- 14 10月, 2011 2 次提交
-
-
由 Stefan Weil 提交于
cppcheck reported these errors: qemu-char.c:1667: error: Mismatching allocation and deallocation: s qemu-char.c:1668: error: Mismatching allocation and deallocation: chr qemu-char.c:1769: error: Mismatching allocation and deallocation: s qemu-char.c:1770: error: Mismatching allocation and deallocation: chr Tested-by: NDongxu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Stefan Hajnoczi 提交于
Preprocessor directives cannot be used in STEXI/ETEXI sections since they are not passed through the preprocessor. The spicevmc chardev option help currently uses #if, which is included verbatim in the man page output. Fix this by simply stating that spicevmc chardevs are available only in builds with spice support. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 10 10月, 2011 3 次提交
-
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
- 09 10月, 2011 4 次提交
-
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Avi Kivity 提交于
* upstream: (87 commits) target-alpha: Fix compilation errors for 32 bit hosts target-alpha: Add high-resolution access to wall clock and an alarm. target-alpha: Implement HALT IPR. target-alpha: Implement WAIT IPR. target-alpha: Add CLIPPER emulation. target-alpha: Add custom PALcode image for CLIPPER emulation. target-alpha: Honor icount for RPCC instruction. tcg/s390: Remove unused tcg_out_addi() tcg/ia64: Remove unused tcg_out_addi() ARM: fix segfault ppc64: Fix linker script pseries: Implement set-time-of-day RTAS function pseries: Refactor spapr irq allocation PPC: Clean up BookE timer code PPC: booke timers KVM: PPC: Use HIOR setting for -M pseries with PR KVM KVM: Update kernel headers KVM: Update kernel headers PPC: Fix heathrow PIC to use little endian MMIO PPC: Fix via-cuda memory registration ... Conflicts: hw/milkymist-uart.c hw/ppce500_mpc8544ds.c Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Stefan Weil 提交于
On i386, these errors were reported: qemu/hw/alpha_dp264.c: In function ‘clipper_init’: qemu/hw/alpha_dp264.c:158: error: integer constant is too large for ‘unsigned long’ type qemu/hw/alpha_typhoon.c: In function ‘typhoon_init’: qemu/hw/alpha_typhoon.c:737: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:741: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:745: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:749: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:757: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:767: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:772: error: integer constant is too large for ‘long’ type Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
git://repo.or.cz/qemu/rth由 Blue Swirl 提交于
* 'axp-system-7' of git://repo.or.cz/qemu/rth: target-alpha: Add high-resolution access to wall clock and an alarm. target-alpha: Implement HALT IPR. target-alpha: Implement WAIT IPR. target-alpha: Add CLIPPER emulation. target-alpha: Add custom PALcode image for CLIPPER emulation. target-alpha: Honor icount for RPCC instruction.
-
- 08 10月, 2011 12 次提交
-
-
由 Richard Henderson 提交于
The alarm is a fully general one-shot time comparator, which will be usable under Linux as a hrtimer source. It's much more flexible than the RTC source available on real hardware. The wall clock allows the guest access to the host timekeeping. Much like the KVM wall clock source for other guests. Both are accessed via the PALcode Cserve entry point. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This is a DP264 variant, SMP capable, no unusual hardware present. The emulation does not currently include any PCI IOMMU code. Hopefully the generic support for that can be merged to HEAD soon. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
git://git.serverraum.org/git/mw/qemu-lm32由 Blue Swirl 提交于
* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32: milkymist: new interrupt map milkymist_uart: support new core version lm32: add missing qemu_init_vcpu() call
-
git://repo.or.cz/qemu/stefanha由 Blue Swirl 提交于
* 'tracing' of git://repo.or.cz/qemu/stefanha: trace: add arguments to bdrv_co_io_em() trace event trace: trace monitor qmp dispatch/completion trace: trace bdrv_open_common() hmp: re-enable trace-file command
-
由 Peter Maydell 提交于
Remove the unused function tcg_out_addi() from the s390 TCG backend; this brings it into line with other backends. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Acked-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Remove the unused function tcg_out_addi() from the ia64 TCG backend; this brings it into line with other backends. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
git://repo.or.cz/qemu/agraf由 Blue Swirl 提交于
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (64 commits) ppc64: Fix linker script pseries: Implement set-time-of-day RTAS function pseries: Refactor spapr irq allocation PPC: Clean up BookE timer code PPC: booke timers KVM: PPC: Use HIOR setting for -M pseries with PR KVM KVM: Update kernel headers KVM: Update kernel headers PPC: Fix heathrow PIC to use little endian MMIO PPC: Fix via-cuda memory registration ppc: move ADB stuff from ppc_mac.h to adb.h openpic: Unfold write_IRQreg openpic: Unfold read_IRQreg ppc405: use RAM_ADDR_FMT instead of %08lx Gdbstub: handle read of fpscr vscsi: send the CHECK_CONDITION status down together with autosense data pseries: Implement hcall-bulk hypervisor interface Implement POWER7's CFAR in TCG ppc: booke206: use MAV=2.0 TSIZE definition, fix 4G pages ppc: booke206: add "info tlb" support ...
