s390x introduced helper functions for getting/setting one_regs with
commit 860643bc. However, nothing about these is s390-specific.

Alexey Kardashevskiy had already posted a general version, so let's
merge the two patches and massage the code a bit.

CC: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPeter Wu <peter@lekensteyn.nl>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Some ONE_REGS on s390 are not protected by a capability. Older kernels
might not provide those and return an error. Fortunately these registers
are only critical for the migration path. There is no need to error out
on reset and normal runtime. Furthermore, these kernels don't provide
a proper dirty bitmap anyway, so let's use tracing for those errors.

Also provide generic one reg helper to simplify the code.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Implementation of a USB Media Transfer Device device for easy
filesharing.  Read-only.  No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This replaces DPRINTF macro with tracepoints.

This moves some messages from migration.c to savevm.c.

This adds tracepoint to signal about fileds failed to migrate.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

The throttling delay calculation was using an inaccurate sector count to
calculate the time to sleep.  This broke rate-limiting for the block
mirror job.

Move the delay calculation into mirror_iteration() where we know how
many sectors were transferred.  This lets us calculate an accurate delay
time.
Reported-by: NJoaquim Barrera <jbarrera@ac.upc.edu>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

It might be useful for tracing migration.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch introduces the hypervisor call H_GET_TCE which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).

The hcall H_GET_TCE is required by the kdump kernel which is calling it to
retrieve the TCE set up by the panicing kernel.
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

PR KVM lacks support of many SPRs in set/get one register API but it does
really break PR KVM. So convert them to switchable traces for now.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduces two simple functions:
    int kvm_device_ioctl(int fd, int type, ...);
    int kvm_create_device(KVMState *s, uint64_t type, bool test);

These functions wrap the basic ioctl-based interactions with KVM in a
way similar to other KVM ioctl wrappers.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s/offet/offset/
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.

The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:

./qemu-img create -f qcow2 \
  -o 'cluster_size=131072,preallocation=metadata' file.img 4G
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for special usb descriptors used by microsoft
windows.  They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.

As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Writing zeroes to a file can be done by punching a hole if
MAY_UNMAP is set.

Note that in this case ENOTSUP is not ignored, but makes
the block layer fall back to the generic implementation.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This will be used by the SCSI layer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit b5613fdc neglected to drop the trace events along with the code.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Update portsc register and raise irq in case a suspended
port is woken up, so remote wakeup works on our ehci ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.

This changes the request type format from %d to %x.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Event qxl_render_blit_guest_primary_initialized is unused since commit
c58c7b95, drop it.

Commit 42e5b4c9 moved hw/ppc/xics.c to hw/intc/xics.c without updating
the comment in trace-events.

"scripts/cleanup-trace-events.pl trace-events | diff trace-events" is
now clean again.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.

This changes the request type format from %d to %x.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This converts old style fprintf to traces.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[agraf: change patch subject]
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds pci_cfg_read and pci_cfg_write traces for config spaces
accesses.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is quite handy to debug softmmu targets.
Reviewed-by: NAndreas Faerber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1375016242-32651-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

They're all wrong since (at least) Paolo's big source tree
reorganization.  Need to shuffle some event declarations around to
keep them under the correct source file comment.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Dropped event                           Unused since
mirror_cow                              884fea4e
paio_complete                           47e6b251
paio_cancel                             47e6b251
usb_ehci_data                           0ce668bc
megasas_qf_dequeue                      never used
megasas_handle_frame                    never used
megasas_io_continue                     never used
megasas_iovec_map_failed                never used
megasas_dcmd_map_failed                 never used
milkymist_softusb_mouse_event           4c15ba9c
xen_map_block                           6506e4f9
xen_unmap_block                         6506e4f9
qemu_spice_start                        67be6726
qemu_spice_stop                         67be6726Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If a user chooses to turn on the auto-converge migration capability
these changes detect the lack of convergence and throttle down the
guest. i.e. force the VCPUs out of the guest for some duration
and let the migration thread catchup and help converge.

Verified the convergence using the following :
 - Java Warehouse workload running on a 20VCPU/256G guest(~80% busy)
 - OLTP like workload running on a 80VCPU/512G guest (~80% busy)

Sample results with Java warehouse workload : (migrate speed set to 20Gb and
migrate downtime set to 4seconds).

 (qemu) info migrate
 capabilities: xbzrle: off auto-converge: off  <----
 Migration status: active
 total time: 1487503 milliseconds
 expected downtime: 519 milliseconds
 transferred ram: 383749347 kbytes
 remaining ram: 2753372 kbytes
 total ram: 268444224 kbytes
 duplicate: 65461532 pages
 skipped: 64901568 pages
 normal: 95750218 pages
 normal bytes: 383000872 kbytes
 dirty pages rate: 67551 pages

 ---

 (qemu) info migrate
 capabilities: xbzrle: off auto-converge: on   <----
 Migration status: completed
 total time: 241161 milliseconds
 downtime: 6373 milliseconds
 transferred ram: 28235307 kbytes
 remaining ram: 0 kbytes
 total ram: 268444224 kbytes
 duplicate: 64946416 pages
 skipped: 64903523 pages
 normal: 7044971 pages
 normal bytes: 28179884 kbytes
Signed-off-by: NChegu Vinod <chegu_vinod@hp.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>