Add function for checking whether current CPU support mca broadcast.
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When the following test case is injected with mce command, maybe user could not
get the expected result.
    DATA
               command cpu bank status             mcg_status  addr   misc
        (qemu) mce     1   1    0xbd00000000000000 0x05        0x1234 0x8c

    Expected Result
           panic type: "Fatal Machine check"

That is because each mce command can only inject the given cpu and could not
inject mce interrupt to other cpus. So user will get the following result:
    panic type: "Fatal machine check on current CPU"

"broadcast" option is used for injecting dummy data into other cpus. Injecting
mce with this option the expected result could be gotten.

Usage:
    Broadcast[on]
           command broadcast cpu bank status             mcg_status  addr   misc
    (qemu) mce     -b        1   1    0xbd00000000000000 0x05        0x1234 0x8c

    Broadcast[off]
           command cpu bank status             mcg_status  addr   misc
    (qemu) mce     1   1    0xbd00000000000000 0x05        0x1234 0x8c
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Clean up cpu_inject_x86_mce() for later patch.
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

simple cleanup and use existing helper: kvm_check_extension().
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Make use of the new KVM_NMI IOCTL to send NMIs into the KVM guest if the
user space raised them. (example: qemu monitor's "nmi" command)
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Change checkpatch.pl for QEMU use:
 - Root directory detection
 - Forbid tabs
 - Indent at 4 spaces
 - Allow typedefs
 - Enforce brace use even for single statement blocks
 - Don't suggest nonexistent cleanup tools

Mention the script in CODING_STYLE.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Unchanged import from
http://www.kernel.org/pub/linux/kernel/people/apw/checkpatch/checkpatch.pl-0.31Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move build and user scripts into scripts directory.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

isa_mem_base is computed from registers during reset, but due to QEMU
limitations some devices (e.g. VGA card) need to know it earlier when
they are registered.

Workaround this by setting the value during registration instead of
reset.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The PL190 implementation keeps the default vector address
in vect_addr[16], but we weren't using this for writes to
the DEFVECTADDR register. As a result of this fix the
default_addr structure member is unused and we can delete it.
Reported-by: NHimanshu Chauhan <hschauhan@nulltrace.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Some tests in FPU emulation code were wrongly using float64_is_nan()
before commit 18569871, and wrongly
using float64_is_quiet_nan() after. Fix them by using float64_is_any_nan()
instead.
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The current FPU code returns 0.0 if one of the operand is a
signaling NaN and the VXSNAN exception is disabled.

fload_invalid_op_excp() doesn't return a qNaN in case of a VXSNAN
exception as the operand should be propagated instead of a new
qNaN to be generated. Fix that by calling fload_invalid_op_excp()
only for the exception generation (if enabled), and use the softfloat
code to correctly compute the result.
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

use qemu_malloc() instead of direct use of malloc().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use pci_device_deassert_intx().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use pci_device_deassert_intx().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Recently PXA2xx lcd have stopped to be updated incrementally (picture
frozen). This patch fixes that by passing non min/max x/y, but rather
(correctly) x/y and w/h.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

vmstate_pxa2xx_i2c incorrectly recursed to itself instead of going
to store slave device. Fix that stop stop qemu from segfaulting
during savevm for pxa2xx-based devices.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Second instance of scoop contains registers shifted to 0x40 from the start
of the page. Instead of messing with register mapping, just limit register
address to 0x00..0x3f.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Mainstone board has two flash chips (emulated by two ram regions), however
currently code tries to allocate them with the same name, which fails.
Fix that to make mainstone emulation work again.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

I'm using the Qemu program with VNC I/O, and I had some problems with
my keyboard layout, so I've prepared a definition to be included in
Qemu, built from Xorg description.
Signed-off-by: NFrédéric Boiteux <fboiteux@free.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The indirection functions are empty since commit
8da3ff18.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When a modifier key is pressed or released, the USB HID keyboard still
answers NAK, unless another key is also pressed or released.

The patch fixes that by calling usb_hid_changed() when a modifier key
is pressed or released.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting
the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is
returning the correct value, and the other true for any kind of NaN.

This patch fixes that by applying the same kind of comparison as for
other float formats, but taking into account the explicit bit.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Use this for assignment to the low byte or low word of a register.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Load/store reversed (lwr/swr) are insns that endian translate
the sub-word part of the address and byteswap the data lanes.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>