Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-3-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Writes to AdvSIMD registers flush the bits above 128.

Buglink: https://bugs.launchpad.net/bugs/1863247Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-2-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Up to now, the z2 machine only boots if a flash image is provided.
This is not really necessary; the machine can boot from initrd or from
SD without it. At the same time, having to provide dummy flash images
is a nuisance and does not add any real value. Make it optional.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210903.18602-1-linux@roeck-us.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Up to now, the mainstone machine only boots if two flash images are
provided. This is not really necessary; the machine can boot from initrd
or from SD without it. At the same time, having to provide dummy flash
images is a nuisance and does not add any real value. Make it optional.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210824.18513-1-linux@roeck-us.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix warning reported by Clang static code analyzer:

    CC      hw/misc/iotkit-secctl.o
  hw/misc/iotkit-secctl.c:343:9: warning: Value stored to 'value' is never read
          value &= 0x00f000f3;
          ^        ~~~~~~~~~~

Fixes: b3717c23
Reported-by: Clang Static Analyzer
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200217132922.24607-1-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This returns a fixed but non-zero value for the chip id.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-3-joel@jms.id.au
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This splits the common write callback into separate ast2400 and ast2500
implementations. This makes it clearer when implementing differing
behaviour.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-2-joel@jms.id.au
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2020-02-21

Here's the next patch of ppc target patches.  Highlights are:
  * Some fixes for CAS / unplug interactions
  * Remove some leaks of device trees
  * Some fixes for the PHB3 and PHB4 devices
  * Support for NVDIMMs on the pseries machine type
  * Assorted other fixes and cleanups

# gpg: Signature made Fri 21 Feb 2020 03:35:40 GMT
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.0-20200221:
  hw/ppc/virtex_ml507:fix leak of fdevice tree blob
  spapr: Fix handling of unplugged devices during CAS and migration
  spapr: Don't use spapr_drc_needed() in CAS code
  ppc: free 'fdt' after reset the machine
  target/ppc/cpu.h: Clean up comments in the struct CPUPPCState definition
  target/ppc/cpu.h: Move fpu related members closer in cpu env
  target/ppc: Fix typo in comments
  spapr: Allow changing offset for -kernel image
  pnv/phb3: Add missing break statement
  pnv/phb4: Fix error path in pnv_pec_realize()
  pnv/phb3: Convert 1u to 1ull
  target/ppc/cpu.h: Remove duplicate includes
  spapr: Add Hcalls to support PAPR NVDIMM device
  spapr: Add NVDIMM device support
  nvdimm: add uuid property to nvdimm
  mem: move nvdimm_device_list to utilities
  ppc: function to setup latest class options
  ppc/pnv: Fix PCI_EXPRESS dependency
  qtest: Fix rtas dependencies
  spapr/rtas: Print message from "ibm,os-term"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches:
- qemu-img convert: New --target-is-zero parameter
- qcow2: Specify non-default compression type flag
- optionally flat output for query-named-block-nodes
- some fixes
- pseudo-creation of images on block devices is now done by a generic
  block layer function

# gpg: Signature made Thu 20 Feb 2020 16:05:34 GMT
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-02-20:
  iotests: Test snapshot -l field separation
  block: Fix VM size field width in snapshot dump
  iotests: Test convert -n -B to backing-less target
  qemu-img: Fix convert -n -B for backing-less targets
  iotests: Add test for image creation fallback
  iscsi: Drop iscsi_co_create_opts()
  file-posix: Drop hdev_co_create_opts()
  block: Generic file creation fallback
  block/nbd: Fix hang in .bdrv_close()
  iotests/279: Fix for non-qcow2 formats
  block/backup-top: fix flags handling
  block: always fill entire LUKS header space with zeros
  qemu-img: Add --target-is-zero to convert
  qapi: Allow getting flat output from 'query-named-block-nodes'
  iotests/147: Fix drive parameters
  iotests: Remove the superfluous 2nd check for the availability of quorum
  docs: qcow2: introduce compression type feature
  docs: improve qcow2 spec about extending image header
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: NEuler Robot <euler.robot@huawei.com>
Signed-off-by: NChen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20200218091154.21696-3-kuhn.chenqun@huawei.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

We already detect if a device is being hot plugged before CAS to trigger
a CAS reboot and during migration to migrate the state of the associated
DRC. But hot unplugging a device is also an asynchronous operation that
requires the guest to take action. This means that if the guest is migrated
after the hot unplug event was sent but before it could release the device
with RTAS, the destination QEMU doesn't know about the pending unplug
operation and doesn't actually remove the device when the guest finally
releases it.

