This allows easier use of the change vnc password monitor command from
management scripts, without having to implement expect(1)-like behaviour.
Signed-off-by: NChris Webb <chris@arachsys.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5967 c046a42c-6fe2-441c-8c8c-71466251a162

monitor_readline expects buf_size to include the terminating \0, but
do_change_vnc in monitor.c calls it as though it doesn't. The other site
where monitor_readline reads a password (in vl.c) passes the buffer 
length
correctly.
Signed-off-by: NChris Webb <chris@arachsys.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5966 c046a42c-6fe2-441c-8c8c-71466251a162

This adds a VirtIO based balloon driver.  It uses madvise() to actually balloon
the memory when possible.

Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM.  It's always safe when using TCG.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162

Balloon devices allow you to ask the guest to allocate memory.  This allows you
to release that memory.  It's mostly useful for freeing up large chunks of
memory from cooperative guests.

Ballooning is supported by both Xen and VirtIO.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5873 c046a42c-6fe2-441c-8c8c-71466251a162

when compiling on NetBSD:

warning: array subscript has type 'char'
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds very basic KVM support.  KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support.  It
current supports x86 hardware virtualization using Intel VT-x or AMD-V.  It
also supports IA64 VT-i, PPC 440, and S390.

This patch only implements the bare minimum support to get a guest booting.  It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.

Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:

w/TCG:  1:32.36 elapsed  84% CPU

w/KVM:  0:31.14 elapsed  59% CPU

Right now, KVM is disabled by default and must be explicitly enabled with
 -enable-kvm.  We can enable it by default later when we have had better
testing.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162

This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.

qemu_chr_open() sticks the devices into a linked list now.  It got a new
argument (label), so there is a name for each device.  It also assigns a
filename to each character device.  By default it just copyes the
filename passed in.  Individual drivers can fill in something else
though.  qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.

Output looks like this:

  (qemu) info chardev
  monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
  serial0: filename=unix:/tmp/run.sh-26827/console,server
  serial1: filename=pty:/dev/pts/5
  parallel0: filename=vc:640x480
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5539 c046a42c-6fe2-441c-8c8c-71466251a162

Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162

This patch introduces a command line parameter and monitor command for starting
a live migration.  The next patch will provide an example of how to use these
parameters.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162

Live migration happens in the background, but it is useful to make the monitor
command appear as if it's blocking.  This allows a management tool to
immediately know when the live migration has completed without having to poll
the migration status.

This patch allows the monitor to be suspended from a monitor callback which
will prevent new monitor commands from being executed.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5431 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5423 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5399 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5384 c046a42c-6fe2-441c-8c8c-71466251a162

If /i format is used once (with x/xp/p command) default_fmt_size is set
to -1 and subsequent commands of the form /x outputs nothing. Included
patched fixes this by setting default_fmt_size only if the command is
not of format /i.
Signed-off-by: NGleb Natapov <gleb@qumranet.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5381 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5258 c046a42c-6fe2-441c-8c8c-71466251a162

With this container_of can actually be used without causing build errors.
Reformat container_of.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5115 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5044 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5028 c046a42c-6fe2-441c-8c8c-71466251a162

Instead of dumping incorrect (ie. previously read) data, report the
invalid virtual address to the user.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5023 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5021 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5000 c046a42c-6fe2-441c-8c8c-71466251a162

This patch allows to display the "Password:" prompt if we use encrypted
disk with "-nographic" option.

It also modifies management of "-nographic" to not override user's
choices for "-serial", "-parallel" and "-monitor".

When qemu has to ask a password with "-nographic" with a multiplexed
serial interface, it forces the focus to the monitor and restore
original focus after.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4979 c046a42c-6fe2-441c-8c8c-71466251a162

This patch repairs the management of encrypted disk images and allows to
enter the password.

Changelog:
v2:
- move read_password() before do_loadvm()
- really start monitor if output is stdio.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4976 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4794 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4774 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4763 c046a42c-6fe2-441c-8c8c-71466251a162

(Chris Wright)

CVE-2008-1945


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4747 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4703 c046a42c-6fe2-441c-8c8c-71466251a162

Current key injection via the monitor basically generates no key hold
time. This is fine for keyboard emulations that have their own queues,
but it causes troubles for those how don't (like the MusicPal - it
simply does not work with injected keys). Moreover, I would like to use
this mechanism to simulate pressed buttons during power-up.

Therefore, this patch enhances the key injection with a configurable
release delay (by default 100 virtual milliseconds).

This feature allows to get rid of the initial sleep() in musicpal_init
because one can now simply start qemu with -S and issue "sendkey m 1000"
and "continue" in the monitor to achieve the desired effect of a pressed
menu button during power-up. So there is no need for a per-musicpal or
even qemu-wide "-hold-button" switch.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4701 c046a42c-6fe2-441c-8c8c-71466251a162

Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:

(qemu) sendkey alt-sysrq-t

Tested on x86-64 target and Linux guest.
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4658 c046a42c-6fe2-441c-8c8c-71466251a162

Looking at the sendkey implementation, planning to enhance it with a
hold time argument, I found some potential out-of-bound access and not
very readable code. Here is a fix for the former and a (subjective)
improvement of the latter.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4657 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4609 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4568 c046a42c-6fe2-441c-8c8c-71466251a162

(Gildas Le Nadan)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4333 c046a42c-6fe2-441c-8c8c-71466251a162

(Jan Kiszka)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4271 c046a42c-6fe2-441c-8c8c-71466251a162

(Stuart Brady)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4198 c046a42c-6fe2-441c-8c8c-71466251a162

(Marvin Flumm)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4195 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3976 c046a42c-6fe2-441c-8c8c-71466251a162