The multiboot spec (https://www.gnu.org/software/grub/manual/multiboot/),
section 3.1.3, allows for bss_end_addr to be zero.

A zero bss_end_addr signifies there is no .bss section.
Suggested-by: NDaniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: NJack Schwartz <jack.schwartz@oracle.com>
Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: NPrasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Automatic creation of SCSI controllers for "-drive if=scsi" for x86
machines was quite a bad idea (see description of commit f778a82f
for details). This is marked as deprecated since QEMU v2.9.0, and as
far as I know, nobody complained that this is still urgently required
anymore. Time to remove this now.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1519123357-13225-1-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The previous commit improved compile time by including less of the
generated QAPI headers.  This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.

Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.

It's possible everywhere, except:

* monitor.c needs qmp-command.h to get qmp_init_marshal()

* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
  qapi-event.h to get enum QAPIEvent

Perhaps we'll get rid of those some other day.

Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: NEric Blake <eblake@redhat.com>

In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: NEric Blake <eblake@redhat.com>

Xen is doing this [1] and currently triggers an abort.

[1] http://xenbits.xenproject.org/gitweb/?p=xen.git;a=blob;f=xen/drivers/passthrough/vtd/iommu.c;h=daaed0abbdd06b6ba3d948ea103aadf02651e83c;hb=refs/heads/master#l1108Reported-by: NLuis Lloret <luis_lloret@mentor.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a in block/nvme.c resolved]

The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile.  We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h.  Works,
because we include those wherever the macros get used.

Open-coding these helpers is of dubious value.  Turn them into
functions and drop the includes from the headers.

This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree.  For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>

This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e9 resolved, OSX breakage fixed]

changes generated using the following Coccinelle patch:

  @@
  type DeviceParentClass;
  DeviceParentClass *pc;
  DeviceClass *dc;
  identifier parent_fn;
  identifier child_fn;
  @@
  (
  +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->realize;
  ...
  -dc->realize = child_fn;
  |
  +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->unrealize;
  ...
  -dc->unrealize = child_fn;
  |
  +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->reset;
  ...
  -dc->reset = child_fn;
  )
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180114020412.26160-4-f4bug@amsat.org>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.

The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.

The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)

Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.

Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.

Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.

* for SPAPR it will be a spapr core type and for ARM/s390x/x86
  a respective descendant of CPUClass.

Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The only user-creatable sysbus devices in qemu-system-x86_64 are
amd-iommu, intel-iommu, and xen-backend.  xen-backend is handled
by xen_set_dynamic_sysbus(), so we only need to add amd-iommu and
intel-iommu.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-7-ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The existing has_dynamic_sysbus flag makes the machine accept
every user-creatable sysbus device type on the command-line.
Replace it with a list of allowed device types, so machines can
easily accept some sysbus devices while rejecting others.

To keep exactly the same behavior as before, the existing
has_dynamic_sysbus=true assignments are replaced with a
TYPE_SYS_BUS_DEVICE entry on the allowed list.  Other patches
will replace the TYPE_SYS_BUS_DEVICE entries with more specific
lists of devices.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171125151610.20547-2-ehabkost@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Starting qemu with
qemu-system-x86_64 -S -M isapc -device {amd|intel}-iommu
leads to a segfault. The code assume PCI bus is present and
tries to access the bus structure without checking.

Since Intel VT-d and AMDVI should only work with PCI, add a
check for PCI bus and return error if not present.
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMohammed Gamal <mgamal@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Instead of having the same error checks in vtd_realize()
and amdvi_realize(), move that over to the generic
x86_iommu_realize().
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMohammed Gamal <mgamal@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

It may be hard to read the assignment statement of "next_base", so

S/next_base += (1ULL << 32) - pcms->below_4g_mem_size;
 /next_base = mem_base + mem_len;

... for readability.

