In case of backend crash, it is not possible to restore internal
avail index from the backend value as vhost_get_vring_base
callback fails.

This patch provides a new interface to restore internal avail index
from the vring used index, as done by some vhost-user backend on
reconnection.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

According to SDM 10.11.1, only [19:12] bits of MSI address are
Destination ID, change the mask to avoid ambiguity for VT-d spec
has used the bit 4 to indicate a remappable interrupt request.
Signed-off-by: NChao Gao <chao.gao@intel.com>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Reviewed-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block layer patches for 2.11.0-rc3

# gpg: Signature made Wed 29 Nov 2017 15:25:13 GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  block/nfs: fix nfs_client_open for filesize greater than 1TB
  blockjob: reimplement block_job_sleep_ns to allow cancellation
  blockjob: introduce block_job_do_yield
  blockjob: remove clock argument from block_job_sleep_ns
  block: Expect graph changes in bdrv_parent_drained_begin/end
  blockjob: Remove the job from the list earlier in block_job_unref()
  QAPI & interop: Clarify events emitted by 'block-job-cancel'
  qemu-options: Mention locking option of file driver
  docs: Add image locking subsection
  iotests: fix 075 and 078
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

One block patch for 2.11.0-rc3

# gpg: Signature made Wed Nov 29 15:28:38 2017 CET
# gpg:                using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* mreitz/tags/pull-block-2017-11-29:
  block/nfs: fix nfs_client_open for filesize greater than 1TB
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

DIV_ROUND_UP(st.st_size, BDRV_SECTOR_SIZE) was overflowing ret (int) if
st.st_size is greater than 1TB.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Lieven <pl@kamp.de>
Message-id: 1511798407-31129-1-git-send-email-pl@kamp.de
Signed-off-by: NMax Reitz <mreitz@redhat.com>

This reverts the effects of commit 4afeffc8 ("blockjob: do not allow
coroutine double entry or entry-after-completion", 2017-11-21)

This fixed the symptom of a bug rather than the root cause. Canceling the
wait on a sleeping blockjob coroutine is generally fine, we just need to
make it work correctly across AioContexts.  To do so, use a QEMUTimer
that calls block_job_enter.  Use a mutex to ensure that block_job_enter
synchronizes correctly with block_job_sleep_ns.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-By: NJeff Cody <jcody@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Hide the clearing of job->busy in a single function, and set it
in block_job_enter.  This lets block_job_do_yield verify that
qemu_coroutine_enter is not used while job->busy = false.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-By: NJeff Cody <jcody@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

All callers are using QEMU_CLOCK_REALTIME, and it will not be possible to
support more than one clock when block_job_sleep_ns switches to a single
timer stored in the BlockJob struct.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Tested-By: NJeff Cody <jcody@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The .drained_begin/end callbacks can (directly or indirectly via
aio_poll()) cause block nodes to be removed or the current BdrvChild to
point to a different child node.

Use QLIST_FOREACH_SAFE() to make sure we don't access invalid
BlockDriverStates or accidentally continue iterating the parents of the
new child node instead of the node we actually came from.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When destroying a block job in block_job_unref() we should remove it
from the job list before calling block_job_remove_all_bdrv().

This is because removing the BDSs can trigger an aio_poll() and wake
up other jobs that might attempt to use the block job list. If that
happens the job we're currently destroying should not be in that list
anymore.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

nbd patches for 2017-11-28

Eric Blake - 0/2 fix two NBD server CVEs

# gpg: Signature made Tue 28 Nov 2017 12:58:29 GMT
# gpg:                using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2017-11-28:
  nbd/server: CVE-2017-15118 Stack smash on large export name
  nbd/server: CVE-2017-15119 Reject options larger than 32M
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Introduced in commit f37708f6 (2.10).  The NBD spec says a client
can request export names up to 4096 bytes in length, even though
they should not expect success on names longer than 256.  However,
qemu hard-codes the limit of 256, and fails to filter out a client
that probes for a longer name; the result is a stack smash that can
potentially give an attacker arbitrary control over the qemu
process.

The smash can be easily demonstrated with this client:
$ qemu-io f raw nbd://localhost:10809/$(printf %3000d 1 | tr ' ' a)

If the qemu NBD server binary (whether the standalone qemu-nbd, or
the builtin server of QMP nbd-server-start) was compiled with
-fstack-protector-strong, the ability to exploit the stack smash
into arbitrary execution is a lot more difficult (but still
theoretically possible to a determined attacker, perhaps in
combination with other CVEs).  Still, crashing a running qemu (and
losing the VM) is bad enough, even if the attacker did not obtain
full execution control.

