- 25 1月, 2017 1 次提交
-
-
由 Jianjun Duan 提交于
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: NJianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
- 21 12月, 2016 1 次提交
-
-
由 Thomas Huth 提交于
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: NThomas Huth <thuth@redhat.com>
-
- 28 10月, 2016 1 次提交
-
-
由 Anand J 提交于
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NAnand J <anand.indukala@gmail.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 12 7月, 2016 1 次提交
-
-
由 Paul Burton 提交于
ASID currently has uint8_t type which is too small since some processors support more than 8 bits ASID. Therefore change its type to uint16_t. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 19 5月, 2016 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Remove usage of NEED_CPU_H from hw/hw.h. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 30 3月, 2016 1 次提交
-
-
由 Yongbok Kim 提交于
The MAAR register is a read/write register included in Release 5 of the architecture that defines the accessibility attributes of physical address regions. In particular, MAAR defines whether an instruction fetch or data load can speculatively access a memory region within the physical address bounds specified by MAAR. As QEMU doesn't do speculative access, hence this patch only provides ability to access the registers. Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 23 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 28 7月, 2015 1 次提交
-
-
由 Leon Alrae 提交于
Reported-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 12 6月, 2015 2 次提交
-
-
由 Leon Alrae 提交于
CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Leon Alrae 提交于
Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32. Introduce gen_move_low32() function which moves low 32 bits from 64-bit temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on MIPS32. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 3月, 2015 2 次提交
-
-
由 Leon Alrae 提交于
Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore them in post_load() from the architectural registers. Float exception flags are not present in vmstate. Information they carry is used only by softfloat caller who translates them into MIPS FCSR.Cause, FCSR.Flags and then they are cleared. Therefore there is no need for saving them in vmstate. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Leon Alrae 提交于
Create VMStateDescription for MIPS CPU. The new structure contains exactly the same fields as before, therefore leaving existing version_id. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 13 2月, 2015 1 次提交
-
-
由 Leon Alrae 提交于
Recently added CP0.BadInstr and CP0.BadInstrP registers ended up in cpu_load() under different offset than in cpu_save(). These and all registers between were incorrectly restored. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
-
- 03 11月, 2014 1 次提交
-
-
由 Leon Alrae 提交于
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>
-
- 19 6月, 2014 1 次提交
-
-
由 Petar Jovanovic 提交于
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 14 3月, 2014 1 次提交
-
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 15 3月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 12月, 2011 1 次提交
-
-
由 Dong Xu Wang 提交于
Cc: Richard Henderson <rth@twiddle.net> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 27 6月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Most exec-all.h include directives are now useless, remove them. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 22 11月, 2009 1 次提交
-
-
由 Aurelien Jarno 提交于
The variable CP0_LLAddr represent the full lladdr, not the actual register value, which is only part of this value and depends on the CPU. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 13 6月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 21 5月, 2009 1 次提交
-
-
由 Anthony Liguori 提交于
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 3月, 2009 1 次提交
-
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6936 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 21 12月, 2008 1 次提交
-
-
由 ths 提交于
Signed-off-by: NThiemo Seufer <ths@networkno.de> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6112 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 13 12月, 2008 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 7月, 2008 1 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4851 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 04 5月, 2008 1 次提交
-
-
由 aurel32 提交于
(Glauber Costa) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4327 c046a42c-6fe2-441c-8c8c-71466251a162
-