-
由 Blue Swirl 提交于
Fix a bug in bccd9ec5, target-arm/op_helper.c missed a change unlike all other targets. This lead to a NULL pointer dereferences. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 10月, 2011 19 次提交
-
-
由 Andreas Färber 提交于
Since commit 8733f609 (Fix linker scripts) linking on Linux/ppc64 fails: LINK ppc64-linux-user/qemu-ppc64 /usr/lib64/gcc/powerpc64-suse-linux/4.3/../../../../powerpc64-suse-linux/bin/ld:/home/afaerber/qemu/ppc64.ld:84: syntax error collect2: ld gab 1 als Ende-Status zurück make[1]: *** [qemu-ppc64] Fehler 1 make: *** [subdir-ppc64-linux-user] Fehler 2 Fix by removing a leftover line in the ppc64 linker script. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Breno Leitao 提交于
Currently there is no implementation for set-time-of-day rtas function, which causes the following warning "setting the clock failed (-1)" on the guest. This patch just creates this function, get the timedate diff and store in the papr environment, so that the correct value will be returned by get-time-of-day. In order to try it, just adjust the hardware time, run hwclock --systohc, so that, on when the system runs hwclock --hctosys, the value is correctly adjusted, i.e. the host time plus the timediff. Signed-off-by: NBreno Leitao <brenohl@br.ibm.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
Paulo Bonzini changed the original spapr code, which manually assigned irq numbers for each virtual device, to allocate them automatically from the device initialization. That allowed spapr virtual devices to be constructed with -device, which is a good start. However, the way that patch worked doesn't extend nicely for the future when we want to support devices other than sPAPR VIO devices (e.g. virtio and PCI). This patch rearranges the irq allocation to be global across the sPAPR environment, so it can be used by other bus types as well. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The BookE timer code had some written-but-not-read variables. Get rid of them. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Fabien Chouteau 提交于
While working on the emulation of the freescale p2010 (e500v2) I realized that there's no implementation of booke's timers features. Currently mpc8544 uses ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for example booke uses different SPR). Signed-off-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When running with PR KVM, we need to set HIOR directly. Thankfully there is now a new interface to set registers individually so we can just use that and poke HIOR into the guest vcpu's HIOR register. While at it, this also sets SDR1 because -M pseries requires it to run. With this patch, -M pseries works properly with PR KVM. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Update HIOR and generic register get/set. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Removes ABI-breaking HIOR parts - KVM patch to follow. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
During the memory API conversion, the indication on little endianness of MMIO for the heathrow PIC got dropped. This patch adds it back again. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Commit 23c5e4ca (convert to memory API) broke the VIA Cuda emulation layer by not registering the IO structs. This patch registers them properly and thus makes -M g3beige and -M mac99 work again. Tested-by: NAndreas Färber <andreas.faerber@web.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Laurent Vivier 提交于
Allow to use ADB in non-ppc macintosh Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The helper function write_IRQreg was always called with a specific argument on the type of register to access. Inside the function we were simply doing a switch on that constant argument again. It's a lot easier to just unfold this into two separate functions and call each individually. Reported-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The helper function read_IRQreg was always called with a specific argument on the type of register to access. Inside the function we were simply doing a switch on that constant argument again. It's a lot easier to just unfold this into two separate functions and call each individually. Reported-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Stefan Hajnoczi 提交于
The RAM_ADDR_FMT macro hides the type of ram_addr_t so that format strings can be safely used. Make sure to use RAM_ADDR_FMT so that the build works on 32-bit hosts with Xen enabled. Whether Xen should affect ppc TCG targets is questionable but a separate issue. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Fabien Chouteau 提交于
Signed-off-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paolo Bonzini 提交于
I introduced this bug in commit 05751d3f (vscsi: always use get_sense, 2011-08-03) because at the time there was no way to expose a sense condition to SLOF and Linux manages to work around the bug. However, the bug becomes evident now that SCSI devices also report unit attention on reset. SLOF also has problems dealing with unit attention conditions, so it still will not boot even with this fix (just like OpenBIOS). IBM folks are aware of their part of the bug. :-) Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
This patch adds support for the H_REMOVE_BULK hypercall on the pseries machine. Strictly speaking this isn't necessarym since the kernel will only attempt to use this if hcall-bulk is advertised in the device tree, which previously it was not. Adding this support may give a marginal performance increase, but more importantly it reduces the differences between the emulated machine and an existing PowerVM or kvm system, both of which already implement hcall-bulk. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
This patch implements support for the CFAR SPR on POWER7 (Come From Address Register), which snapshots the PC value at the time of a branch or an rfid. The latest powerpc-next kernel also catches it and can show it in xmon or in the signal frames. This works well enough to let recent kernels boot (which otherwise oops on the CFAR access). It hasn't been tested enough to be confident that the CFAR values are actually accurate, but one thing at a time. Signed-off-by: NBen Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This definition is backward compatible with MAV=1.0 as long as the guest does not set reserved bits in MAS1/MAS4. Also, fix the shift in booke206_tlb_to_page_size -- it's the base that should be able to hold a 4G page size, not the shift count. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-