- 02 11月, 2015 17 次提交
-
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for socket-related code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-17-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for block-related code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-16-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for testsuite code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-15-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for qapi-visit.py. Generated code changes look like: |@@ -4912,16 +4912,16 @@ void visit_type_MemoryDeviceInfo(Visitor | if (!*obj) { | goto out_obj; | } |- visit_type_MemoryDeviceInfoKind(v, &(*obj)->kind, "type", &err); |+ visit_type_MemoryDeviceInfoKind(v, &(*obj)->type, "type", &err); | if (err) { | goto out_obj; | } |- if (!visit_start_union(v, !!(*obj)->data, &err) || err) { |+ if (!visit_start_union(v, !!(*obj)->u.data, &err) || err) { | goto out_obj; | } |- switch ((*obj)->kind) { |+ switch ((*obj)->type) { | case MEMORY_DEVICE_INFO_KIND_DIMM: |- visit_type_PCDIMMDeviceInfo(v, &(*obj)->dimm, "data", &err); |+ visit_type_PCDIMMDeviceInfo(v, &(*obj)->u.dimm, "data", &err); | break; | default: | abort(); |@@ -4930,7 +4930,7 @@ out_obj: | error_propagate(errp, err); | err = NULL; | if (*obj) { |- visit_end_union(v, !!(*obj)->data, &err); |+ visit_end_union(v, !!(*obj)->u.data, &err); | } | error_propagate(errp, err); | err = NULL; Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-14-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. This patch is the front end for a series that converts to a saner qapi union layout. By the end of the series, we will no longer have the type/kind mismatch, and all tag values will be under a named union, which requires clients to access 'obj->u.value' instead of 'obj->value'. But since the conversion touches a number of files, it is easiest if we temporarily support BOTH layouts simultaneously. Given a simple union qapi type: { 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } } make the following changes in generated qapi-types.h: | struct Foo { |- FooKind kind; |- union { /* union tag is @kind */ |+ union { |+ FooKind kind; |+ FooKind type; |+ }; |+ union { /* union tag is @type */ | void *data; | int64_t a; | bool b; |+ union { /* union tag is @type */ |+ void *data; |+ int64_t a; |+ bool b; |+ } u; | }; | }; Flat unions do not need the anonymous union for the tag member, as we already fixed that to use the member name instead of 'kind' back in commit 0f61af3e. One additional change is needed in qapi.py: check_union() now needs to check for collisions with 'type' in addition to those with 'kind'. Later, when the conversions are complete, we will remove the duplication hacks, and also drop the check_union() restrictions. Note, however, that we do not rename the generated enum, which is still 'FooKind'. A further patch could generate implicit enums as 'FooType', but while the generator already reserved the '*Kind' namespace (commit 4dc2e690), there are already QMP constructs with '*Type' naming, which means changing our reservation namespace would have lots of churn to C code to deal with a forced name change. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-13-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
The code for visiting the base class of a child struct created visit_type_Base_fields() which covers all fields of Base; while the code for visiting the base class of a flat union created visit_type_Union_fields() covering all fields of the base except the discriminator. But since the base class includes the discriminator of a flat union, we can just visit the entire base, without needing a separate visit of the discriminator. Not only is consistently visiting all fields easier to understand, it lets us share code. The generated code in qapi-visit.c loses several now-unused visit_type_UNION_fields(), along with changes like: |@@ -1654,11 +1557,7 @@ void visit_type_BlockdevOptions(Visitor | if (!*obj) { | goto out_obj; | } |- visit_type_BlockdevOptions_fields(v, obj, &err); |- if (err) { |- goto out_obj; |- } |- visit_type_BlockdevDriver(v, &(*obj)->driver, "driver", &err); |+ visit_type_BlockdevOptionsBase_fields(v, (BlockdevOptionsBase **)obj, &err); | if (err) { | goto out_obj; | } and forward declarations where needed. Note that the cast of obj to BASE ** is necessary to call visit_type_BASE_fields() (and we can't use our upcast wrappers, because those work on pointers while we have a pointer-to-pointer). Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-12-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616 "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
