During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.

Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset.  Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NLadi Prosek <lprosek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

so it would be possible to verify _PXM generation in
DSDT and SRAT tables.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.

_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Replace repeated pattern

    for (i = 0; i < nb_numa_nodes; i++) {
        if (test_bit(idx, numa_info[i].node_cpu)) {
           ...
           break;

with a helper function to lookup numa node index for cpu.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.

As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: NLiang Li <liang.z.li@intel.com>
Suggested-by: NThomas Huth <thuth@redhat.com>
Reviewd-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NEd Maste <emaste@freebsd.org>
Message-id: 1475611369-74971-1-git-send-email-emaste@freebsd.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2016-10-06

Currently accumulated target-ppc and spapr machine related patches.
  - More POWER9 instruction implementations
  - Additional test case / enabling of test cases for Power
  - Assorted fixes

# gpg: Signature made Thu 06 Oct 2016 07:05:07 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20161006: (29 commits)
  hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machine
  tests/pxe: Use -nodefaults to speed up ppc64/ipv6 pxe test
  spapr: fix check of cpu alias name in spapr_get_cpu_core_type()
  tests: enable ohci/uhci/xhci tests on PPC64
  libqos: use generic qtest_shutdown()
  libqos: add PCI management in qtest_vboot()/qtest_shutdown()
  libqos: add PPC64 PCI support
  target-ppc: fix vmx instruction type/type2
  target-ppc/kvm: Enable transactional memory on POWER8 with KVM-HV, too
  target-ppc/kvm: Add a wrapper function to check for KVM-PR
  MAINTAINERS: Add two more ppc related files
  target-ppc: Implement mtvsrws instruction
  target-ppc: add vclzlsbb/vctzlsbb instructions
  target-ppc: add vector compare not equal instructions
  target-ppc: fix invalid mask - cmpl, bctar
  target-ppc: add stxvb16x instruction
  target-ppc: add lxvb16x instruction
  target-ppc: add stxvh8x instruction
  target-ppc: add lxvh8x instruction
  target-ppc: improve stxvw4x implementation
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
"  NAME   some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.

Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.

In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).

Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)

A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org

A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b98). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

SLOF is unfortunately quite slow when running with TCG, so
the pxe test is also performing rather slow here. By using
"-nodefaults" we can disable some devices (vscsi) that we
are not interested in here, so that SLOF does not have to
scan them during boot and thus starts up a little bit faster.
The ppc64 pxe-test now only takes 27 seconds on my laptop
instead of 33 seconds.
The "-nodefaults" flag seems to work fine for the x86 tests,
too, so it is added here unconditionally here (though there
is no speed-up on x86 by using this flag).
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.

$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition

This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").

The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Machine specific shutdown function can be registered by
the machine specific qtest_XXX_boot() if needed.

So we will not have to test twice the architecture (on boot and on
shutdown) if the test can be run on several architectures.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
[dwg: Fixed build problem on 32-bit hosts]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

A few of the new instructions added inadvertently changed the type of
old instruction(PPC_ALTIVEC) to PPC2_ALTIVEC_207 in the dual form
declaration.

commit: b5d569a1 (target-ppc: add vector extract instructions)
commit: e7b1e06f (target-ppc: add vector insert instructions)
commit: 3aa56a19 (target-ppc: add vector compare not equal instructions)

New ISA 3.0 instructions added:
    vextractub     PPC_NONE     PPC2_ISA300
    vextractuh     PPC_NONE     PPC2_ISA300
    vextractuw     PPC_NONE     PPC2_ISA300
    vinsertb       PPC_NONE     PPC2_ISA300
    vinserth       PPC_NONE     PPC2_ISA300
    vinsertw       PPC_NONE     PPC2_ISA300
    vcmpneb        PPC_NONE     PPC2_ISA300
    vcmpneh        PPC_NONE     PPC2_ISA300
    vcmpnew        PPC_NONE     PPC2_ISA300

Affected older instructions:
    vspltb         PPC_ALTIVEC  PPC_NONE
    vsplth         PPC_ALTIVEC  PPC_NONE
    vspltw         PPC_ALTIVEC  PPC_NONE
    vspltisb       PPC_ALTIVEC  PPC_NONE
    vspltish       PPC_ALTIVEC  PPC_NONE
    vspltisw       PPC_ALTIVEC  PPC_NONE
    vcmpequb       PPC_ALTIVEC  PPC_NONE
    vcmpequh       PPC_ALTIVEC  PPC_NONE
    vcmpequw       PPC_ALTIVEC  PPC_NONE

Change the instruction type/type2 for the older instructions back to
what it was(PPC_ALTIVEC).

CC: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reported-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Transactional memory is also supported on POWER8 KVM-HV if the
KVM_CAP_PPC_HTM is not available in the kernel yet, so add a hack
to allow TM here, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

It makes more sense if we have a proper function to check
for KVM-PR than to check for the GET_PVINFO extension all
over the place.
Signed-off-by: NThomas Huth <thuth@redhat.com>
[dwg: Expanded a comment to discourage overuse of this function]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The file hw/intc/heathrow_pic.c belongs to the Old World Mac
machine, and pc-bios/ppc_rom.bin belongs to the PReP machine.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

mtvsrws: Move To VSR Word & Splat
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The following vector instructions are added from ISA 3.0.

vclzlsbb - Vector Count Leading Zero Least-Significant Bits Byte
vctzlsbb - Vector Count Trailing Zero Least-Significant Bits Byte
Signed-off-by: NRajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The following vector compare not equal instructions are added from ISA 3.0.

vcmpneb - Vector Compare Not Equal Byte
vcmpneh - Vector Compare Not Equal Halfword
vcmpnew - Vector Compare Not Equal Word
Signed-off-by: NRajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

cmpl:  invalid bit mask should be 0x00400001
bctar: invalid bit mask should be 0x0000E000
Signed-off-by: NAvinesh Kumar <avinesku@linux.vnet.ibm.com>
Signed-off-by: NRajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

stxvb16x: Store VSX Vector Byte*16

Vector (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Store results in following:

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

lxvb16x: Load VSX Vector Byte*16

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Vector load results in (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

stxvh8x:  Store VSX Vector Halfword*8

Vector (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+

Store results in following:

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Tweak commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

lxvh8x:  Load VSX Vector Halfword*8

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Vector load results in (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Tweak to commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Manipulate data and store 8bytes instead of 4bytes.

Vector (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+

Store results in following:

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Load 8byte at a time and manipulate.

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+

Vector load results in (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[dwg: Slight tweak to commit description]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

mtvsrdd: Move To VSR Double Doubleword
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

mfvsrld: Move From VSR Lower Doubleword
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff.  There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

A typo introduced in f19661c8 prevents qemu from building when configured
with --enable-trace-backend=dtrace.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>