CC: qemu-stable@nongnu.org
Signed-off-by: NEric Blake <eblake@redhat.com>

The NBD spec gives us permission to abruptly disconnect on clients
that send outrageously large option requests, rather than having
to spend the time reading to the end of the option.  No real
option request requires that much data anyways; and meanwhile, we
already have the practice of abruptly dropping the connection on
any client that sends NBD_CMD_WRITE with a payload larger than 32M.

For comparison, nbdkit drops the connection on any request with
more than 4096 bytes; however, that limit is probably too low
(as the NBD spec states an export name can theoretically be up
to 4096 bytes, which means a valid NBD_OPT_INFO could be even
longer) - even if qemu doesn't permit exports longer than 256
bytes.

It could be argued that a malicious client trying to get us to
read nearly 4G of data on a bad request is a form of denial of
service.  In particular, if the server requires TLS, but a client
that does not know the TLS credentials sends any option (other
than NBD_OPT_STARTTLS or NBD_OPT_EXPORT_NAME) with a stated
payload of nearly 4G, then the server was keeping the connection
alive trying to read all the payload, tying up resources that it
would rather be spending on a client that can get past the TLS
handshake.  Hence, this warranted a CVE.

Present since at least 2.5 when handling known options, and made
worse in 2.6 when fixing support for NBD_FLAG_C_FIXED_NEWSTYLE
to handle unknown options.

CC: qemu-stable@nongnu.org
Signed-off-by: NEric Blake <eblake@redhat.com>

Merge qio 2017/11/28 v1

# gpg: Signature made Tue 28 Nov 2017 10:49:08 GMT
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qio-2017-11-28-1:
  sockets: avoid crash when cleaning up sockets for an invalid FD
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If socket_listen_cleanup is passed an invalid FD, then querying the socket
local address will fail. We must thus be prepared for the returned addr to
be NULL
Reported-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

# gpg: Signature made Tue 28 Nov 2017 03:58:11 GMT
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  virtio-net: don't touch virtqueue if vm is stopped
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Guest state should not be touched if VM is stopped, unfortunately we
didn't check running state and tried to drain tx queue unconditionally
in virtio_net_set_status(). A crash was then noticed as a migration
destination when user type quit after virtqueue state is loaded but
before region cache is initialized. In this case,
virtio_net_drop_tx_queue_data() tries to access the uninitialized
region cache.

Fix this by only dropping tx queue data when vm is running.

Fixes: 283e2c2a ("net: virtio-net discards TX data after link down")
Cc: Yuri Benditovich <yuri.benditovich@daynix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

When you cancel an in-progress 'mirror' job (or "active `block-commit`")
with QMP `block-job-cancel`, it emits the event: BLOCK_JOB_CANCELLED.
However, when `block-job-cancel` is issued *after* `drive-mirror` has
indicated (via the event BLOCK_JOB_READY) that the source and
destination have reached synchronization:

    [...] # Snip `drive-mirror` invocation & outputs
    {
      "execute":"block-job-cancel",
      "arguments":{
        "device":"virtio0"
      }
    }

    {"return": {}}

It (`block-job-cancel`) will counterintuitively emit the event
'BLOCK_JOB_COMPLETED':

    {
      "timestamp":{
        "seconds":1510678024,
        "microseconds":526240
      },
      "event":"BLOCK_JOB_COMPLETED",
      "data":{
        "device":"virtio0",
        "len":41126400,
        "offset":41126400,
        "speed":0,
        "type":"mirror"
      }
    }

But this is expected behaviour, where the _COMPLETED event indicates
that synchronization has successfully ended (and the destination now has
a point-in-time copy, which is at the time of cancel).

So add a small note to this effect in 'block-core.json'.  While at it,
also update the "Live disk synchronization -- drive-mirror and
blockdev-mirror" section in 'live-block-operations.rst'.

(Thanks: Max Reitz for reminding me of this caveat on IRC.)
Signed-off-by: NKashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ppc patch queue 2017-11-27

This series contains a couple of migration fixes for hash guests on
POWER9 radix MMU hosts.

