Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Build vscclient from toplevel Makefile, limit usage of vpath.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After this patch, the libhw* directories will have a hierarchy
that mimics the source tree.  This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch starts converting the hw/ directory.  Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.

After this patch, the files that are compiled once will show the
same hierarchy in the build tree as they do in the source tree,
for example hw/qdev.o instead of just qdev.o.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Also drop duplicate occurrence of device-hotplug.o.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Some systems may declare environ automatically, others don't. Check for it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

This new 'Qemu' was recently added.
Replace it by the official all upper case 'QEMU'.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

When auto-detecting VirtFS support, virtfs="". Set it to "no" after
checking whether it was explicitly requested through --enable-virtfs.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid tab-indention and fit in with the surrounding code.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Update the configure test for libiscsi support to detect version 1.3
or later.  Version 1.3 of libiscsi provides both READCAPACITY16 as well
as UNMAP commands.

Update the iscsi block layer to use READCAPACITY16 to detect the size of
the LUN instead of READCAPACITY10. This allows support for LUNs larger
than 2TB.

Update to implement bdrv_aio_discard() using the UNMAP command.
This allows us to use thin-provisioned LUNs from TGTD and other iSCSI
targets that support thin-provisioning.
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
[squashed in subsequent patch from Ronnie to fix off-by-one in LBA count]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Requiring spice-server >= 0.8.2 is not enough since spice-server.pc
doesn't require spice-protocol (any version). Until that is fixed
upstream an explicit requirement in qemu fixes compilation broken since

commit 2e1a98c9
Author: Alon Levy <alevy@redhat.com>
Date:   Fri Feb 24 23:19:30 2012 +0200

    qxl: introduce QXLCookie
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The tracetool code requires Python 2.4, which was released in 2004.
Check for a supported Python version so we can give a clear error
message.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>

Move socket-related Solaris libraries to $solarisnetlibs and use them
for both $LIBS and $libs_qga.

Fixes build on illumos without --disable-guest-agent.
Signed-off-by: NLee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The MinGW toolchain on w32/w64 hosts does not create symbolic links,
but implements 'ln -s' similar to 'cp -r'.

In incremental out of tree builds, this resulted in files which
were not updated when their counterparts in the QEMU source tree
changed. Especially for Makefile* this happened very often.

With this patch, the 'symlinked' files are now always updated for
out of tree builds. Similar code was already used for the symbolic
link of libcacard/Makefile.

The symlink macro always removes the target before it is created
again, therefore the rm command for libcacard/Makefile was redundant
and is removed now.

Macro symlink is also used with directories. To remove them on w32
hosts, a recursive rm is needed.

v2:
Quote arguments in shell function symlink, and also quote any argument
which is passed to symlink and which contains macros. This should reduce
the chance of accidents caused by rm -rf.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.

Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

When SDL support is disabled, there is no way to build QEMU without
Cocoa support on MacOS X. This patch adds '--disable-cocoa' switch and
allows to build QEMU without both SDL and Cocoa frontends.
Signed-off-by: NPavel Borzenkov <pavel.borzenkov@gmail.com>
[AF: Adapt help output]
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Fixes the build when combined with the drop of darwin-user.
Enthusiasts can still try building it using --enable-bsd-user.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Cc: Bernhard Walle <bernhard@bwalle.de>
Tested-by: Bernhard Walle <bernhard@bwalle.de> [Mac OS 10.7.3]
Acked-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reverts commit d10f9056 due to a build
breakage.

See http://spunk.home.kraxel.org/bb/builders/ubuntu-default/builds/52Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  remove the extra pthread switch which might be there
  from the package config check for gthreads.
Signed-off-by: NPeter Portante <peter.portante@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Only proxy helper does.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will allow the user to make Qemu use a different subdirectory name
inside $datadir and $sysconfdir, instead of "/qemu".
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Autoconf uses --datadir for the /usr/share directory, not the
program-specific subdirectory inside /usr/share. This changes configure
to match autoconf behavior.

Note that this will break compatibility with existing build scripts.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cosmetic change.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There is no code using that variable according to 'git grep', so kill
it.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

$confdir is a confusing name, as it's not clear if it's "the system
config dir" or "the Qemus-specific directory inside the config dir".
$qemu_confdir makes it more clear.

The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for
both "confdir" and "qemu_confdir" variables.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.

The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There's no "confdir" variable on Autoconf, but it's good to make it
clear that it's a variable for the Qemu-specific subdirectory inside
$sysconfdir.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The autoconf "docdir" variable is used for the program-specific
subdirectory, but anyway it's better to make it clear that the variable
is used for the qemu-specific subdirectory path.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The variable is used for the qemu-specific directory and has a different
meaning of the autoconf "datadir" variable (that's used for the
$prefix/share directory, not for $prefix/share/PACKAGE).

This doesn't change behavior or interfaces, it's just an internal
variable rename.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.

This patch replaces the shell version of tracetool with a Python
version.  The new tracetool design is:

  scripts/tracetool.py - top-level script
  scripts/tracetool/backend/ - tracer backends live here (simple, ust)
  scripts/tracetool/format/  - output formats live here (.c, .h)

There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.

Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.

[Commit description written by Stefan Hajnoczi]
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Xen 4.2 is the first to support xc_hvm_inject_msi: use it to determine
if we are running on it.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NAnthony PERARD <anthony.perard@citrix.com>

Signed-off-by: NMarc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Our Python scripts require Python 2 and will fail on Python 3, eg:
  File "/home/petmay01/linaro/qemu-from-laptop/qemu/scripts/qapi-commands.py", line 378
      except getopt.GetoptError, err:
                               ^
  SyntaxError: invalid syntax

Add a check to configure that Python is not a Python 3, so we can
fail with a comprehensible error rather than an obscure one.
Reported-by: NBoris Matti <swiftos@lavabit.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>