- 31 10月, 2011 8 次提交
-
-
由 Harsh Prateek Bora 提交于
Use QLIST_INSERT_HEAD_RCU and rcu_read_lock/unlock instead of rwlocks. Use v9fs_synth_mutex as a write-only mutex to handle concurrent writers. Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Harsh Prateek Bora 提交于
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not re-ordered and therefore avoiding a crash. There may be parallel readers which should be allowed for lock-free access and this variant allows us to get rid of rwlocks used by readers. SynthFS is a special case where we dont really need full RCU capabilities as it doesnt allow list entry deletion but concurrent readers/writers and instruction re-ordering should not result in a crash. Also, once the real rcu is available, dummy rcu macro definitions will go away and the code will still work as expected. This patchwork is based on inputs from Paolo Bonzini. Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
This patch create a synthetic file system with mount tag v_synth when -virtfs_synth command line option is specified in qemu. The synthetic file system can be mounted in guest using 9p using the below command line mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint> Synthetic file system enabled different qemu subsystem to register callbacks for read and write events from guest. The subsystem can create directories and files in the synthetic file system as show in ex below qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node); qemu_v9fs_synth_add_file(node, 0777, "testfile", my_test_read, NULL, NULL); Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
To implement synthetic file system in Qemu we may not really require file descriptor and Dir *. Make generic code use V9fsFidOpenState instead. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
A new fsdev parameter "readonly" is introduced to control accessing 9p export. "readonly" can be used to specify the access type. By default "rw" access is given to 9p export. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
According to David Gibson for some compiler/libc combinations, open_by_handle_at test in configure isn't quite right: because the file_handle pointer is never dereferenced, gcc doesn't complain even if it is undefined. Change the test as suggested by him. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
Update local_chown to remove unnecessary if loop Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
- 30 10月, 2011 5 次提交
-
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
If the deposit replaces the entire word, optimize to a move. If we're inserting to the top of the word, avoid the mask of arg2 as we'll be shifting out all of the garbage and shifting in zeros. If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit when possible. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Aneesh Kumar K.V 提交于
this patch fix multiple issues with VirtFS tracing. a) Add tracepoint to the correct code path. We handle error in complete_pdu b) Fix indentation in python script c) Fix variable naming issue in python script Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Adding an offset to a void pointer works with gcc but is not allowed by the current C standards. With -pedantic, gcc complains: exec-all.h:344: error: pointer of type ‘void *’ used in arithmetic Fix this, and also replace (unsigned long) by (uintptr_t) in the same statement. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 David Gibson 提交于
linux-headers/asm is a symlink generated during configure. It should not, therefore be committed to git, nor show up in git diffs and the like. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 28 10月, 2011 1 次提交
-
-
git://repo.or.cz/qemu/rth由 Blue Swirl 提交于
* 'rth/vis2' of git://repo.or.cz/qemu/rth: target-sparc: Implement FALIGNDATA inline. target-sparc: Implement BMASK/BSHUFFLE. target-sparc: Implement ALIGNADDR* inline. target-sparc: Implement EDGE* instructions. target-sparc: Implement fpack{16,32,fix}. target-sparc: Implement PDIST. target-sparc: Do exceptions management fully inside the helpers. target-sparc: Change fpr representation to doubles. target-sparc: Undo cpu_fpr rename. target-sparc: Extract float128 move to a function. target-sparc: Extract common code for floating-point operations. target-sparc: Make FPU/VIS helpers const when possible. target-sparc: Pass float64 parameters instead of dt0/1 temporaries. target-sparc: Add accessors for double-precision fpr access. target-sparc: Mark fprs dirty in store accessor. target-sparc: Add accessors for single-precision fpr access.
-
- 27 10月, 2011 26 次提交
-
-
-
由 Richard Henderson 提交于
This is a relatively simple sequence of shifts. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not implemeneted at all. However, this is a very simple operation so we're better off doing this inline. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This reduces the size of the individual translation blocks, since we only emit a single call for each FOP rather than three. In addition, clear_float_exceptions expands inline to a single byte store. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This allows a more efficient representation for 64-bit hosts. It should be about the same for 32-bit hosts, as we can still access the individual pieces of the double. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This also removes the unused ENV parameter from these helpers. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Begin using i64 quantities to manipulate double-precision values. On a 64-bit host this will, for the moment, generate less efficient code; on a 32-bit host code quality should be largely unchanged. Code quality for 64-bit will be adjusted with a subsequent patch. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Load, store, and "create destination". This version attempts to change the behaviour of the translator as little as possible. We previously used cpu_tmp32 as the temporary destination, and we continue to use that. This will eventually allow a change in representation of the fprs. Change the name of the cpu_fpr array to make certain that all instances are converted. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Blue Swirl 提交于
Move load and store op helpers top ldst_helper.c. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Move MMU helpers to mmu_helper.c. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Before the next patch, fix coding style of the areas affected. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Make [su]div{,cc} helpers take a parameter for CPUState instead of relying on global env. Move the functions to helper.c. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Make softint op helpers and Leon cache irq manager take a parameter for CPUState instead of relying on global env. Move the functions to int{32,64}_helper.c. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Make CWP and PSTATE helpers take a parameter for CPUState instead of relying on global env. Remove wrapper functions. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-