# gpg: Signature made Mon 27 Nov 2017 04:27:15 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.11-20171127:
  target/ppc: Fix setting of cpu->compat_pvr on incoming migration
  target/ppc: Move setting of patb_entry on hash table init
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This documents the image locking feature and explains when and how
related options can be used.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Both of these tests are for formats which now stipulate that they are
read-only. Adjust the tests to match.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NLukáš Doktor <ldoktor@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

cpu->compat_pvr is used to store the current compat mode of the cpu.

On the receiving side during incoming migration we check compatibility
with the compat mode by calling ppc_set_compat(). However we fail to set
the compat mode with the hypervisor since the "new" compat mode doesn't
differ from the current (due to a "cpu->compat_pvr != compat_pvr" check).
This means that kvm runs the vcpus without a compat mode, which is the
incorrect behaviour. The implication being that a compatibility mode
will never be in effect after migration.

To fix this so that the compat mode is correctly set with the
hypervisor, store the desired compat mode and reset cpu->compat_pvr to
zero before calling ppc_set_compat().

Fixes: 5dfaa532 ("ppc: fix ppc_set_compat() with KVM PR")
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The patb_entry is used to store the location of the process table in
guest memory. The msb is also used to indicate the mmu mode of the
guest, that is patb_entry & 1 << 63 ? radix_mode : hash_mode.

Currently we set this to zero in spapr_setup_hpt_and_vrma() since if
this function gets called then we know we're hash. However some code
paths, such as setting up the hpt on incoming migration of a hash guest,
call spapr_reallocate_hpt() directly bypassing this higher level
function. Since we assume radix if the host is capable this results in
the msb in patb_entry being left set so in spapr_post_load() we call
kvmppc_configure_v3_mmu() and tell the host we're radix which as
expected means addresses cannot be translated once we actually run the cpu.

To fix this move the zeroing of patb_entry into spapr_reallocate_hpt().
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

In our various supported host OSes, the time_t type may be either 32
or 64 bit, and could in theory also be either signed or unsigned.
Notably, in OpenBSD time_t is a 64 bit type even if 'long' is 32
bits, so using LONG_MAX for TIME_MAX is incorrect.

Use an approach suggested by Paolo Bonzini which calculates
the maximum value of the type rather than hardcoding it;
to do this we use the TYPE_MAXIMUM macro from Gnulib.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1511452598-6077-1-git-send-email-peter.maydell@linaro.org

Add virt-2.11 machine type.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1511516626-21178-1-git-send-email-eric.auger@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Deal with the fallout from the deletion of the old s390 virtio header
in Linux master.

# gpg: Signature made Fri 24 Nov 2017 09:56:49 GMT
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20171124:
  s390/kvm_virtio/linux-headers: remove traces of old virtio transport
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We no longer support the old s390 transport, neither does the newest
Linux kernel. Remove it from the linux header script as well as the
s390x virtio code.  We still should handle the VIRTIO_NOTIFY hypercall,
to tolerate early printk on older guest kernels without an sclp console.
We continue to ignore these events.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171115154223.109991-1-borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

OpenBSD/i386 uses elf_i386_obsd for the emulation linker.
Signed-off-by: NBrad Smith <brad@comstyle.com>
Message-id: 20171107234608.GA395@humpty.home.comstyle.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20171122

# gpg: Signature made Wed 22 Nov 2017 08:43:13 GMT
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20171122:
  migration/ram.c: do not set 'postcopy_running' in POSTCOPY_INCOMING_END
  migration, xen: Fix block image lock issue on live migration
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2017-11-22

Several more fixes to merge for qemu-2.11.

# gpg: Signature made Wed 22 Nov 2017 04:29:57 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.11-20171122:
  ppc: fix VTB migration
  spapr: Implement bug in spapr-vty device to be compatible with PowerVM
  hw/ppc/spapr: Fix virtio-scsi bootindex handling for LUNs >= 256
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It was broken by commit 8ecc89f6 which
moved the SDL linker flags from macro libs_softmmu to macro SDL_LIBS.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Message-id: 20171116163732.31584-1-sw@weilnetz.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 27266271 started to use tb_unlock() and tlb_set_dirty() on
non TCG code.  Add the functions as stubs, so that builds with TCG
disabled continue to compile.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: tweaked commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When migrating a VM with 'migrate_set_capability postcopy-ram on'
a postcopy_state is set during the process, ending up with the
state POSTCOPY_INCOMING_END when the migration is over. This
postcopy_state is taken into account inside ram_load to check
how it will load the memory pages. This same ram_load is called when
in a loadvm command.