A previous patch (commit 1e6c1616) made it possible to directly cast from a qapi flat union type to its base type. However, it requires the use of a C cast, which turns off compiler type-safety checks. Fortunately, no such casts exist, just yet. Regardless, add inline type-safe wrappers named qapi_FOO_base() for any union type FOO that has a base, which can be used for a safer upcast, and enhance the testsuite to cover the new functionality. A future patch will extend the upcast support to structs, where such conversions do exist already. Note that C makes const-correct upcasts annoying because it lacks overloads; these functions cast away const so that they can accept user pointers whether const or not, and the result in turn can be assigned to normal or const pointers. Alternatively, this could have been done with macros, but type-safe macros are hairy, and not worthwhile here. This patch just adds upcasts. None of our code needed to downcast from a base qapi class to a child. Also, in the case of grandchildren (such as BlockdevOptionsQcow2), the caller will need to call two functions to get to the inner base (although it wouldn't be too hard to generate a qapi_FOO_base_base() if desired). If a user changes qapi to alter the base class hierarchy, such as going from 'A -> C' to 'A -> B -> C', it will change the type of 'qapi_C_base()', and the compiler will point out the places that are affected by the new base. One alternative was proposed, but was deemed too ugly to use in practice: the generators could output redundant information using anonymous types: | struct Child { | union { | struct { | Type1 parent_member1; | Type2 parent_member2; | }; | Parent base; | }; | }; With that ugly proposal, for a given qapi type, obj->member and obj->base.member would refer to the same storage; allowing convenience in working with members without needing 'base.' allowing typesafe upcast without needing a C cast by accessing '&obj->base', and allowing downcasts from the parent back to the child possible through container_of(obj, Child, base). Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-10-git-send-email-eblake@redhat.com> [Commit message tweaked] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Move code from gen_union() into gen_struct_fields() in order for a later patch to share code when enumerating inherited fields for struct types. No change to generated code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-9-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We generate a static visit_type_FOO_fields() for every type FOO. However, sometimes we need a forward declaration. Split the code to generate the forward declaration out of gen_visit_implicit_struct() into a new gen_visit_fields_decl(), and also prepare for a forward declaration to be emitted during gen_visit_struct(), so that a future patch can switch from using visit_type_FOO_implicit() to the simpler visit_type_FOO_fields() as part of unboxing the base class of a struct. No change to generated code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-8-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
A future qapi patch will rework generated structs with a base class to be unboxed. In preparation for that, change the code that allocates then populates an info struct to instead merely populate the fields of an info field passed in as a parameter (renaming vnc_basic_info_get* to vnc_init_basic_info*). Add rudimentary Error handling at the lowest levels for cases where the old code returned NULL; but rather than plumb Error all the way through the stack, the callers drop the error and return NULL as before. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-7-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
c_name() produces names starting with 'q_' when protecting a dictionary member name that would fail to directly compile, but in doing so can cause clashes with any member name already beginning with 'q-' or 'q_'. Likewise, we create a C name 'has_' for any optional member that can clash with any member name beginning with 'has-' or 'has_'. Technically, rather than blindly reserving the namespace, we could try to complain about user names only when an actual collision occurs, or even teach c_name() how to munge names to avoid collisions. But it is not trivial, especially when collisions can occur across multiple types (such as via inheritance or flat unions). Besides, no existing .json files are trying to use these names. So it's easier to just outright forbid the potential for collision. We can always relax things in the future if a real need arises for QMP to express member names that have been forbidden here. 'has_' only has to be reserved for struct/union member names, while 'q_' is reserved everywhere (matching the fact that only members can be optional, while we use c_name() for munging both members and entities). Note that we could relax 'q_' restrictions on entities independently from member names; for example, c_name('qmp_' + 'unix') would result in a different function name than our current 'qmp_' + c_name('unix'). Update and add tests to cover the new error messages. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-6-git-send-email-eblake@redhat.com> [Consistently pass protect=False to c_name(); commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Type names ending in 'List' can clash with qapi list types in generated C. We don't currently use such names. It is easier to outlaw them now than to worry about how to resolve such a clash in the future. For precedence, see commit 4dc2e690, which did the same for names ending in 'Kind' versus implicit enum types for qapi unions. Update the testsuite to match. