Commit ec229bbe7 broke invocation without a specific -hda.  IOW, qemu foo.img.
The lack of an optind update caused an infinite loop.
Reported-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Buffer block writes to avoid flushing every word access onto backing
storage device. This significantly speeds up flash emulation for flashes
connected through an 8 or 16-bit bus combined with backing storage (-pflash).
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests.  The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval.  The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure.  This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host.  A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Qemu has a number of commands that can operate asynchronously (savevm, migrate,
etc) and it will be getting more.  For these commands, the user monitor needs
to be suspended, but QMP monitors could continue to to accept other commands.
This patch introduces a new command API that isolates the details of handling
different monitor types from the actual command execution.

A monitor command can use this API by implementing the mhandler.cmd_async
handler (or info_async if appropriate).  This function is responsible for
submitting the command and does not return any data although it may raise
errors.  When the command completes, the QMPCompletion callback should be
invoked with its opaque data and the command result.

The process for submitting and completing an asynchronous command is different
for QMP and user monitors.  A user monitor must be suspended at submit time and
resumed at completion time.  The user_print() function must be passed to the
QMPCompletion callback so the result can be displayed properly.  QMP monitors
are simpler.  No submit time setup is required.  When the command completes,
monitor_protocol_emitter() writes the result in JSON format.

This API can also be used to implement synchronous commands.  In this case, the
cmd_async handler should immediately call the QMPCompletion callback.  It is my
hope that this new interface will work for all commands, leading to a
drastically simplified monitor.c once all commands are ported.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we go over the maximum number of iovecs support by syscall we get
back EINVAL from the kernel which translate to I/O errors for the guest.

Add a MAX_IOV defintion for platforms that don't have it.  For now we use
the same 1024 define that's used on Linux and various other platforms,
but until the windows block backend implements some kind of vectored I/O
it doesn't matter.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hi all,
this patch fixes another bug in vnc_refresh: calling vnc_update_client
might cause vs to be free()ed, in this case we cannot access vs->next
right after to examine the next item on the list.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This shouldn't happen under any normal circumstances. However, it looks like
it's possible to achieve this with corrupted images. Without this patch
raw_pread is hanging in an endless loop in such cases.

The patch is not affecting growable files, for which such reads happen in
normal use cases. raw_pread_aligned already handles these cases and won't
return zero in the first place.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Win32 suffers from a very big memory leak when dealing with SCSI devices.
Each read/write request allocates memory with qemu_memalign (ie
VirtualAlloc) but frees it with qemu_free (ie free).
Pair all qemu_memalign() calls with qemu_vfree() to prevent such leaks.
Signed-off-by: NHerve Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Toggle full screen on Win32/SDL 1.2.13 was broken by commit
c18a2c36. Re-add the call to
do_sdl_resize() which was removed in this revision
Signed-off-by: NHerve Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Aborting without an error message when memory is short
is not helpful, so print the reason for the abort.

Try
	qemu -m 1000000
or
	qemu -m 2000 (win32)

to force an out-of-memory error.

v2:
* Fix error message for win32.
* Fix error message for posix_memalign.

Thanks to malc for the hints.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

PCI bridges' qdev info structures must indicate bridge header type,
otherwise critical bridge registers (esp. PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

savevm without id or tag segfaults in:

(gdb) bt
#0  0x00007f600a83bf8a in __strcmp_sse42 () from /lib64/libc.so.6
#1  0x00000000004745b6 in bdrv_snapshot_find (bs=<value optimized out>,
    sn_info=0x7fff996be280, name=0x0) at savevm.c:1631
#2  0x0000000000475c80 in del_existing_snapshots (name=<value optimized out>,
    mon=<value optimized out>) at savevm.c:1654
#3  do_savevm (name=<value optimized out>, mon=<value optimized out>)
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The n member is not very descriptive and very hard to grep, rename it to
cur_nr_sectors to better indicate what it is used for.  Also rename
nb_sectors to remaining_sectors as that is what it is used for.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The BDRV_O_CREAT option is unused inside qemu and partially duplicates
the bdrv_create method.  Remove it, and the -C option to qemu-io which
isn't used in qemu-iotests anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Check the whitelist as early as possible instead of continuing the
setup, and move all the error handling code to the end of the
function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These hunks got dropped off mysteriously during the rebasing of my
virtio-serial series. Thanks go to Markus for noticing it.

