This allows to execute from the lqspi area.

When the request_ptr is called the device loads 1024bytes from the SPI device.
Then this code can be executed by the guest.
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This introduces a special callback which allows to run code from some MMIO
devices.

SysBusDevice with a MemoryRegion which implements the request_ptr callback will
be notified when the guest try to execute code from their offset. Then it will
be able to eg: pre-load some code from an SPI device or ask a pointer from an
external simulator, etc..

When the pointer or the data in it are no longer valid the device has to
invalidate it.
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This introduces mmio_interface object which contains a MemoryRegion
and can be hotplugged/hotunplugged.
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

We need to pass a pointer to a MemoryRegion for mmio_interface.
So this just adds that.
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

get_page_addr_code(..) does a cpu_ldub_code to fill the tlb:
This can lead to some side effects if a device is mapped at this address.

So this patch replaces the cpu_memory_ld by a tlb_fill.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This just moves the code before VICTIM_TLB_HIT macro definition
so we can use it.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This replaces env1 and page_index variables by env and index
so we can use VICTIM_TLB_HIT macro later.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Block layer patches

# gpg: Signature made Mon 26 Jun 2017 14:07:32 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (60 commits)
  qemu-img: don't shadow opts variable in img_dd()
  block: Do not strcmp() with NULL uri->scheme
  blkverify: Catch bs->exact_filename overflow
  blkdebug: Catch bs->exact_filename overflow
  fix: avoid an infinite loop or a dangling pointer problem in img_commit
  block: change variable names in BlockDriverState
  block: Remove bdrv_aio_readv/writev/flush()
  qed: Use bdrv_co_* for coroutine_fns
  qed: Add coroutine_fn to I/O path functions
  qed: Use a coroutine for need_check_timer
  qed: Simplify request handling
  qed: Use CoQueue for serialising allocations
  qed: Implement .bdrv_co_readv/writev
  qed: Remove recursion in qed_aio_next_io()
  qed: Remove ret argument from qed_aio_next_io()
  qed: Add return value to qed_aio_read/write_data()
  qed: Add return value to qed_aio_write_inplace/alloc()
  qed: Add return value to qed_aio_write_cow()
  qed: Add return value to qed_aio_write_main()
  qed: Add return value to qed_aio_write_l2_update()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches for the block queue

# gpg: Signature made Mon Jun 26 14:56:24 2017 CEST
# gpg:                using RSA key 0xF407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* mreitz/tags/pull-block-2017-06-26:
  qemu-img: don't shadow opts variable in img_dd()
  block: Do not strcmp() with NULL uri->scheme
  blkverify: Catch bs->exact_filename overflow
  blkdebug: Catch bs->exact_filename overflow
  fix: avoid an infinite loop or a dangling pointer problem in img_commit
  block: change variable names in BlockDriverState
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's confusing when two different variables have the same name in one
function.

Cc: Reda Sallahi <fullmanet@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170619150002.3033-1-stefanha@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

uri_parse(...)->scheme may be NULL. In fact, probably every field may be
NULL, and the callers do test this for all of the other fields but not
for scheme (except for block/gluster.c; block/vxhs.c does not access
that field at all).

We can easily fix this by using g_strcmp0() instead of strcmp().

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-id: 20170613205726.13544-1-mreitz@redhat.com
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

The bs->exact_filename field may not be sufficient to store the full
blkverify node filename. In this case, we should not generate a filename
at all instead of an unusable one.

Cc: qemu-stable@nongnu.org
Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-id: 20170613172006.19685-3-mreitz@redhat.com
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

The bs->exact_filename field may not be sufficient to store the full
blkdebug node filename. In this case, we should not generate a filename
at all instead of an unusable one.

Cc: qemu-stable@nongnu.org
Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Message-id: 20170613172006.19685-2-mreitz@redhat.com
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

img_commit could fall into an infinite loop calling run_block_job() if
its blockjob fails on any I/O error, fix this already known problem.
Signed-off-by: Nsochin.jiang <sochin.jiang@huawei.com>
Message-id: 1497509253-28941-1-git-send-email-sochin.jiang@huawei.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

These functions are unused now.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

All functions that are marked coroutine_fn can directly call the
bdrv_co_* version of functions instead of going through the wrapper.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that we stay in coroutine context for the whole request when doing
reads or writes, we can add coroutine_fn annotations to many functions
that can do I/O or yield directly.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes the last place where we degraded from AIO to actual blocking
synchronous I/O requests. Putting it into a coroutine means that instead
of blocking, the coroutine simply yields while doing I/O.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that we process a request in the same coroutine from beginning to
end and don't drop out of it any more, we can look like a proper
coroutine-based driver and simply call qed_aio_next_io() and get a
return value from it instead of spawning an additional coroutine that
reenters the parent when it's done.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that we're running in coroutine context, the ad-hoc serialisation
code (which drops a request that has to wait out of coroutine context)
can be replaced by a CoQueue.

This means that when we resume a serialised request, it is running in
coroutine context again and its I/O isn't blocking any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Most of the qed code is now synchronous and matches the coroutine model.
One notable exception is the serialisation between requests which can
still schedule a callback. Before we can replace this with coroutine
locks, let's convert the driver's external interfaces to the coroutine
versions.

We need to be careful to handle both requests that call the completion
callback directly from the calling coroutine (i.e. fully synchronous
code) and requests that involve some callback, so that we need to yield
and wait for the completion callback coming from outside the coroutine.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of calling itself recursively as the last thing, just convert
qed_aio_next_io() into a loop.

This patch is best reviewed with 'git show -w' because most of it is
just whitespace changes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

All callers pass ret = 0, so we can just remove it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.

While refactoring qed_aio_write_alloc() to accomodate the change,
qed_aio_write_zero_cluster() ended up with a single line, so I chose to
inline that line and remove the function completely.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

qed_commit_l2_update() is unconditionally called at the end of
qed_aio_write_l1_update(). Inline it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

The GenericCB infrastructure isn't used any more. Remove it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

With this change, qed_aio_write_prefill() and qed_aio_write_postfill()
collapse into a single function. This is reflected by a rename of the
combined function to qed_aio_write_cow().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>