1) compute path to i386 compiler from configure.  If it is found, run
the i386 tests.  I use macros so that this approach could be applied
for other arches as well.

2) provide an easily extensible way to add tests

Most tests fail, but at least "make test" does something meaningful.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

path.c grew quite a few new dependencies (mostly via cutils.c),
include them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Many other tests fail, but this has an infinite loop with both
qemu-i386 and native execution (albeit on x86_64), so there is
something more going on.  I'm not going to debug it now, so just
disable the test.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

RAM registration used incorrect offset.

Fix by using the offset obtained previously for this purpose.

Spotted by GCC 4.6.0 20100925 warning, which is also avoided.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Replace the remaining format attribute printf by macro
GCC_FMT_ATTR which uses gnu_printf (if supported).

v2
* Removal of dyngen specific code is now done in a separate patch.
* Handle attribute in new ui/spice-display.c, too.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The formerly used dyngen code did not work with
system include files like stdio.h.

Tests with Linux, OSX and Win32 show that this
restriction is no longer needed.

So we hopefully can remove that special piece of code.
This results in cleaner code and allows better use of
the new GCC_FMT_ATTR macro.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

control-{@[\]^_} shouldn't get the 'a' - 'A' offset for correct
translation. ESC is better simulated as escape key.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NAndrew Zaborowski <balrogg@gmail.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit 6389c45441269baa2873e6feafebd17105ddeaf6
Author: Jan Kiszka <jan.kiszka@siemens.com>
Date:   Mon Mar 1 18:17:26 2010 +0100

    qemu-kvm: Cleanup/fix TSC and PV clock writeback
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

And add kvm_has_msr_hsave_pa(), to avoid warnings on older
kernels without support.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit 2bba4446746add456ceeb0e8359a43032a2ea333
Author: Alexander Graf <agraf@suse.de>
Date:   Thu Dec 18 15:38:32 2008 +0100

    Enable nested SVM support in userspace
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch removes following warnings:

target-i386/kvm.c: In function 'kvm_put_msrs':
target-i386/kvm.c:782: error: unused variable 'i'
target-i386/kvm.c: In function 'kvm_get_msrs':
target-i386/kvm.c:1083: error: label at end of compound statement
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There is no reason why SRAO event received by the main thread
is the only one that being broadcasted.

According to the x86 ASDM vol.3A 15.10.4.1,
MCE signal is broadcast on processor version 06H_EH or later.

This change is required to handle SRAR in smp guests.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

And restruct this block to call kvm_mce_in_exception() only when it is
required.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

SCI is level triggered. pci hotplug should behave appropriately.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

From: Avi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Port qemu-kvm's

commit 1bab5d11545d8de5facf46c28630085a2f9651ae
Author: Huang Ying <ying.huang@intel.com>
Date:   Wed Mar 3 16:52:46 2010 +0800

    Add savevm/loadvm support for MCE

    MCE registers are saved/load into/from CPUState in
    kvm_arch_save/load_regs. To simulate the MCG_STATUS clearing upon
    reset, MSR_MCG_STATUS is set to 0 for KVM_PUT_RESET_STATE.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's

commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef
Author: Huang Ying <ying.huang@intel.com>
Date:   Mon Sep 21 10:43:25 2009 +0800

    MCE: Relay UCR MCE to guest

    UCR (uncorrected recovery) MCE is supported in recent Intel CPUs,
    where some hardware error such as some memory error can be reported
    without PCC (processor context corrupted). To recover from such MCE,
    the corresponding memory will be unmapped, and all processes accessing
    the memory will be killed via SIGBUS.

    For KVM, if QEMU/KVM is killed, all guest processes will be killed
    too. So we relay SIGBUS from host OS to guest system via a UCR MCE
    injection. Then guest OS can isolate corresponding memory and kill
    necessary guest processes only. SIGBUS sent to main thread (not VCPU
    threads) will be broadcast to all VCPU threads as UCR MCE.

aliguori: fix build
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In QEMU-KVM, physical address != RAM address. While MCE simulation
needs physical address instead of RAM address. So
kvm_physical_memory_addr_from_ram() is implemented to do the
conversion, and it is invoked before being filled in the IA32_MCi_ADDR
MSR.
Reported-by: NDean Nelson <dnelson@redhat.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

To be used by next patches.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's MCE support

commit c68b2374c9048812f488e00ffb95db66c0bc07a7
Author: Huang Ying <ying.huang@intel.com>
Date:   Mon Jul 20 10:00:53 2009 +0800

    Add MCE simulation support to qemu/kvm

    KVM ioctls are used to initialize MCE simulation and inject MCE. The
    real MCE simulation is implemented in Linux kernel. The Kernel part
    has been merged.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Block SIGALRM, SIGIO and consume them via signalfd.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's signalfd compat code.

commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5
Author: Anthony Liguori <aliguori@us.ibm.com>
Date:   Wed May 7 11:55:47 2008 -0500

    Use signalfd() in io-thread

    This patch reworks the IO thread to use signalfd() instead of sigtimedwait()
    This will eliminate the need to use SIGIO everywhere.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the svm cpuid feature flags to the qemu
intialization path. It also adds the svm features available
on phenom to its cpu-definition and extends the host cpu
type to support all svm features KVM can provide.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch cleans the (stack-allocated) cpuid definition to
0 before actually initializing it.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

-Wall enables a bunch of warnings at once.  configure puts it after
$gcc_flags.  This makes it impossible to disable warnings enabled by
-Wall there.  Fix by putting configured flags last.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When qemu is configured with --enable-debug-tcg,
gcc throws this warning (or error with -Werror):

tcg/tcg.c:1030: error: comparison of unsigned expression >= 0 is always true

Fix it by removing the >= 0 part.
The type cast to 'unsigned' catches negative values of op
(which should never happen).

This is a modification of Hollis Blanchard's patch.

Cc: Hollis Blanchard <hollis@penguinppc.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so
it actually receives events.  Also make sure we only remove the handler
if we registered it before.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch updates the vmmouse handler registration and activation.

Old behavior:
  vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute
  unregister the handler and re-register it.

New behavior:
  vmmouse_request_relative and vmmouse_request_absolute will unregister
  the handler in case the mode did change.  Then register and active the
  handler with current mode if needed.

Note that the old code never ever *activates* the handler, so the
vmmouse doesn't receive events.  This trips up Fedora 14 for example:
Boot a default install without usb tablet, watch the X-Server activating
the vmmouse then, enjoy a non-functional mouse.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

readv & writev, read & write respectively from the current offset
of the file & hence their use has to be preceeded by a call to lseek.
preadv/writev can be used instead, as they take the offset as an argument.
This saves one system call( lseek ).
In case preadv is not supported, it is implemented by an lseek
followed by a readv. Depending upon the configuration of QEMU, the
appropriate read & write methods are selected. This patch also fixes the
zero byte read/write bug & obviates the need to apply a fix for that bug separately.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NSanchit Garg <sancgarg@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

We would need this to make sure we handle the mapped
security model correctly for different xattr names.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

The O_DIRECT flag imposes alignment restrictions on the length and address
of userspace buffers and the file offset of I/Os.

While VirtFS/9P has plans to implement O_DIRECT behavior on the server,
for now we will stick to a behavior like NFS by bypassing the page cache
only on the client. Server may still cache the I/O.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>