Similarly, if the unplug request is fired before CAS, the guest isn't
notified of the change, just like with hotplug. It ends up booting with
the device still present in the DT and configures it, just like it was
never removed. Even weirder, since the event is still queued, it will
be eventually processed when some other unrelated event is posted to
the guest.

Enhance spapr_drc_transient() to also return true if an unplug request is
pending. This fixes the issue at CAS with a CAS reboot request and
causes the DRC state to be migrated. Some extra care is still needed to
inform the destination that an unplug request is pending : migrate the
unplug_requested field of the DRC in an optional subsection. This might
break backwards migration, but this is still better than ending with
an inconsistent guest.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Message-Id: <158169248798.3465937.1108351365840514270.stgit@bahia.lan>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

We currently don't support hotplug of devices between boot and CAS. If
this happens a CAS reboot is triggered. We detect this during CAS using
the spapr_drc_needed() function which is essentially a VMStateDescription
.needed callback. Even if the condition for CAS reboot happens to be the
same as for DRC migration, it looks wrong to piggyback a migration helper
for this.

Introduce a helper with slightly more explicit name and use it in both CAS
and DRC migration code. Since a subsequent patch will enhance this helper
to cover the case of hot unplug, let's go for spapr_drc_transient(). While
here convert spapr_hotplugged_dev_before_cas() to the "transient" wording as
well.

This doesn't change any behaviour.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Message-Id: <158169248180.3465937.9531405453362718771.stgit@bahia.lan>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

'fdt' forgot to clean both e500 and pnv when we call 'system_reset' on ppc,
this patch fix it. The leak stacks are as follow:

Direct leak of 4194304 byte(s) in 4 object(s) allocated from:
    #0 0x7fafe37dd970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
    #1 0x7fafe2e3149d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
    #2 0x561876f7f80d in create_device_tree /mnt/sdb/qemu-new/qemu/device_tree.c:40
    #3 0x561876b7ac29 in ppce500_load_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:364
    #4 0x561876b7f437 in ppce500_reset_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:617
    #5 0x56187718b1ae in qemu_devices_reset /mnt/sdb/qemu-new/qemu/hw/core/reset.c:69
    #6 0x561876f6938d in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1412
    #7 0x561876f6a25b in main_loop_should_exit /mnt/sdb/qemu-new/qemu/vl.c:1645
    #8 0x561876f6a398 in main_loop /mnt/sdb/qemu-new/qemu/vl.c:1679
    #9 0x561876f7da8e in main /mnt/sdb/qemu-new/qemu/vl.c:4438
    #10 0x7fafde16b812 in __libc_start_main ../csu/libc-start.c:308
    #11 0x5618765c055d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)

Direct leak of 1048576 byte(s) in 1 object(s) allocated from:
    #0 0x7fc0a6f1b970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
    #1 0x7fc0a656f49d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
    #2 0x55eb05acd2ca in pnv_dt_create /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:507
    #3 0x55eb05ace5bf in pnv_reset /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:578
    #4 0x55eb05f2f395 in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1410
    #5 0x55eb05f43850 in main /mnt/sdb/qemu-new/qemu/vl.c:4403
    #6 0x7fc0a18a9812 in __libc_start_main ../csu/libc-start.c:308
    #7 0x55eb0558655d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)
Reported-by: NEuler Robot <euler.robot@huawei.com>
Signed-off-by: NPan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200214033206.4395-1-pannengyuan@huawei.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The cpu env struct is quite complex but comments supposed to explain
it in its definition just make it harder to read. Reformat and reword
some comments to make it clearer and more readable.
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8707144ab1ccf9c5c89a39c2d7a0b02307ca25d4.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Move fp_status and fpscr closer to other floating point and vector
related members in cpu env definition so they are in one group.
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b50e9e7eec2c383ae878b397d0b2927efc9ea43.1581888834.git.balaton@eik.bme.hu>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

"Deferred" was misspelled as "differed" in some comments, correct this
typo,
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200214155748.0896B745953@zero.eik.bme.hu>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This allows moving the kernel in the guest memory. The option is useful
for step debugging (as Linux is linked at 0x0); it also allows loading
grub which is normally linked to run at 0x20000.

This uses the existing kernel address by default.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032943.121178-6-aik@ozlabs.ru>
Reviewed-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

We obviously don't want to print out an error message if addr points to
a valid register.

Reported-by: Coverity CID 1419391 Missing break in switch
Fixes: 9ae1329e "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: NGreg Kurz <groug@kaod.org>
Message-Id: <158153365202.3229002.11521084761048102466.stgit@bahia.lan>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Obviously, we want to pass &local_err so that we can check it then
line below, not errp.