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-5-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We were using regular expressions to see if ret included any earlier text that emitted a 'goto out;' line, to decide whether we needed to output an 'out:' label. But this is fragile, if the ret text can possibly combine more than one generated function body, where the first function used a goto but the second does not. Change the code to just check for the known conditions which cause an error check to be needed. Besides, it's slightly more efficient to use plain checks than regular expression searching. No change to generated code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-4-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Rather than slicing the end of a string, we can use python's endswith(). And rather than creating a set of characters, we can search for a character within a string. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-3-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Add some testsuite coverage to ensure future patches are on the right track: Our current C representation of qapi arrays is done by appending 'List' to the element name; but we are not preventing the creation of an object type with the same name. Add reserved-type-list.json to test this. Then rename enum-union-clash.json to reserved-type-kind.json to cover the reservation that we DO detect, and shorten it to match the fact that the name is reserved even if there is no clash. We are failing to detect a collision between a dictionary member and the implicit 'has_*' flag for another optional member. The easiest fix would be for a future patch to reserve the entire "has[-_]" namespace for member names (the collision is also possible for branch names within flat unions, but only as long as branch names can collide with (non-variant) members; however, since future patches are about to remove that, it is not worth testing here). Add reserved-member-has.json to test this. A similar collision exists between a dictionary member where c_name() munges what might otherwise be a reserved name to start with 'q_', and another member explicitly starts with "q[-_]". Again, the easiest solution for a future patch will be reserving the entire namespace, but here for commands as well as members. Add reserved-member-q.json and reserved-command-q.json to test this; separate tests since arguably our munging of command 'unix' to 'qmp_q_unix()' could be done without a q_, which is different than the munging of a member 'unix' to 'foo.q_unix'. Finally, our testsuite does not have any compilation coverage of struct inheritance with empty qapi structs. Update qapi-schema-test.json to test this. Note that there is currently no technical reason to forbid type name patterns from member names, or member name patterns from types, since the two are not in the same namespace in C and won't collide; but it's not worth adding positive tests of these corner cases at this time, especially while there is other churn pending in patches that rearrange which collisions actually happen. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-2-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Daniel P. Berrange 提交于
Revert the qapi-schema.json change done in: commit 0983f5e6 Author: Daniel P. Berrange <berrange@redhat.com> Date: Tue Sep 1 14:46:50 2015 +0100 sockets: allow port to be NULL when listening on IP address Switching "port" from mandatory to optional causes the QAPI code generator to add a 'has_port' field to the InetSocketAddress struct. No code that created InetSocketAddress objects was updated to set 'has_port = true', which caused the non-NULL port strings to be silently dropped when copying InetSocketAddress objects. Reported-by: NKnut Omang <knuto@ifi.uio.no> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1445509543-30679-1-git-send-email-berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 31 10月, 2015 2 次提交
-
-
由 Peter Maydell 提交于
# gpg: Signature made Thu 29 Oct 2015 18:09:16 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: block: Consider all child nodes in bdrv_requests_pending() target-arm: xlnx-zynqmp: Add sdhci support. sdhci: Split sdhci.h for public and internal device usage sd.h: Move sd.h to include/hw/sd/ virtio: sync the dataplane vring state to the virtqueue before virtio_save gdb command: qemu handlers virtio-blk: switch off scsi-passthrough by default ppc/spapr: add 2.4 compat props s390x: include HW_COMPAT_* props qemu-gdb: add $qemu_coroutine_sp and $qemu_coroutine_pc qemu-gdb: extract parts of "qemu coroutine" implementation qemu-gdb: allow using glibc_pointer_guard() on core dumps Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
MIPS patches 2015-10-30 Changes: * R6 CPU can be woken up by non-enabled interrupts * PC fix in KVM * Coprocessor 0 XContext calculation fix * various MIPS R6 updates # gpg: Signature made Fri 30 Oct 2015 14:51:56 GMT using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20151030: target-mips: fix updating XContext on mmu exception target-mips: add SIGRIE instruction target-mips: Set Config5.XNP for R6 cores target-mips: add PC, XNP reg numbers to RDHWR hw/mips_malta: Fix KVM PC initialisation target-mips: Add enum for BREAK32 target-mips: update writing to CP0.Status.KX/SX/UX in MIPS Release R6 target-mips: implement the CPU wake-up on non-enabled interrupts in R6 target-mips: move the test for enabled interrupts to a separate function Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 30 10月, 2015 21 次提交
