Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit 6389c45441269baa2873e6feafebd17105ddeaf6
Author: Jan Kiszka <jan.kiszka@siemens.com>
Date:   Mon Mar 1 18:17:26 2010 +0100

    qemu-kvm: Cleanup/fix TSC and PV clock writeback
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

And add kvm_has_msr_hsave_pa(), to avoid warnings on older
kernels without support.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit 2bba4446746add456ceeb0e8359a43032a2ea333
Author: Alexander Graf <agraf@suse.de>
Date:   Thu Dec 18 15:38:32 2008 +0100

    Enable nested SVM support in userspace
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch removes following warnings:

target-i386/kvm.c: In function 'kvm_put_msrs':
target-i386/kvm.c:782: error: unused variable 'i'
target-i386/kvm.c: In function 'kvm_get_msrs':
target-i386/kvm.c:1083: error: label at end of compound statement
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There is no reason why SRAO event received by the main thread
is the only one that being broadcasted.

According to the x86 ASDM vol.3A 15.10.4.1,
MCE signal is broadcast on processor version 06H_EH or later.

This change is required to handle SRAR in smp guests.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

And restruct this block to call kvm_mce_in_exception() only when it is
required.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

SCI is level triggered. pci hotplug should behave appropriately.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

From: Avi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Port qemu-kvm's

commit 1bab5d11545d8de5facf46c28630085a2f9651ae
Author: Huang Ying <ying.huang@intel.com>
Date:   Wed Mar 3 16:52:46 2010 +0800

    Add savevm/loadvm support for MCE

    MCE registers are saved/load into/from CPUState in
    kvm_arch_save/load_regs. To simulate the MCG_STATUS clearing upon
    reset, MSR_MCG_STATUS is set to 0 for KVM_PUT_RESET_STATE.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's

commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef
Author: Huang Ying <ying.huang@intel.com>
Date:   Mon Sep 21 10:43:25 2009 +0800

    MCE: Relay UCR MCE to guest

    UCR (uncorrected recovery) MCE is supported in recent Intel CPUs,
    where some hardware error such as some memory error can be reported
    without PCC (processor context corrupted). To recover from such MCE,
    the corresponding memory will be unmapped, and all processes accessing
    the memory will be killed via SIGBUS.

    For KVM, if QEMU/KVM is killed, all guest processes will be killed
    too. So we relay SIGBUS from host OS to guest system via a UCR MCE
    injection. Then guest OS can isolate corresponding memory and kill
    necessary guest processes only. SIGBUS sent to main thread (not VCPU
    threads) will be broadcast to all VCPU threads as UCR MCE.

aliguori: fix build
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In QEMU-KVM, physical address != RAM address. While MCE simulation
needs physical address instead of RAM address. So
kvm_physical_memory_addr_from_ram() is implemented to do the
conversion, and it is invoked before being filled in the IA32_MCi_ADDR
MSR.
Reported-by: NDean Nelson <dnelson@redhat.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

To be used by next patches.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's MCE support

commit c68b2374c9048812f488e00ffb95db66c0bc07a7
Author: Huang Ying <ying.huang@intel.com>
Date:   Mon Jul 20 10:00:53 2009 +0800

    Add MCE simulation support to qemu/kvm

    KVM ioctls are used to initialize MCE simulation and inject MCE. The
    real MCE simulation is implemented in Linux kernel. The Kernel part
    has been merged.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Block SIGALRM, SIGIO and consume them via signalfd.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Port qemu-kvm's signalfd compat code.

commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5
Author: Anthony Liguori <aliguori@us.ibm.com>
Date:   Wed May 7 11:55:47 2008 -0500

    Use signalfd() in io-thread

    This patch reworks the IO thread to use signalfd() instead of sigtimedwait()
    This will eliminate the need to use SIGIO everywhere.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the svm cpuid feature flags to the qemu
intialization path. It also adds the svm features available
on phenom to its cpu-definition and extends the host cpu
type to support all svm features KVM can provide.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch cleans the (stack-allocated) cpuid definition to
0 before actually initializing it.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

-Wall enables a bunch of warnings at once.  configure puts it after
$gcc_flags.  This makes it impossible to disable warnings enabled by
-Wall there.  Fix by putting configured flags last.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When qemu is configured with --enable-debug-tcg,
gcc throws this warning (or error with -Werror):

tcg/tcg.c:1030: error: comparison of unsigned expression >= 0 is always true

Fix it by removing the >= 0 part.
The type cast to 'unsigned' catches negative values of op
(which should never happen).

This is a modification of Hollis Blanchard's patch.

Cc: Hollis Blanchard <hollis@penguinppc.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so
it actually receives events.  Also make sure we only remove the handler
if we registered it before.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch updates the vmmouse handler registration and activation.

Old behavior:
  vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute
  unregister the handler and re-register it.

New behavior:
  vmmouse_request_relative and vmmouse_request_absolute will unregister
  the handler in case the mode did change.  Then register and active the
  handler with current mode if needed.