Reported-by: Coverity CID 1419395 'Constant' variable guards dead code
Fixes: 4f9924c4 "ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge"
Signed-off-by: NGreg Kurz <groug@kaod.org>
Message-Id: <158153364605.3229002.2796177658957390343.stgit@bahia.lan>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

As reported by Coverity defect CID 1419397, the 'j' variable goes up to
63 and shouldn't be used to left shift a 32-bit integer.

The result of the operation goes to a 64-bit integer : use a 64-bit
constant.

Reported-by: Coverity CID 1419397 Bad bit shift operation
Fixes: 9ae1329e "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: NGreg Kurz <groug@kaod.org>
Message-Id: <158153364010.3229002.8004283672455615950.stgit@bahia.lan>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Commit 74433bf0 added some includes but added them twice. Since
these are guarded against multiple inclusion including them once is
enough.
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200212223207.5A37574637F@zero.eik.bme.hu>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This patch implements few of the necessary hcalls for the nvdimm support.

PAPR semantics is such that each NVDIMM device is comprising of multiple
SCM(Storage Class Memory) blocks. The guest requests the hypervisor to
bind each of the SCM blocks of the NVDIMM device using hcalls. There can
be SCM block unbind requests in case of driver errors or unplug(not
supported now) use cases. The NVDIMM label read/writes are done through
hcalls.

Since each virtual NVDIMM device is divided into multiple SCM blocks,
the bind, unbind, and queries using hcalls on those blocks can come
independently. This doesn't fit well into the qemu device semantics,
where the map/unmap are done at the (whole)device/object level granularity.
The patch doesnt actually bind/unbind on hcalls but let it happen at the
device_add/del phase itself instead.

The guest kernel makes bind/unbind requests for the virtual NVDIMM device
at the region level granularity. Without interleaving, each virtual NVDIMM
device is presented as a separate guest physical address range. So, there
is no way a partial bind/unbind request can come for the vNVDIMM in a
hcall for a subset of SCM blocks of a virtual NVDIMM. Hence it is safe to
do bind/unbind everything during the device_add/del.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <158131059899.2897.11515211602702956854.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm
device interface in QEMU to support virtual NVDIMM devices for Power.
Create the required DT entries for the device (some entries have
dummy values right now).

The patch creates the required DT node and sends a hotplug
interrupt to the guest. Guest is expected to undertake the normal
DR resource add path in response and start issuing PAPR SCM hcalls.

The device support is verified based on the machine version unlike x86.

This is how it can be used ..
Ex :
For coldplug, the device to be added in qemu command line as shown below
-object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
-device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0

For hotplug, the device to be added from monitor as below
object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
               [Early implementation]
Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

For ppc64, PAPR requires the nvdimm device to have UUID property
set in the device tree. Add an option to get it from the user.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <158131056931.2897.14057087440721445976.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

We are going to add more init for the latest machine, so move the setup
to a function so we don't have to change the DEFINE_SPAPR_MACHINE macro
each time.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Message-Id: <20200207064628.1196095-1-mst@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

When PHB4 bridge has been added, the dependencies to PCIE_PORT has been
added to XIVE_SPAPR and indirectly to PSERIES.
The build of the PowerNV machine is fine while we also build the PSERIES
machine.
If we disable the PSERIES machine, the PowerNV build fails because the
PCI Express files are not built:

/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power8_pic_print_info':
.../hw/ppc/pnv.c:623: undefined reference to `pnv_phb3_msi_pic_print_info'
/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power9_pic_print_info':
.../hw/ppc/pnv.c:639: undefined reference to `pnv_phb4_pic_print_info'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_write_config':
.../hw/usb/hcd-ehci-pci.c:129: undefined reference to `pci_default_write_config'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_realize':
.../hw/usb/hcd-ehci-pci.c:68: undefined reference to `pci_allocate_irq'
/usr/bin/ld: .../hw/usb/hcd-ehci-pci.c:72: undefined reference to `pci_register_bar'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'

This patch fixes the problem by adding needed dependencies to POWERNV.

Fixes: 4f9924c4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Message-Id: <20200205232016.588202-3-lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

qtest "rtas" command is only available with pseries not all ppc64 targets,
so if I try to compile only powernv machine, the build fails with:

  /usr/bin/ld: qtest.o: in function `qtest_process_command':
  .../qtest.c:645: undefined reference to `qtest_rtas_call'

We fix this by enabling rtas command only with pseries machine.