-
-
由 Yongbok Kim 提交于
Correct updating XContext.Region field on mmu exceptions. If Config3.CTXTC = 0 then the R field of XContext has to be updated with the value of bits 63..62 of the virtual address upon a TLB exception. Also fixed the below line which overs 80 characters. Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
由 Yongbok Kim 提交于
Add SIGRIE (Signal Reserved Instruction Exception) for both MIPS and microMIPS. The instruction allows to use the 16-bit code field for software use. This instruction is introduced by and required as of Release 6. Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
由 Yongbok Kim 提交于
Set Config5.XNP for R6 cores to indicate the extended LL/SC family of instructions NOT present. Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
由 Yongbok Kim 提交于
Add Performance Counter (4) and XNP (5) register numbers to RDHWR. Add check_hwrena() to simplify access control checkings. Add RDHWR support to microMIPS R6. Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
由 James Hogan 提交于
Commit 71c199c8 ("mips_malta: provide ememsize env variable to kernels") changed the meaning of loaderparams.ram_size to be the whole of RAM rather than just the low part below where the boot code is placed for KVM, but it didn't update the PC initialisation for KVM to use ram_low_size. Fix that now. Fixes: 71c199c8 ("mips_malta: provide ememsize env variable to kernels") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
由 Peter Maydell 提交于
QMP and QObject patches # gpg: Signature made Fri 30 Oct 2015 08:06:26 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-monitor-2015-10-30: docs: Document QMP event rate limiting monitor: Throttle event VSERPORT_CHANGE separately by "id" monitor: Turn monitor_qapi_event_state[] into a hash table glib: add compatibility interface for g_hash_table_add() monitor: Split MonitorQAPIEventConf off MonitorQAPIEventState monitor: Switch from timer_new() to timer_new_ns() monitor: Simplify event throttling monitor: Reduce casting of QAPI event QDict qstring: Make conversion from QObject * accept null qlist: Make conversion from QObject * accept null qfloat qint: Make conversion from QObject * accept null qdict: Make conversion from QObject * accept null qbool: Make conversion from QObject * accept null qobject: Drop QObject_HEAD Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <1444921716-9511-8-git-send-email-armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Markus Armbruster 提交于
VSERPORT_CHANGE is emitted when the guest opens or closes a virtio-serial port. The event's member "id" identifies the port. When several events arrive quickly, throttling drops all but the last of them. Because of that, a QMP client must assume that *any* port may have changed state when it receives a VSERPORT_CHANGE event and throttling may have happened. Make the event more useful by throttling it for each port separately. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-7-git-send-email-armbru@redhat.com>
-
由 Markus Armbruster 提交于
In preparation of finer grained throttling. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <1444921716-9511-6-git-send-email-armbru@redhat.com>
-
由 Markus Armbruster 提交于
The next commit will use it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
The function manually recursed into bs->file and bs->backing to check whether there were any requests pending, but it ignored other children. There's no need to special case file and backing here, so just replace these two explicit recursions by a loop recursing for all child nodes. Reported-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Message-id: 1446029211-27148-1-git-send-email-kwolf@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Sai Pavan Boddu 提交于
Add two SYSBUS_SDHCI devices for xlnx-zynqmp Signed-off-by: NSai Pavan Boddu <saipava@xilinx.com> Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Sai Pavan Boddu 提交于
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and internal version (i.e hw/sd/sdhci-interna.h) based on register declarations and object declaration. Signed-off-by: NSai Pavan Boddu <saipava@xilinx.com> Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Sai Pavan Boddu 提交于
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: NSai Pavan Boddu <saipava@xilinx.com> Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Pavel Butsykin 提交于
