Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-6-vsementsov@virtuozzo.com>
[eblake: adjust to next available test number]
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement QemuIoInteractive to test nbd-server-remove command when
there are active connections.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-5-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180119135719.24745-4-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Add command for removing an export. It is needed for cases when we
don't want to keep the export after the operation on it was completed.
The other example is a temporary node, created with blockdev-add.
If we want to delete it we should firstly remove any corresponding
NBD export.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-3-vsementsov@virtuozzo.com>
[eblake: drop dead nb_clients code]
Signed-off-by: NEric Blake <eblake@redhat.com>

Extend the flexibility of the previous QMP patch to also work
in HMP.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180109192802.17167-1-eblake@redhat.com>

Allow user to specify name for new export, to not reuse internal
node name and to not show it to clients.

This also allows creating several exports per device.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180119135719.24745-2-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Merge remote-tracking branch 'remotes/edgar/tags/edgar/xilinx-next-2018-01-26.for-upstream' into staging

Xilinx queue

# gpg: Signature made Fri 26 Jan 2018 10:17:01 GMT
# gpg:                using RSA key 0x29C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>"
# gpg:                 aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>"
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF  4151 29C5 9678 0F6B CA83

* remotes/edgar/tags/edgar/xilinx-next-2018-01-26.for-upstream:
  xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
  xlnx-zynqmp-pmu: Connect the IPI device to the PMU
  xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
  xlnx-zynqmp-pmu: Connect the PMU interrupt controller
  xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
  aarch64-softmmu.mak: Use an ARM specific config
  xlnx-zynqmp-pmu: Add the CPU and memory
  xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
  microblaze: boot.c: Don't try to find NULL file
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: -usbdevice cleanups, storage fix, QOMify ccid.

# gpg: Signature made Fri 26 Jan 2018 08:04:49 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20180126-v3-pull-request:
  usb-ccid: convert CCIDCardClass::exitfn() -> unrealize()
  usb-ccid: inline ccid_card_initfn() in ccid_card_realize()
  hw/usb/ccid: Make ccid_card_init() take an error parameter
  usb-storage: Fix share-rw option parsing
  usb: Remove legacy -usbdevice options (host, serial, disk and net)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Fri 26 Jan 2018 07:59:45 GMT
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to b5c93acd14 built from submodule.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This is the initial version of the Inter Processor Interrupt device.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Add the PMU IO Module Interrupt controller device.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

In preperation for having an ARM and MicroBlaze ZynqMP machine let's
split out the current ARM specific config options.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Connect the MicroBlaze CPU and the ROM and RAM memory regions.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The Xilinx ZynqMP SoC has two main processing systems in it. The ARM
processing system (which is already modeled in QEMU) and the MicroBlaze
Power Management Unit (PMU). This is the inital work for adding support
for the PMU.

The PMU susbsystem runs along side the ARM system on hardware, but due
to architecture limitations in QEMU the two instances are seperate for
the time being.

Let's follow the same setup we do with the ARM system, where there is an
SoC device and a ZCU102 board. Although the PMU is less board specific
we are still going to follow the same split as maybe in future we can
connect the PMU device to the ARM ZCU102 board. As the machine will be
fairly small let's keep them both together in one file.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Previously if no device tree was passed to microblaze_load_kernel() then
qemu_find_file() would try to find a NULL pointer. To avoid this put a
check around qemu_find_file().
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

# gpg: Signature made Thu 25 Jan 2018 15:15:03 GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-2.12-pull-request:
  target/m68k: add HMP command "info tlb"
  target/m68k: add pflush/ptest
  target/m68k: add moves
  target/m68k: add index parameter to gen_load()/gen_store() and Co.
  target/m68k: add Transparent Translation
  target/m68k: add MC68040 MMU
  accel/tcg: add size paremeter in tlb_fill()
  target/m68k: fix TCG variable double free
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-4-f4bug@amsat.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-3-f4bug@amsat.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace init() of CCIDCardClass with realize, then convert
ccid_card_init(), ccid_card_initfn() and it's callbacks to
take an Error** in ordor to report the error more clearly.
Signed-off-by: NMao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-2-f4bug@amsat.org
[PMD: fixed s->card assignation in ccid_card_realize()]
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Because usb-storage creates an internal scsi device, we should propagate
options. We already do so for bootindex etc, but failed to take care of
share-rw. Fix it in an apparent way: add a new parameter to
scsi_bus_legacy_add_drive and pass in s->conf.share_rw.

Cc: qemu-stable@nongnu.org
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NDarren Kenny <darren.kenny@oracle.com>
Message-id: 20180117005222.4781-1-famz@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.

