Commit 31d2dda3 ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr.  However, the variables were never removed.
Do it now.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: NThomas Huth <thuth@redhat.com>

GNU make is perfectly happy to use 'check-FOO-y += bar' to
initialize check-FOO-y.  (GNU Automake strictly insists that
you cannot use += until after an initial = per variable, but
thankfully we aren't using automake).

As we have had more than one instance where copy-and-paste of
'check-FOO-y = bar' from a first test under category FOO into
an additional test, which ends up disabling the first (see
commits 992159c7 and 4429532b), it's better to just always use
the form that survives copy-and-paste, even for categories that
don't currently add more than one test.

Done with s/^\(check-[a-z]*-y \)=/\1+=/g
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

We can re-use the s390-ccw bios code to implement a small firmware
for a s390x guest which prints out the "A" and "B" characters and
modifies the memory, as required for the migration test.

[quintela: Converted the compile script to Makefile rules]
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up Makefile since the aarch patch sneaked in first

This patch adds migration test support for aarch64. The test code, which
implements the same functionality as x86, is booted as a kernel in qemu.
Here are the design choices we make for aarch64:

 * We choose this -kernel approach because aarch64 QEMU doesn't provide a
   built-in fw like x86 does. So instead of relying on a boot loader, we
   use -kernel approach for aarch64.
 * The serial output is sent to PL011 directly.
 * The physical memory base for mach-virt machine is 0x40000000. We change
   the start_address and end_address for aarch64.

In addition to providing the binary, this patch also includes the source
code and the build script in tests/migration/aarch64. So users can change
the source and/or re-compile the binary as they wish.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NWei Huang <wei@redhat.com>
Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Commit 0bcc8e5b accidentally dropped check-qdict from the list of
unit tests (again, see commit 4429532b).  Put it back, and fix up
the test.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180926122309.30631-1-armbru@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

By leveraging berkeley's softfloat and testfloat.

With this we get decent coverage of softfloat.c:

$ ./fp-test -r even:	67.22% coverage
$ ./fp-test -r all:	73.11% coverage

Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:

- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: NEmilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

- With CONFIG_ATOMIC64:
$ tests/atomic64-bench  -n 1
 Throughput:         310.40 Mops/s

- Without:
$ tests/atomic64-bench  -n 1
 Throughput:         149.08 Mops/s
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-4-cota@braap.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 7a066770.

The patch did not work as expected: The vmxnet3 test is currently
not run at all anymore.
Signed-off-by: NThomas Huth <thuth@redhat.com>

This reverts commit 669cc710.

The patch did not work as expected: The endianess test is currently
not run at all anymore.
Signed-off-by: NThomas Huth <thuth@redhat.com>

This reverts commit ee1f6c81.

The patch did not work as expected: The wdt_ib700 test is currently
not run at all anymore.
Signed-off-by: NThomas Huth <thuth@redhat.com>

It is protected by CONFIG_WDT_IB700.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

It is already protected by CONFIG_ISA_TESTDEV in all architectures.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We protect it with CONFIG_VMXNET3_PCI now, so no need to also put it
on i386.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is only for x86* architecture.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Once there, untangle endianness-test and boot-serial-test.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

---

boot-serial-test don't depend on isa-testdev.  Thanks Thomas.

qmp-test is for QMP protocol tests.  Commit e4a426e7 added generic,
basic tests of query commands to it.  Move them to their own test
program qmp-cmd-test, to keep qmp-test focused on the protocol.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-6-armbru@redhat.com>

Signed-off-by: NEmilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-10-cota@braap.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NEmilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-9-cota@braap.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The check should be unnecessary since commit
e7b3af81 "glib: bump min required glib
library version to 2.40".
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180730153639.26466-1-marcandre.lureau@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Because qtest does not support s390 channel I/O, s390 only performs smoke tests on
those few devices that do not have any functional tests.  Therefore, every time we
add functional tests for a virtio device, the choice is between removing
those tests from the s390 suite (so that s390 actually _loses_ coverage)
or sprinkling the test with architecture checks.

This patch simply creates a ccw-specific test that only performs smoke tests on
all virtio-ccw devices.  If channel I/O support is ever added to qtest and libqos,
then this file can go away.  In the meanwhile, it simplifies maintenance and
makes sure that all virtio devices are tested.
Acked-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

The ehci test also test uhci.  Welcome to the worderfull world of USB.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

It was not possible to compile out pvpanic.  Use the same trick
than applesmc.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

test-file-redirector uses rtl8139 in everything except s390.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>