This commit introduces the bdrv_mon_event() function, which
should be called by block subsystems (eg. IDE) when a I/O
error occurs, so that an QMP event is emitted.

The following information is currently provided in the event:

- device name
- operation (ie. "read" or "write")
- action taken (eg. "stop")

Event example:

{ "event": "BLOCK_IO_ERROR",
    "data": { "device": "ide0-hd1",
              "operation": "write",
              "action": "stop" },
    "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit adds the basic definitions for the BLOCK_IO_ERROR
event, but actual event emission will be introduced by the
next commits.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Checking for return codes < 0 isn't really going to work with unsigned
types. Use signed types instead.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 03cbdac7 "Disable fall-back to read-only when cannot open drive's
file for read-write" result in read-only image can't be used as backed
image in qemu-img.

Cc: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The "Cross compilation for Windows with Linux" section of qemu-doc.texi
still instructs the user to use 'configure --enable-mingw32'
even after the option was removed in Aug 2008:
http://git.savannah.gnu.org/cgit/qemu.git/commit/?id=cd01b4a312248dd4e12c3d389d1a349cea4015d8

This documentation only change updates the instructions to:
* Remove use of '--enable-mingw32' in the configure example
* Correct the 'sdl-config' script name
* Remove references to i386-mingw32msvc.tar.gz which no longer exists in
  recent SDL releases
* Document the zlib dependency
Signed-off-by: NScott Tsai <scottt.tw@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In case, when qemu is executed with option like
-serial /dev/ttyS0, report if there are problems with
opening of devices. At now errors are silently ignoring.
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Makefile already supported dvi, html and info formats,
but pdf was missing.

pdf is especially convenient for printing and for
documentation reviews. I hope it will help to
improve qemu's documentation.

Make now supports the new target 'pdf' which will
create qemu-doc.pdf and qemu-tech.pdf. It is also
possible to build both files individually.

texi2pdf and texi2dvi are rather noisy, so normally
some less important warnings are suppressed.
When make is called with V=1 (verbose mode),
warnings are not suppressed.

The patch also sorts the documentation targets
alphabetically and wraps a line which was too long.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The #ifdef CONFIG_SOLARIS below was useless without this patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Same as what qemu-kvm does.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

No need to loop if less than a full buffer is read, the next
read would return EAGAIN.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move to stage3 only when remaining work can be done below max downtime.
Use qemu_get_clock_ns for measuring read performance.
Signed-off-by: NLiran Schour <lirans@il.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will manage dirty counter for each device and will allow to get the
dirty counter from above.
Signed-off-by: NLiran Schour <lirans@il.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Start transfer dirty blocks during the iterative stage. That will
reduce the time that the guest will be suspended
Signed-off-by: NLiran Schour <lirans@il.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some places use get_clock directly because they want to access the
rt_clock with nanosecond precision.  Add a function to do exactly that
instead of using internal interfaces.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

blk_mig_save_bulked_block is never called with sync flag. Remove the sync
flag. Calculate bulk completion during blk_mig_save_bulked_block.
Remove unused constants.
Signed-off-by: NLiran Schour <lirans@il.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

remove direct kvm calls from exec.c, make
kvm use memory notifiers framework instead.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

move kvm_set_phys_mem so that it will
be later available earlier in the file.
needed for next patch using memory notifiers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds notifiers for phys memory changes: a set of callbacks that
vhost can register and update kernel accordingly.  Down the road, kvm
code can be switched to use these as well, instead of calling kvm code
directly from exec.c as is done now.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The address register is overriden when it corresponds to v0 and the fast
path is taken, which leads to a crash. Fix that by using the a0 register
instead.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On SH4, the ITLB and UTLB configurations are memory mapped, so loading
ITLB entries from UTLB has to be simulated correctly. For that the QEMU
TLB has to be handle the execute (ITLB) and read/write permissions
(UTLB) seperately.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The store queues are located from 0xe0000000 to 0xe3ffffff.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reduce the size of the TLB entry from 32 to 16 bytes, reorganising
members and using a bit field.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

With the current code, the QEMU TLB is setup to match the read/write
mode of the MMU fault. This means when read access is done, the page
is setup in read-only mode. When the page is later accessed in write
mode, an MMU fault happened, and the page is switch in write-only
mode. This flip-flop causes a lot of calls to the MMU code and slow
down the emulation.

This patch changes the MMU emulation, so that the QEMU TLB is setup
to match the UTLB protection key. This impressively increase the
speed of the emulation.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There is an ITLB access violation if SR_MD=0 (user mode) while
the high bit of the protection key is 0 (priviledge mode).
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

tlb_set_page() doesn't need addresses with offset, but simply the
page aligned addresses.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The mem_idx is wrongly computed. As written in target-sh4/cpu.h, mode 0
corresponds to kernel mode (SR_MD = 1), while mode 1 corresponds to user
mode (SR_MD = 0).
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When the MMUCR TI bit is set, all the UTLB and ITLB entries should be
flushed.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The static compilation for sdl is broken after
79427693.
Signed-off-by: NTeLeMan <geleman@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds the documentation-related options "--enable-docs" and
"--disable-docs" to the help message of "configure".
Signed-off-by: NDirk Ullrich <dirk.ullrich@googlemail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The write the the PA_POWOFF register is currently ignored. Fix that by
calling qemu_system_shutdown_request() when a poweroff is requested.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

setcond is not an optional op, move it to the non-optional section.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Nmalc <av1474@comtv.ru>

Similar to the qemu-img.c patch, but I also have to unescape remaining
% signs in qemu-options.hx.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>