that implement it.
Signed-off-by: NNathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The sPAPR PCI code defines a PCI device "spapr-pci-host-bridge-pci" which
is never used.  This came over from the earlier bridge driver we used as
a template.  Some other bridges appear on their own PCI bus as a device,
but that is not true of pSeries bridges, which are pure host to PCI with
no visible presence on the PCI side.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The 'bars' constant array was used in experimental device allocation code
which is no longer necessary now that we always run the SLOF firmware.
This patch removes the now redundant variable.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch updates the SLOF firmware image used on the pseries
machine.  The new version adds support for Cirrus VGA and virtfs, as
well as including a number of bugfixes.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

These instructions for loading and storing byte-swapped 64-bit values have
been introduced in PowerISA 2.06.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

For the pseries machine, TCE (IOMMU) tables can either be directly
malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed
from a KVM ioctl.  The latter option is used when available, because it
allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated.
However, even when KVM is persent, TCE acceleration is not always possible.
Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out
of contiguous memory to allocate the new table.  In this case we need to
fall back on the malloc()ed table.

When a device is removed, and we need to remove the TCE table, we need to
either munmap() or free() the table as appropriate for how it was
allocated.  The code is supposed to do that, but we buggily fail to
initialize the tcet->fd variable in the malloc() case, which is used as a
flag to determine which is the right choice.

This patch fixes the bug, and cleans up error messages relating to this
path while we're at it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

spin_rw_ops is only used in hw/ppce500_spin.c.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When trying to run a ppc405 guest, it segfaults quite quickly, trying to
access timers that weren't initialized. Initialize them properly instead.
Reported-by: NAndreas Faerber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

All architectures work the same way, and all check for sas_ss_flags ==
0. The powerpc lines are wrong, and do the check the other way round
(it's a qemu internal check, which is done wrong only for this
architecture, it's more a typo than a bug). It's NOT ppc specific,
it's POSIX standard (sigaltstack) and qemu internal.

I have a test source that I will send in a follow-up (it's longer than
I would have wished, I'm sure that a better test case can be written
if needed)
Signed-off-by: NAlex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Commit 9b9a970a
(target-lm32/microblaze: Typedef struct CPU{MB,LM32}State)
introduced necessary typedefs for cpu_mmu_index() and mmu.h
respectively.

On some GCC versions this leads to "error: redefinition of typedef".

Drop the original typedef to hopefully fix the build.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* afaerber/qom-cpu.v5: (43 commits)
  qom: Introduce CPU class
  Rename CPUState -> CPUArchState
  xtensa hw/: Don't use CPUState
  sparc hw/: Don't use CPUState
  sh4 hw/: Don't use CPUState
  s390x hw/: Don't use CPUState
  ppc hw/: Don't use CPUState
  mips hw/: Don't use CPUState
  microblaze hw/: Don't use CPUState
  m68k hw/: Don't use CPUState
  lm32 hw/: Don't use CPUState
  i386 hw/: Don't use CPUState
  cris hw/: Don't use CPUState
  arm hw/: Don't use CPUState
  alpha hw/: Don't use CPUState
  xtensa-semi: Don't use CPUState
  m68k-semi: Don't use CPUState
  arm-semi: Don't use CPUState
  target-xtensa: Don't overuse CPUState
  target-unicore32: Don't overuse CPUState
  ...

This fixes memory reads and writes which exceeded the upper limit
of allocated memory vd->guest.ds->data and vd->server->data.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The threaded VNC servers messed up with QEMU fd handlers without
any kind of locking, and that can cause some nasty race conditions.

Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(),
which will wait for the current job queue to finish, can be called with
the iothread lock held.

Instead, we now store the data in a temporary buffer, and use a bottom
half to notify the main thread that new data is available.

vnc_[un]lock_ouput() is still needed to access VncState members like
abort, csock or jobs_buffer.
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reintroduce CPUState as QOM object: It's abstract and derived directly
from TYPE_OBJECT for compatibility with the user emulators.
The identifier CPUState avoids conflicts between CPU() and the struct.

Introduce $(qom-twice-y) to build it separately for system and for user
emulators.

Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/xtensa_*.[hc]; do
    sed -i "s/CPUState/CPUXtensaState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/sun4m.c hw/sun4u.c hw/grlib.h hw/leon3.c; do
    sed -i "s/CPUState/CPUSPARCState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/sh.h hw/shix.c hw/r2d.c; do
    sed -i "s/CPUState/CPUSH4State/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/s390-*.[hc]; do
    sed -i "s/CPUState/CPUS390XState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do
    sed -i "s/CPUState/CPUPPCState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/mips_*.[hc]; do
    sed -i "s/CPUState/CPUMIPSState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/microblaze_*.[hc] hw/petalogix_ml605_mmu.c hw/petalogix_s3adsp1800_mmu.c; do
    sed -i "s/CPUState/CPUMBState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/an5206.c hw/dummy_m68k.c hw/mcf.h hw/mcf5206.c hw/mcf5208.c hw/mcf_intc.c; do
    sed -i "s/CPUState/CPUM68KState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/lm32_boards.c hw/milkymist.c; do
    sed -i "s/CPUState/CPULM32State/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do
    sed -i "s/CPUState/CPUX86State/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/cris-boot.[hc] hw/cris_pic_cpu.c hw/axis_dev88.c hw/etraxfs.h hw/etraxfs_ser.c; do
    sed -i "s/CPUState/CPUCRISState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/arm-misc.h hw/arm_boot.c hw/arm_pic.c hw/armv7m.c hw/exynos4210.h hw/highbank.c hw/integratorcp.c hw/musicpal.c hw/omap.h hw/pxa.h hw/pxa2xx_gpio.c hw/pxa2xx_pic.c hw/realview.c hw/strongarm.h hw/versatilepb.c hw/vexpress.c  hw/xilinx_zynq.c ; do
    sed -i "s/CPUState/CPUARMState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in hw/alpha_*.[hc]; do
    sed -i "s/CPUState/CPUAlphaState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUXtensaState/g" xtensa-semi.c
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUM68KState/g" m68k-semi.c
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUARMState/g" arm-semi.c
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc]
  sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUUniCore32State/g" target-unicore32/*.[hc]
  sed -i "s/#define CPUUniCore32State/#define CPUState/" target-unicore32/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc]
  sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc]
  sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc]
  sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc]
  sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc]
  sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUMBState/g" target-microblaze/*.[hc]
  sed -i "s/#define CPUMBState/#define CPUState/" target-microblaze/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  sed -i "s/CPUState/CPUM68KState/g" target-m68k/*.[hc]
  sed -i "s/#define CPUM68KState/#define CPUState/" target-m68k/cpu.h
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>