Note that the old code never ever *activates* the handler, so the
vmmouse doesn't receive events.  This trips up Fedora 14 for example:
Boot a default install without usb tablet, watch the X-Server activating
the vmmouse then, enjoy a non-functional mouse.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

readv & writev, read & write respectively from the current offset
of the file & hence their use has to be preceeded by a call to lseek.
preadv/writev can be used instead, as they take the offset as an argument.
This saves one system call( lseek ).
In case preadv is not supported, it is implemented by an lseek
followed by a readv. Depending upon the configuration of QEMU, the
appropriate read & write methods are selected. This patch also fixes the
zero byte read/write bug & obviates the need to apply a fix for that bug separately.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NSanchit Garg <sancgarg@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

We would need this to make sure we handle the mapped
security model correctly for different xattr names.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

The O_DIRECT flag imposes alignment restrictions on the length and address
of userspace buffers and the file offset of I/Os.

While VirtFS/9P has plans to implement O_DIRECT behavior on the server,
for now we will stick to a behavior like NFS by bypassing the page cache
only on the client. Server may still cache the I/O.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Synopsis

        size[4] TReadlink tag[2] fid[4]
        size[4] RReadlink tag[2] target[s]

Description
        Readlink is used to return the contents of the symoblic link
        referred by fid. Contents of symboic link is returned as a
        response.

        target[s] - Contents of the symbolic link referred by fid.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

SYNOPSIS
    size[4] Tfsync tag[2] fid[4]

    size[4] Rfsync tag[2]

DESCRIPTION

The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other  permanent  storage
device)  where that  file  resides.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Synopsis

    size[4] TGetlock tag[2] fid[4] getlock[n]
    size[4] RGetlock tag[2] getlock[n]

Description

TGetlock is used to test for the existence of byte range posix locks on
a file identified by given fid. The reply contains getlock structure. If
the lock could be placed it returns F_UNLCK in type field of getlock structure.
Otherwise it returns the details of the conflicting locks in the getlock
structure

    getlock structure:
      type[1] - Type of lock: F_RDLCK, F_WRLCK
      start[8] - Starting offset for lock
      length[8] - Number of bytes to lock
        If length is 0, lock all bytes starting at the location
        'start' through to the end of file
      proc_id[4] - process id that wants to take lock/owns the task
               in case of reply
      client[4] - Client id of the system that owns the process
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Synopsis

    size[4] TLock tag[2] fid[4] flock[n]
    size[4] RLock tag[2] status[1]

Description

Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request

    flock structure:
        type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
        flags[4] - Flags could be either of
          P9_LOCK_FLAGS_BLOCK(1) - Blocked lock request, if there is a
            conflicting lock exists, wait for that lock to be released.
          P9_LOCK_FLAGS_RECLAIM(2) - Reclaim lock request, used when client is
            trying to reclaim a lock after a server restrart (due to crash)
        start[8] - Starting offset for lock
        length[8] - Number of bytes to lock
          If length is 0, lock all bytes starting at the location 'start'
          through to the end of file
        pid[4] - PID of the process that wants to take lock
        client_id[4] - Unique client id

        status[1] - Status of the lock request, can be
          P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
          P9_LOCK_GRACE(3)
          P9_LOCK_SUCCESS - Request was successful
          P9_LOCK_BLOCKED - A conflicting lock is held by another process
          P9_LOCK_ERROR - Error while processing the lock request
          P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
                requests in this period (except locks with
                P9_LOCK_FLAGS_RECLAIM flag set)
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

When 9P server fails to create a file due to permission problems it should
return EPERM. However the current 9P2000.L code returns EBADF. EBADF is NOT
a valid return value from open() call.

The problem is because we do not preserve the errno variable properly. If the
file open had failed, the call to close() on the fd in v9fs_post_lcreate()
fails and sets errno to EBADF. We should preserve the errno that we got from
open() and we should call close() only if we had a valid fd.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Use PRI*64 to print full 64 bit data even on ILP32 hosts.

Print also sixth tracepoint parameter.
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Document the restriction that format strings must begin and end with
double quotes.  This is for easy parsing since we don't run cpp over
trace-events.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Replace debug printf statements with tracepoints.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The regular expression to parse trace event definitions assumed the
format string would be a simple double-quoted string.  However, we now
use PRI?64 for portability which splits string literals.  The regular
expression can disregard the format string entirely since simpletrace.py
never needs to use it.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

snd_pcm_start() starts the capture process and ensures that the events
are delivered to the poll handler. Without the call, capture can be started
only when there is simultaneous playback running.
Signed-off-by: NJindrich Makovicka <makovick@gmail.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Playback control function did not disable polling when playback stops.
Caused busy spinning of the main loop due to unprocessed events.
Signed-off-by: NJindrich Makovicka <makovick@gmail.com>
Signed-off-by: Nmalc <av1474@comtv.ru>