Fixes: eeddd59f ("tests: add RTAS command in the protocol")
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Message-Id: <20200205232016.588202-2-lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The "ibm,os-term" RTAS call has a single parameter which is a pointer to
a message from the guest kernel about the termination cause; this prints
it.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032044.118585-1-aik@ozlabs.ru>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Implement membarrier, SO_RCVTIMEO and SO_SNDTIMEO
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports

# gpg: Signature made Thu 20 Feb 2020 09:20:20 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
  linux-user: Add support for selected alsa timer instructions using ioctls
  linux-user: Add support for getting/setting selected alsa timer parameters using ioctls
  linux-user: Add support for selecting alsa timer using ioctl
  linux-user: Add support for getting/setting specified alsa timer parameters using ioctls
  linux-user: Add support for getting alsa timer version and id
  linux-user: remove gemu_log from the linux-user tree
  linux-user: Use `qemu_log' for strace
  linux-user: Use `qemu_log' for non-strace logging
  configure: Avoid compiling system tools on user build by default
  linux-user/strace: Improve output of various syscalls
  configure: linux-user doesn't need neither fdt nor slirp
  linux-user: implement getsockopt SO_RCVTIMEO and SO_SNDTIMEO
  linux-user: Implement membarrier syscall
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix memory leak with fdt
cosmetic change in code and logs
update mailmap

# gpg: Signature made Wed 19 Feb 2020 10:15:56 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/xtensa/xtfpga:fix leak of fdevice tree blob
  hw/nios2:fix leak of fdevice tree blob
  hw/net/rocker: Report unimplemented feature with qemu_log_mask(UNIMP)
  hw/block/pflash_cfi02: Remove unneeded variable assignment
  hw/display/qxl: Remove unneeded variable assignment
  contrib/rdmacm-mux: Remove superfluous semicolon
  tests/qtest/libqos/qgraph: Remove superfluous semicolons
  target/i386/whpx: Remove superfluous semicolon
  ui/input-barrier: Remove superfluous semicolon
  hw/vfio/display: Remove superfluous semicolon
  hw/scsi/esp: Remove superfluous semicolon
  hw/m68k/next-cube: Remove superfluous semicolon
  hw/arm/xlnx-versal: Remove superfluous semicolon
  audio/alsaaudio: Remove superfluous semicolons
  scripts/checkpatch.pl: Detect superfluous semicolon in C code
  Report stringified errno in VFIO related errors
  mailmap: Add entry for Yu-Chen Lin
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a test that all fields in "qemu-img snapshot -l"s output are
separated by spaces.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-3-mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[mreitz: Renamed test from 284 to 286]
Signed-off-by: NMax Reitz <mreitz@redhat.com>

When printing the snapshot list (e.g. with qemu-img snapshot -l), the VM
size field is only seven characters wide.  As of de38b500, this is
not necessarily sufficient: We generally print three digits, and this
may require a decimal point.  Also, the unit field grew from something
as plain as "M" to " MiB".  This means that number and unit may take up
eight characters in total; but we also want spaces in front.

Considering previously the maximum width was four characters and the
field width was chosen to be three characters wider, let us adjust the
field width to be eleven now.

Fixes: de38b500
Buglink: https://bugs.launchpad.net/qemu/+bug/1859989Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-2-mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

This must not crash.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-3-mreitz@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

s.target_has_backing does not reflect whether the target BDS has a
backing file; it only tells whether we should use a backing file during
conversion (specified by -B).

As such, if you use convert -n, the target does not necessarily actually
have a backing file, and then dereferencing out_bs->backing fails here.

When converting to an existing file, we should set
target_backing_sectors to a negative value, because first, as the
comment explains, this value is only used for optimization, so it is
always fine to do that.

Second, we use this value to determine where the target must be
initialized to zeroes (overlays are initialized to zero after the end of
their backing file).  When converting to an existing file, we cannot
assume that to be true.

Cc: qemu-stable@nongnu.org
Fixes: 351c8eff
       ("qemu-img: Special post-backing convert handling")
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-2-mreitz@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-6-mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
[mreitz: Added a note that NBD does not support resizing, which is why
         the second case is expected to fail]
Signed-off-by: NMax Reitz <mreitz@redhat.com>

The generic fallback implementation effectively does the same.
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-5-mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

The generic fallback implementation effectively does the same.
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-4-mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

If a protocol driver does not support image creation, we can see whether
maybe the file exists already.  If so, just truncating it will be
sufficient.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-3-mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

When nbd_close() is called from a coroutine, the connection_co never
gets to run, and thus nbd_teardown_connection() hangs.

This is because aio_co_enter() only puts the connection_co into the main
coroutine's wake-up queue, so this main coroutine needs to yield and
wait for connection_co to terminate.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-2-mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>