Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It is only used in mips softmmu, compile only there.
it_shift field was only used for vga_isa_mm, move it from VGACommonState
to ISAVGAMMstate.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adjust all the VGAState in VGACommonState
Compile vga-isa.o in the targets that use it
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adjust all the VGAState in VGACommonState
Compile vga-pci.o only for targets that use it.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Once there adjust VGAState <-> VGACommonState
Export vga_common_save/vga_common_load (nreeded by wmvare_vga
Remove vga.pci_dev field, it is not needed anymore
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

andi. is microcoded and slow there.
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Up to now "select without attention" was handled the same way as
"select with attention". According to

http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt

select without ATN sends the CDB (Command Descriptor Block) directly,
whereas select with ATN sends one message phase byte
followed by 6, 10, or 12 command phase bytes.

The attached patch implements the behaviour described above.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

they aren't integrated into the build but we can do that incrementally.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

8baf73ad (qdev/isa: convert fdc)
breaks MIPS Malta:

Tried to create isa device isa-fdc with no isa bus present

Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.

Thanks to Gerd Hoffmann for his hints.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QDict API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qdict
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This file is used by the QDict stress test, it adds 5k nodes
on the dictionary and performs various operations.

My original file had 21k entries and almost 400k of size. After
some discussion with Eduardo Habkost, I decided to reduce the
size.

There are ways to generate this kind of data dynamically, but
it has its problems too.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QString API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qstring
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QInt API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qint
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Check is a unit testing framework for C.

All the QObjects have unit-tests and more will be written for the
future data types.

More info about check can be found at:

http://check.sourceforge.net/Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The 'i' argument type is for 32-bit only and most handlers
will use an 'int' to store its value.

It's better to fail gracefully when the user enters a value
greater than 32-bit than to get subtle casting bugs.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit drops all the code used to handle the 'args[]' array,
as now we use a dictionary to pass arguments.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's not used anymore, as QDict is now used to handle string
memory allocation/deallocation.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

GET_TLONG() and GET_TPHYSADDR() are not needed anymore, QInt can
handle such conversions.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to help the integration with unit-tests and having a better
design, this commit splits monitor_handle_command() into two parts.

The parsing code is moved to a function called monitor_parse_command(),
while allocating memory and calling the handler is still done by
monitor_handle_command().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive ten arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 79c4f6b0 added handler_8 and
handler_9 handling, but there isn't any command handler with those
number of arguments.

Just drop them.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>