No functionality change.
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The current implementation of Intel IOMMU code only supports 39 bits
iova address width. This patch provides a new parameter (x-aw-bits)
for intel-iommu to extend its address width to 48 bits but keeping the
default the same (39 bits). The reason for not changing the default
is to avoid potential compatibility problems with live migration of
intel-iommu enabled QEMU guest. The only valid values for 'x-aw-bits'
parameter are 39 and 48.

After enabling larger address width (48), we should be able to map
larger iova addresses in the guest. For example, a QEMU guest that
is configured with large memory ( >=1TB ). To check whether 48 bits
aw is enabled, we can grep in the guest dmesg output with line:
"DMAR: Host address width 48".
Signed-off-by: NPrasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The current implementation of Intel IOMMU code only supports 39 bits
host/iova address width so number of macros use hard coded values based
on that. This patch is to redefine them so they can be used with
variable address widths. This patch doesn't add any new functionality
but enables adding support for 48 bit address width.
Signed-off-by: NPrasad Singamsetty <prasad.singamsety@oracle.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171219033730.12748-2-haozhong.zhang@intel.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

When -no-acpi option is used with Q35 machine type, no guest ACPI is
built, but the ACPI device is still created, so only checking the
presence of ACPI device before memory plug/unplug is not enough in
such cases. Check whether ACPI is disabled globally in addition and
fail memory plug/unplug if it's disabled.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171222015120.31730-1-haozhong.zhang@intel.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

More recent specs of the TPM2 ACPI table add fields for the log area
start address and the log area minimum size, which we already use
for the TCPA table.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

It should be caching-mode.  It may confuse people when it pops up.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLiu, Yi L <yi.l.liu@intel.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We have PCI_DEVFN_MAX now.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NLiu, Yi L <yi.l.liu@intel.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When compiled with anything other than the 'log' trace backend, we have:

   error: implicit declaration of function 'qemu_log_mask'
   error: 'LOG_UNIMP' undeclared (first use in this function)

This patch adds the missing include.

Fixes: 7299e1a4
       ("hw/i386/vmport: replace fprintf() by trace events or LOG_UNIMP")
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171221211103.30311-1-laurent@vivier.eu
[PMM: fixed commit message description of when problem occurs]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now both classes (i8259, i8259-kvm) support this.  Move this upper to
the common class code.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-6-peterx@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let's leverage the i8259 common code for kvm-i8259 too.

I think it's still possible that stats can lost when i8259 is in kernel
and meanwhile when irqfd is used, e.g., by vfio or vhost devices.
However that should be rare IMHO since they should be using MSIs mostly
if they really want performance (that's why people use vhost and device
assignment), and no old INTx should be used.  As long as the INTx users
are emulated in QEMU the stats will be correct.

For "info pic", it should be always accurate since we fetch kvm regs
before dump.

More importantly, it's just too simple to do this now - it's only 10+
LOC to gain this feature.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20171210063819.14892-5-peterx@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171215034356.4449-2-f4bug@amsat.org>
[Replace unknown command tracepoint with LOG_UNIMP, add
 generic tracepoint for vmport commands. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

It's a x86-only device, so it does not make sense to keep it
in the shared misc folder.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

and remove the old i386/pc dependency.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

- add "hw/net/ne2000-isa.h"
- remove the old i386 dependency
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NHervé Poussineau <hpoussin@reactos.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [PPC]
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NHervé Poussineau <hpoussin@reactos.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

and remove the old i386/pc dependency
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAnthony PERARD <anthony.perard@citrix.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

instead move them to the source file
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMichael McConville <mmcco@mykolab.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The device should be exposed if present. It shouldn't have an
undefined version (or else backend init failed, and device should fail
too). Finally, make the fields specific to TIS device model.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This will allow to introduce new devices implementing TPM.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

pci_find_primary_bus() only has one user, in pc_xen_hvm_init().  That's
inside the machine construction code, so it already has easy access to the
machine's primary PCI bus.

Get it directly, and thereby remove pci_find_primary_bus().  This removes
one of only a handful of users of the ugly pci_host_bridges global.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>

The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.

Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>