Without these fixes, -virtioconsole doesn't actually have any effect.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This file was renamed to ease the reviews of the recent changes
that went in.

Now that the changes are done, rename the file back to its original
name.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch improves Anthony patch a6a853c8

Once there, it improves handling of object files for qemu tools

cc: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If migration takes place between write of the bmdma address register and
write of the command register (to initiate DMA), the destination will
not properly start the DMA op, hanging the guest:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd c8/00:16:41:00:00/00:00:00:00:00/e0 tag 0 dma 11264 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }

Fix by sending current transfer information in the migration data.

We need to update ide version to 4 for this to work.  As we don't
have subsectios, we need to chain the update increase until
vmstate_ide_pci (quintela)
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit completes the do_pci_info() conversion to
QObject by adding support to PCI bridge devices.

This is done by recursively adding devices in the
"pci_bridge" key.

IMPORTANT: This code is being added separately because I could
NOT test it properly. According to Michael Tsirkin, it depends
on ultrasparc and it would take time to do the proper setup.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.

As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.

IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A helper to retrieve a QDict from a QDict.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Iterate over QList entries, it's needed to call qlist_entry_obj()
to retrieve the stored QObject.

I'm not sure if it's ok to have this, because it's not as easy as
qlist_iter() and the QListEntry data type is now exposed to the
users, which means we have one more struct to be maintained when
we have libqmp.

Adding anyway, as it's more compact and people are asking for it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Found some places that seems needs this explicitly, now that
read-write is not the default.
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some more command line options had entries for command line help,
but documentation for texi and derived formats (man, html, info)
was missing.

For conditional options, the texi documentation was added
unconditionally.

This seems reasonable because typically man pages are
shared, and html users expect to see one documentation
(not several nearly identical documents for the different
systems).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Fix column for help text.

* Give some more help, especially for the new '?' parameters.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When called with property value "?",
a help text will be printed (instead of an error message).

This is useful for command lines like
    	qemu -device e1000,mac=?
and is already standard for other command line options.

A better help text could be provided by extending
the Property structure with a desc field.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When called with property "?", a list of supported
properties will be printed (instead of an error message).

This is useful for command lines like
	qemu -device e1000,?
and was already standard for other options like model=?
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

_FORTIFY_SOURCE is a Glibc feature which adds memory and string function
protection.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    i386-linux-user/mmap.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap':
/usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result
make[1]: *** [mmap.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    i386-softmmu/monitor.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make[1]: *** [monitor.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    i386-softmmu/vl.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'qemu_event_increment':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:3404: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'main':
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:5774: error: ignoring return value of 'write', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6064: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6083: error: ignoring return value of 'chdir', declared with attribute warn_unused_result
make[1]: *** [vl.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    usb-linux.o
cc1: warnings being treated as errors
usb-linux.c: In function 'usb_host_read_file':
usb-linux.c:1204: error: ignoring return value of 'fgets', declared with attribute warn_unused_result
make: *** [usb-linux.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    net/slirp.o
cc1: warnings being treated as errors
net/slirp.c: In function 'slirp_smb_cleanup':
net/slirp.c:470: error: ignoring return value of 'system', declared with attribute warn_unused_result
make: *** [net/slirp.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CC    block/qcow2.o
cc1: warnings being treated as errors
block/qcow2.c: In function 'qcow_create2':
block/qcow2.c:829: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:838: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:839: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:841: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:844: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:849: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:852: error: ignoring return value of 'write', declared with attribute warn_unused_result
block/qcow2.c:855: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [block/qcow2.o] Error 1
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>