'hotplugged' propperty is meant to be used on migration side when migrating
source with hotplugged devices.
However though it not exacly correct usage of 'hotplugged' property
it's possible to set generic hotplugged property for CPU using
 -cpu foo,hotplugged=on
or
 -global foo.hotplugged=on

in this case qemu crashes with following backtrace:

...

because pc_cpu_plug() assumes that hotplugged CPU could appear only after
rtc/fw_cfg are initialized.
Fix crash by replacing assumption with explicit checks of rtc/fw_cfg
and updating them only if they were initialized.

Cc: qemu-stable@nongnu.org
Reported-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <1483108391-199542-1-git-send-email-imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This has a single function, just move it to the other target/*/kvm.c files.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No need to provide this knob, so remove it and stubs/migration-colo.c.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the useless is_external argument.  Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it.  This lets us remove stubs/iohandler.c.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No need to include them in libqemustub.a, since only system emulators
need them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It makes little sense to implement only one of them, so avoid
proliferation of stubs files.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some stubs are used for user-mode emulation only; they are not
needed by tools.  Move them out of stubs/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

They are small, it is not worth stubbing them.  Just include them
in user-mode emulators and unit tests as well.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No need to include them in libqemustub.a, since only system emulators
need them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No need to include them in libqemustub.a, since only system emulators
need them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

monitor_cur_is_qmp was previously used by other stubs, but it's not
since 397d30e9 ("qemu-error: remove dependency of stubs on monitor",
2016-11-01).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.

Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

"qom-list-types abstract=false" currently returns all interface
types, as if they were not abstract. Fix this by making sure all
interface types are abstract.

All interface types have instance_size == 0, so we can use
it to set abstract=true on type_initialize().
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1481567461-2341-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the guest sets the sglist size to a value >=2GB, megasas_handle_dcmd
will return MFI_STAT_MEMORY_NOT_AVAILABLE without freeing the memory.
Avoid this by returning only the status from map_dcmd, and loading
cmd->iov_size in the caller.
Reported-by: NLi Qiang <liqiang6-s@360.cn>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

reset mc146818rtc device when RESET event happens.

Fix the problem:
  1. Guest boot the second cpu, set CMOS_RESET_CODE 0x0a to protect selfboot;
  2. VM being reset by others, hmp_system_reset;
  3. seabios resume check the CMOS_RESET_CODE, if 0x0a, jump to the BDA
     resume execution by jump via 40h:0067h;
  4. Guest halt;
Signed-off-by: Nhangaohuai <hangaohuai@huawei.com>
Message-Id: <20161219060336.10176-1-hangaohuai@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

# gpg: Signature made Sat 14 Jan 2017 09:06:31 GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-2.9-pull-request:
  target-m68k: increment/decrement with SP
  target-m68k: CAS doesn't need aligned access
  target-m68k: manage pre-dec et post-inc in CAS
  target-m68k: fix gen_flush_flags()
  target-m68k: fix bit operation with immediate value
  m68k: Remove PCI and USB from config file
  target-m68k: Implement bfffo
  target-m68k: Implement bitfield ops for memory
  target-m68k: Implement bitfield ops for registers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fixes and more queued patches

# gpg: Signature made Fri 13 Jan 2017 20:00:53 GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20170113:
  tcg/aarch64: Fix tcg_out_movi
  tcg/aarch64: Fix addsub2 for 0+C
  target/arm: Fix ubfx et al for aarch64
  tcg/s390: Fix merge error with facilities
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On 680x0 family only.

Address Register indirect With postincrement:

When using the stack pointer (A7) with byte size data, the register
is incremented by two.

Address Register indirect With predecrement:

When using the stack pointer (A7) with byte size data, the register
is decremented by two.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <huth@tuxfamily.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-6-git-send-email-laurent@vivier.eu>

Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-5-git-send-email-laurent@vivier.eu>

In these cases we must update the address register after
the operation.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-4-git-send-email-laurent@vivier.eu>

gen_flush_flags() is setting unconditionally cc_op_synced to 1
and s->cc_op to CC_OP_FLAGS, whereas env->cc_op can be set
to something else by a previous tcg fragment.