Inside ram_load, the logic to see if we're at postcopy_running state
is:

postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING

postcopy_state_get() returns this enum type:

typedef enum {
    POSTCOPY_INCOMING_NONE = 0,
    POSTCOPY_INCOMING_ADVISE,
    POSTCOPY_INCOMING_DISCARD,
    POSTCOPY_INCOMING_LISTENING,
    POSTCOPY_INCOMING_RUNNING,
    POSTCOPY_INCOMING_END
} PostcopyState;

In the case where ram_load is executed and postcopy_state is
POSTCOPY_INCOMING_END, postcopy_running will be set to 'true' and
ram_load will behave like a postcopy is in progress. This scenario isn't
achievable in a migration but it is reproducible when executing
savevm/loadvm after migrating with 'postcopy-ram on', causing loadvm
to fail with Error -22:

Source:

(qemu) migrate_set_capability postcopy-ram on
(qemu) migrate tcp:127.0.0.1:4444

Dest:

(qemu) migrate_set_capability postcopy-ram on
(qemu)
ubuntu1704-intel login:
Ubuntu 17.04 ubuntu1704-intel ttyS0

ubuntu1704-intel login: (qemu)
(qemu) savevm test1
(qemu) loadvm test1
Unknown combination of migration flags: 0x4 (postcopy mode)
error while loading state for instance 0x0 of device 'ram'
Error -22 while loading VM state
(qemu)

This patch fixes this problem by changing the existing logic for
postcopy_advised and postcopy_running in ram_load, making them
'false' if we're at POSTCOPY_INCOMING_END state.
Signed-off-by: NDaniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reported-by: NBalamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Migration of a system under stress (for example, with
"stress-ng --numa 2") triggers on the destination
some kernel watchdog messages like:

NMI watchdog: BUG: soft lockup - CPU#0 stuck for 3489660870s!
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 3489660884s!

This problem appears with the changes introduced by
    42043e4f spapr: clock should count only if vm is running

I think this commit only triggers the problem.

Kernel computes the soft lockup duration using the
Virtual Timebase register (VTB), not using the Timebase
Register (TBR, the one 42043e4f stops).

It appears VTB is not migrated, so this patch adds it in
the list of the SPRs to migrate, and fixes the problem.

For the migration, I've tested a migration from qemu-2.8.0 and
pseries-2.8.0 to a patched master (qemu-2.11.0-rc1). The received
VTB is 0 (as is it not initialized by qemu-2.8.0), but the value
seems to be ignored by KVM and a non zero VTB is used by the kernel.
I have no explanation for that, but as the original problem appears
only with SMP system under stress I suspect some problems in KVM
(I think because VTB is shared by all threads of a core).
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The spapr-vty device implements the PAPR defined virtual console,
which is also implemented by IBM's proprietary PowerVM hypervisor.

PowerVM's implementation has a bug where it inserts an extra \0 after
every \r going to the guest.  Because of that Linux's guest side
driver has a workaround which strips \0 characters that appear
immediately after a \r.

That means that when running under qemu, sending a binary stream from
host to guest via spapr-vty which happens to include a \r\0 sequence
will get corrupted by that workaround.

To deal with that, this patch duplicates PowerVM's bug, inserting an
extra \0 after each \r.  Ugly, but the best option available.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>

LUNs >= 256 have to be encoded with the so-called "flat space
addressing method" for virtio-scsi, where an additional bit has to
be set. SLOF already took care of this with the following commit:

 https://git.qemu.org/?p=SLOF.git;a=commitdiff;h=f72a37713fea47da
 (see https://bugzilla.redhat.com/show_bug.cgi?id=1431584 for details)

But QEMU does not use this encoding yet for device tree paths
that have to be handed over to SLOF to deal with the "bootindex"
property, so SLOF currently fails to boot from virtio-scsi devices
with LUNs >= 256 in the right boot order. Fix it by using the bit
to indicate the "flat space addressing method" for LUNs >= 256.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

When doing a live migration of a Xen guest with libxl, the images for
block devices are locked by the original QEMU process, and this prevent
the QEMU at the destination to take the lock and the migration fail.

>From QEMU point of view, once the RAM of a domain is migrated, there is
two QMP commands, "stop" then "xen-save-devices-state", at which point a
new QEMU is spawned at the destination.

Release locks in "xen-save-devices-state" so the destination can takes
them, if it's a live migration.

This patch add the "live" parameter to "xen-save-devices-state" which
default to true so older version of libxenlight can work with newer
version of QEMU.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>