Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

A new option, -nodefconfig is introduced to prevent loading from the default
config location.  Otherwise, two configuration files will be searched for,
qemu.conf and target-<TARGET_NAME>.conf.

To ensure that the default configuration is overridden by a user specified
config, we introduce a two stage option parsing mechanism.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The default value is ${prefix}/etc/qemu.  --sysconfdir can be used to override
the default to an absolute path.  The expectation is that when installed to
/usr, --sysconfdir=/etc/qemu will be used.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to Sun4M System Architecture Manual chapter 5.3.2, a limit
of 0 will not generate interrupts.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 930c8682 introduced a regression to eth_send: eth_tx_desc_put
manipulates the host's tx descriptor copy before writing it back, but
two lines down the descriptor is evaluated again, leaving us with an
invalid next address if host and guest endianness differ. So this was
the actual issue commit 2e87c5b9 tried to paper over.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

Commit b3a21988 uncovered that we attached the Wolfson with an I2C
address shifted left by one. Fixing this makes sound work again for
the Musicpal.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

fix a potential null pointer dereference introduced in
commit	576c2cdcSigned-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Byte swap PCI config values.

Remove old bogus PCI config mechanism so that device 0:0.0 can be probed.
This requires OpenBIOS r667.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reverts commit 0076bc0c.

Kevin Wolf pointed out that this breaks the mingw32 build.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes mingw32 build out of tree.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Windows 7 BSODs under load with HAL_RTC_IRQF_WILL_NOT_CLEAR error.

It happens here:
hal!HalpRtcUnmaskClock:
8281b93a 8bff            mov     edi,edi
8281b93c 56              push    esi
8281b93d 33f6            xor     esi,esi
8281b93f 6a0c            push    0Ch
8281b941 e8b2ffffff      call    hal!CMOS_READ (8281b8f8)
8281b946 84c0            test    al,al
8281b948 7920            jns     hal!HalpRtcUnmaskClock+0x30 (8281b96a)
8281b94a 6a0a            push    0Ah
8281b94c 46              inc     esi
8281b94d e854c8ffff      call    hal!KeStallExecutionProcessor (828181a6)
8281b952 83fe64          cmp     esi,64h
8281b955 72e8            jb      hal!HalpRtcUnmaskClock+0x5 (8281b93f)
8281b957 6a00            push    0
8281b959 6a00            push    0
8281b95b 6a00            push    0
8281b95d 680a010000      push    10Ah
8281b962 6a5c            push    5Ch
8281b964 ff1500c38082    call    dword ptr [hal!_imp__KeBugCheckEx (8280c300)]
8281b96a 5e              pop     esi
8281b96b c3              ret

So it loops for 100(64h) times reading register C before BSOD. Lets
reduce number of immediate reinjection well under this limit.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we go over the maximum number of iovecs support by syscall we get
back EINVAL from the kernel which translate to I/O errors for the guest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit f039a563 introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.

The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.

The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Returning "????" is a bit meaningless, let's call it "unknown".
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So that it can be used by other subsystems.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit enables the use of MSI interrupts for virtqueue
notifications for ports. We use nr_ports + 1 (for control channel) msi
entries for the ports, as only the in_vq operations need an interrupt on
the guest.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit adds a simple chardev-based serial port. Any data the guest
sends is forwarded to the chardev and vice-versa.

Sample uses for such a device can be obtaining info from the guest like
the file systems used, apps installed, etc. for offline usage and
logged-in users, clipboard copy-paste, etc. for online usage.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The port 'id' or number is internal state between the guest kernel and
our bus implementation. This is invocation-dependent and isn't part of
the guest-host ABI.

To correcly enumerate and map ports between the host and the guest, the
'name' property is used.

Example:

    -device virtserialport,name=org.qemu.port.0

This invocation will get us a char device in the guest at:

    /dev/virtio-ports/org.qemu.port.0

which can be a symlink to

    /dev/vport0p3

This 'name' property is exposed by the guest kernel in a sysfs
attribute:

    /sys/kernel/virtio-ports/vport0p3/name

A simple udev script can pick up this name and create the symlink
mentioned above.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Via control channel messages, the guest can tell us whether a port got
opened or closed. Similarly, we can also indicate to the guest of host
port open/close events.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.

The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.

This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.

As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using

    -virtioconsole ...

is maintained, but the new, preferred way is to use

    -device virtio-serial -device virtconsole,chardev=...

With this commit, multiple devices as well as multiple ports with a
single device can be supported.

For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.

In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.

This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

VIRTIO_PCI_QUEUE_MAX is redefined in hw/virtio.c. Let's just keep it in
hw/virtio.h.

Also, bump up the value of the maximum allowed virtqueues to 64. This is
in preparation to allow multiple ports per virtio-console device.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE.

Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The command line options -device, -nodefaults, -readconfig,
-writeconfig had entries for command line help, but
documentation for texi and derived formats (man, html, info)
was missing.

This also required moving "@end table" to the end of
qemu-options.hx again.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds compat property entries for ide-disk.ver and
scsi-disk.ver to pc-0.10 and pc-0.11.  With this patch applied
the scsi and ide disks report "0.10" and "0.11" as version when
you start qemu with "-M pc-0.10" or "-M pc-0.11".
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a new property named 'ver' to scsi-disk which allows to
specify the version which the virtual disk/cdrom should report to the
guest.  By default this is the qemu version (i.e. 0.12).  usage:

  -drive if=none,id=disk,file=...
  -device lsi
  -device scsi-disk,drive=disk,bus=scsi.0,unit=0,ver=42

You can also switch the version for all scsi drives using:

  -global scsi-disk.ver=42
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a new property named 'ver' to ide-drive which allows to
specify the version which the virtual disk/cdrom should report to the
guest.  By default this is the qemu version (i.e. 0.12).  usage:

  -drive if=none,id=disk,file=...
  -device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42

You can also switch the version for all ide drives using:

  -global ide-drive.ver=42
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon.  If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.

To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is
conditional on a define from config-host.h which is included only later.
Include that file earlier to get the warnings back.

Reactivating it unfortunately leads to some warnings about unused qdev_init
results. These calls are changed to qdev_init_nofail to avoid build failures.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.

Event example:

{ "event": "VNC_INITIALIZED",
    "timestamp": {"seconds": 1263475302, "microseconds": 150772},
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0"},
        "client": { "family": "ipv4", "service": "46089",
                    "host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client disconnects from QEMU, client's
information such as port and IP address are provided.

Event example:

{ "event": "VNC_DISCONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1", "sasl_username": "foo" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.

Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.

Event example:

{ "event": "VNC_CONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a disconnection happens the client's socket on QEMU
side may become invalid, this way it won't be possible
to query it to get client information, which is going to
be needed by the future QMP VNC_DISCONNECTED event.

To always have this information available we query the
socket at connection time and cache the client info in
struct VncState.

Two function are introduced to perform this job.

vnc_client_cache_addr() is called right when the connection
is made, however the authentication information is not
available at that moment so vnc_client_cache_auth() is
called from protocol_client_init() to get auth info.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>