When creating snapshot with the dataplane enabled, the snapshot file gets not the actual state of virtqueue, because the current state is stored in VirtIOBlockDataPlane. Therefore, before saving snapshot need to sync the dataplane vring state to the virtqueue. The dataplane will resume its work at the next notify virtqueue. When snapshot loads with loadvm we get a message: VQ 0 size 0x80 Guest index 0x15f5 inconsistent with Host index 0x0: delta 0x15f5 error while loading state for instance 0x0 of device '0000:00:08.0/virtio-blk' Error -1 while loading VM state to reproduce the error I used the following hmp commands: savevm snap1 loadvm snap1 qemu parameters: --enable-kvm -smp 4 -m 1024 -drive file=/var/lib/libvirt/images/centos6.4.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,id=virtio-disk0 -set device.virtio-disk0.x-data-plane=on Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Message-id: 1445859777-2982-1-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
A new gdb commands are added: qemu handlers That dumps an AioContext list (by default qemu_aio_context) possibly including a backtrace for cases it knows about (with the verbose option). Intended to help find why something is hanging waiting for IO. Use 'qemu handlers --verbose iohandler_ctx' to find out why your incoming migration is stuck. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1445951385-11924-1-git-send-email-dgilbert@redhat.com V2: Merge into one command with optional handlers arg, and only do backtrace in verbose mode (gdb) qemu handlers ---- {pfd = {fd = 6, events = 25, revents = 0}, io_read = 0x55869656ffd0 <event_notifier_dummy_cb>, io_write = 0x0, deleted = 0, opaque = 0x558698c4ce08, node = {le_next = 0x0, le_prev = 0x558698c4cdc0}} (gdb) qemu handlers iohandler_ctx ---- {pfd = {fd = 9, events = 25, revents = 0}, io_read = 0x558696581380 <fd_coroutine_enter>, io_write = 0x0, deleted = 0, opaque = 0x558698dc99d0, node = {le_next = 0x558698c4cca0, le_prev = 0x558698c4c1d0}} ---- {pfd = {fd = 4, events = 25, revents = 0}, io_read = 0x55869657b330 <sigfd_handler>, io_write = 0x0, deleted = 0, opaque = 0x4, node = {le_next = 0x558698c4c260, le_prev = 0x558699f72508}} ---- {pfd = {fd = 5, events = 25, revents = 0}, io_read = 0x55869656ffd0 <event_notifier_dummy_cb>, io_write = 0x0, deleted = 0, opaque = 0x558698c4c218, node = {le_next = 0x0, le_prev = 0x558698c4ccc8}} ---- (gdb) qemu handlers --verbose iohandler_ctx ---- {pfd = {fd = 9, events = 25, revents = 0}, io_read = 0x558696581380 <fd_coroutine_enter>, io_write = 0x0, deleted = 0, opaque = 0x558698dc99d0, node = {le_next = 0x558698c4cca0, le_prev = 0x558698c4c1d0}} #0 0x0000558696581820 in qemu_coroutine_switch (from_=from_@entry=0x558698cb3cf0, to_=to_@entry=0x7f421c37eac8, action=action@entry=COROUTINE_YIELD) at /home/dgilbert/git/qemu/coroutine-ucontext.c:177 #1 0x0000558696580c00 in qemu_coroutine_yield () at /home/dgilbert/git/qemu/qemu-coroutine.c:145 #2 0x00005586965814f5 in yield_until_fd_readable (fd=9) at /home/dgilbert/git/qemu/qemu-coroutine-io.c:90 #3 0x0000558696523937 in socket_get_buffer (opaque=0x55869a3dc620, buf=0x558698c505a0 "", pos=<optimized out>, size=32768) at /home/dgilbert/git/qemu/migration/qemu-file-unix.c:101 #4 0x0000558696521fac in qemu_fill_buffer (f=0x558698c50570) at /home/dgilbert/git/qemu/migration/qemu-file.c:227 #5 0x0000558696522989 in qemu_peek_byte (f=0x558698c50570, offset=0) at /home/dgilbert/git/qemu/migration/qemu-file.c:507 #6 0x0000558696522bf4 in qemu_get_be32 (f=0x558698c50570) at /home/dgilbert/git/qemu/migration/qemu-file.c:520 #7 0x0000558696522bf4 in qemu_get_be32 (f=f@entry=0x558698c50570) at /home/dgilbert/git/qemu/migration/qemu-file.c:604 #8 0x0000558696347e5c in qemu_loadvm_state (f=f@entry=0x558698c50570) at /home/dgilbert/git/qemu/migration/savevm.c:1821 #9 0x000055869651de8c in process_incoming_migration_co (opaque=0x558698c50570) at /home/dgilbert/git/qemu/migration/migration.c:336 #10 0x000055869658188a in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at /home/dgilbert/git/qemu/coroutine-ucontext.c:80 #11 0x00007f420f05df10 in __start_context () at /lib64/libc.so.6 #12 0x00007ffc40815f50 in () #13 0x0000000000000000 in () ---- Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Cornelia Huck 提交于
Devices that are compliant with virtio-1 do not support scsi passthrough any more (and it has not been a recommended setup anyway for quite some time). To avoid having to switch it off explicitly in newer qemus that turn on virtio-1 by default, let's switch the default to scsi=false for 2.5. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1444991154-79217-4-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Cornelia Huck 提交于
HW_COMPAT_2_4 will become non-empty: prepare for it. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1444991154-79217-3-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Cornelia Huck 提交于
We want to inherit generic hw compat as well. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-id: 1444991154-79217-2-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
These can be useful to manually get a stack trace of a coroutine inside a core dump. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1444636974-19950-4-git-send-email-pbonzini@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Provide useful Python functions to reach and decipher a jmpbuf. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1444636974-19950-3-git-send-email-pbonzini@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-