We fix that by not setting cc_op_synced to 1
(except for gen_helper_flush_flags() that updates env->cc_op)

FIX: https://github.com/vivier/qemu-m68k/issues/19Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-3-git-send-email-laurent@vivier.eu>

M680x0 bit operations with an immediate value use 9 bits of the 16bit
value, while coldfire ones use only 8 bits.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-2-git-send-email-laurent@vivier.eu>

None of the ColdFire boards that we currently support has a PCI or
USB bus (and AFAIK the upcoming q800 machine does not support PCI
and USB either), so we do not need these settings the config file.
Signed-off-by: NThomas Huth <huth@tuxfamily.org>
Message-Id: <20170106083956.53d08923@thl530>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1479242669-25852-1-git-send-email-rth@twiddle.net>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1478699171-10637-6-git-send-email-rth@twiddle.net>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1478699171-10637-5-git-send-email-rth@twiddle.net>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

There were some patterns, like 0x0000_ffff_ffff_00ff, for which we
would select to begin a multi-insn sequence with MOVN, but would
fail to set the 0x0000 lane back from 0xffff.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-3-rth@twiddle.net>

When al == xzr, we cannot use addi/subi because that encodes xsp.
Force a zero into the temp register for that (rare) case.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-2-rth@twiddle.net>

The patch in 59a71b4c suffered from a merge failure
when compared to the original patch in

  http://lists.nongnu.org/archive/html/qemu-devel/2016-12/msg00137.htmlSigned-off-by: NRichard Henderson <rth@twiddle.net>

The variable was renamed s390_facilities.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

x86 and machine queue, 2017-01-17

Includes i386, CPU, NUMA, and memory backends changes.

i386:
 target/i386: Fix bad patch application to translate.c

CPU:
 qmp: Report QOM type name on query-cpu-definitions

NUMA:
 numa: make -numa parser dynamically allocate CPUs masks

Memory backends:
 qom: remove unused header
 monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
 monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends

# gpg: Signature made Thu 12 Jan 2017 17:53:11 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request:
  qmp: Report QOM type name on query-cpu-definitions
  numa: make -numa parser dynamically allocate CPUs masks
  target/i386: Fix bad patch application to translate.c
  monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends
  monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
  qom: remove unused header
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A couple of fixes to reduce the matrix some more that just missed the
last iteration.

# gpg: Signature made Thu 12 Jan 2017 13:01:49 GMT
# gpg:                using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-travis-20170112-1:
  travis: add Trusty with clang stable build
  travis: trim out most clang builds
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Stefan Weil <sw@weilnetz.de>
Cc: Samuel Thibault <samuel.thibault@gnu.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1484295285-8809-1-git-send-email-kraxel@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

TriCore FPU patches

# gpg: Signature made Wed 11 Jan 2017 13:40:11 GMT
# gpg:                using RSA key 0x0AD2C6396B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E  6E37 0AD2 C639 6B69 CA14

* remotes/bkoppelmann/tags/pull-tricore-2017-01-11-2:
  target-tricore: Add updfl instruction
  target-tricore: Added new JNE instruction variant
  target-tricore: Added new MOV instruction variant
  target-tricore: Added MADD.F and MSUB.F instructions
  target-tricore: Added FTOUZ instruction
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: fixes for virtio-gpu and cirrus.

# gpg: Signature made Wed 11 Jan 2017 10:24:24 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vga-20170111-1:
  virtio-gpu: tag as not hotpluggable
  virtio-gpu: Fix memory leak in virtio_gpu_load()
  virtio-gpu: Recalculate VirtIOGPU::hostmem on VM load
  display: cirrus: ignore source pitch value as needed in blit_is_unsafe
  virtio-gpu: fix information leak in capset get dispatch
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The new typename attribute on query-cpu-definitions will be used
to help management software use device-list-properties to check
which properties can be set using -cpu or -global for the CPU
model.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1479320499-29818-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

so it won't impose an additional limits on max_cpus limits
supported by different targets.

It removes global MAX_CPUMASK_BITS constant and need to
bump it up whenever max_cpus is being increased for
a target above MAX_CPUMASK_BITS value.

Use runtime max_cpus value instead to allocate sufficiently
sized node_cpu bitmasks in numa parser.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <1479466974-249781-1-git-send-email-imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added asserts to ensure cpu_index < max_cpus]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

In commit c52ab08a,
the patch snippet for the "syscall" insn got applied to "iret".
Signed-off-by: NDoug Evans <dje@google.com>
Message-Id: <f403045cde4049058c05446d5c04@google.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>