This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).

Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com

[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

ui: convert to keycodedb, fix sign extension
sdl: cleanups, deprecate sdl 1.2

# gpg: Signature made Thu 25 Jan 2018 14:31:47 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180125-pull-request:
  sdl: reorganize -no-frame support
  sdl: use ctrl-alt-g as grab hotkey
  ui: deprecate use of SDL 1.2 in favour of 2.0 series
  ui: ignore hardware keycode 255 on win32
  ui: add fix for GTK Pause key handling on Win32
  ui: convert GTK and SDL1 frontends to keycodemapdb
  ui: convert the SDL2 frontend to keycodemapdb
  ui: avoid sign extension using client width/height
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * target/arm: Fix address truncation in 64-bit pagetable walks
 * i.MX: Fix FEC/ENET receive functions
 * target/arm: preparatory refactoring for SVE emulation
 * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
 * hw/intc/arm_gic: Fix C_RPR value on idle priority
 * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
 * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
 * hw/arm/virt: Check that the CPU realize method succeeded
 * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
 * xilinx_spips: Correct usage of an uninitialized local variable
 * pl110: Implement vertical compare/next base interrupts

# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
  pl110: Implement vertical compare/next base interrupts
  xilinx_spips: Correct usage of an uninitialized local variable
  sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
  hw/arm/virt: Check that the CPU realize method succeeded
  hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  hw/intc/arm_gic: Fix C_RPR value on idle priority
  hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  target/arm: Simplify fp_exception_el for user-only
  target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
  target/arm: Move cpu_get_tb_cpu_state out of line
  target/arm: Add ARM_FEATURE_SVE
  vmstate: Add VMSTATE_UINT64_SUB_ARRAY
  target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
  target/arm: Change the type of vfp.regs
  target/arm: Use pointers in neon tbl helper
  target/arm: Use pointers in neon zip/uzp helpers
  target/arm: Use pointers in crypto helpers
  target/arm: Mark disas_set_insn_syndrome inline
  i.MX: Fix FEC/ENET receive funtions
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qemu-sparc update

# gpg: Signature made Thu 25 Jan 2018 13:44:58 GMT
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed:
  sun4u: implement power device
  sparc64: convert hw/sparc64/sparc64.c from DPRINTF macros to trace events
  sabre: convert from SABRE_DPRINTF macro to trace-events
  apb: rename apb.c to sabre.c
  sun4u: rename apb variables and constants
  apb: rename QOM type from TYPE_APB to TYPE_SABRE
  apb: QOMify sabre PCI host bridge
  apb: change pbm_pci_host prefix functions to use sabre_pci prefix
  apb: rename APB functions to use sabre prefix
  simba: rename PBMPCIBridge and QOM types to reflect simba naming
  apb: split simba PCI bridge into hw/pci-bridge/simba.c
  sparc/leon3 irqmp: fix IRQ software ack
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: fix for CVE-2018-5683

# gpg: Signature made Thu 25 Jan 2018 09:33:23 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180125-pull-request:
  vga: check the validation of memory addr when draw text
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Dump MMU state and address mappings.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-8-laurent@vivier.eu>

Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-7-laurent@vivier.eu>

and introduce SFC and DFC control registers.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-6-laurent@vivier.eu>

The instruction "moves" can select source and destination
address space (user or kernel). This patch modifies
all the load/store functions to be able to provide
the address space the caller wants to use instead
of using the current one. All the callers are modified
to provide the default address space to these functions.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-5-laurent@vivier.eu>

Add ittr0, ittr1, dttr0, dttr1 and manage Transparent Translations
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-4-laurent@vivier.eu>

Only add MC68040 MMU page table processing and related
registers (Special Status Word, Translation Control Register,
User Root Pointer and Supervisor Root Pointer).

Transparent Translation Registers, DFC/SFC and pflush/ptest
will be added later.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-3-laurent@vivier.eu>

The MC68040 MMU provides the size of the access that
triggers the page fault.

This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.

So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().

To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.

This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>

t64 is also unconditionally freed after the switch () { ... }
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <huth@tuxfamily.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180119114444.7590-1-laurent@vivier.eu>

Drop no_frame flag from sdl_display_init argument list, use a global
variable instead.  This is temporary until -no-frame support is dropped
altogether when we remove sdl1 support.

Remove any traces of noframe from sdl2 code.  It is just dead code as
sdl2 doesn't support the SDL_NOFRAME window flag any more.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-3-kraxel@redhat.com

Be consistent with gtk and cocoa.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-2-kraxel@redhat.com

The SDL 2.0 release was made in Aug, 2013:

  https://www.libsdl.org/release/

That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.

Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>