DELAY_SLOT_TRUE is used as a dynamic condition for the branch after the
delay slot instruction. It is not used in code generation, so there is
no need to including in the TB state.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that ctx->flags has been split, it becomes clear that
DELAY_SLOT_CLEARME has not impact on the code generation: in both case
ctx->envflags is cleared, either by clearing all the flags, or by
setting it to 0. This is left-over from pre-TCG era.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There is a confusion (and not only in the SH4 target) between tb->flags,
env->flags and ctx->flags. To avoid it, split ctx->flags into
ctx->tbflags and ctx->envflags. ctx->tbflags stays unchanged during the
whole TB translation, while ctx->envflags evolves and is kept in sync
with env->flags using TCG instructions. ctx->envflags now only contains
the part that of env->flags that is contained in the TB state, i.e. the
DELAY_SLOT* flags.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

I volunteer to review linux-user patches.
Adding myself will help to not miss some of them.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Message-id: 20170510153950.29343-1-laurent@vivier.eu
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

trivial patches for 2017-05-10

# gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* mjt/tags/trivial-patches-fetch: (23 commits)
  tests: Remove redundant assignment
  MAINTAINERS: Update paths for AioContext implementation
  MAINTAINERS: Update paths for main loop
  jazz_led: fix bad snprintf
  tests: Ignore another built executable (test-hmp)
  scripts: Switch to more portable Perl shebang
  scripts/qemu-binfmt-conf.sh: Fix shell portability issue
  virtfs: allow a device id to be specified in the -virtfs option
  hw/core/generic-loader: Fix crash when running without CPU
  virtio-blk: Remove useless condition around g_free()
  qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip
  use _Static_assert in QEMU_BUILD_BUG_ON
  channel-file: fix wrong parameter comments
  block: Make 'replication_state' an enum
  util: Use g_malloc/g_free in envlist.c
  qga: fix compiler warnings (clang 5)
  device_tree: fix compiler warnings (clang 5)
  usb-ccid: make ccid_write_data_block() cope with null buffers
  tests: Ignore more test executables
  Add 'none' as type for drive's if option
  ...
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Merge qcrypto 2017/05/09 v1

# gpg: Signature made Tue 09 May 2017 09:43:47 AM EDT
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* danpb/tags/pull-qcrypto-2017-05-09-1:
  crypto: qcrypto_random_bytes() now works on windows w/o any other crypto libs
  crypto: move 'opaque' parameter to (nearly) the end of parameter list
  List SASL config file under the cryptography maintainer's realm
  Default to GSSAPI (Kerberos) instead of DIGEST-MD5 for SASL
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Moved by c2b38b27
("block: move AioContext, QEMUTimer, main-loop to libqemuutil")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Moved by c2b38b27 ("block: move AioContext, QEMUTimer, main-loop to
libqemuutil"), let's update MAINTAINERS too.
Reported-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Detected by GCC 7's -Wformat-truncation.  snprintf writes at most
2 bytes here including the terminating NUL, so the result is
truncated.  In addition, the newline at the end is pointless.
Fix the buffer size and the format string.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit 78f86a2b added a new test, but forgot to exclude the built
binary from version control.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.

This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.

This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
Signed-off-by: NKamil Rytarowski <n54@gmx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Appease pkgsrc and use portable shell variable comparison.
This switches "==" to "=". It should not be a functional change.
Signed-off-by: NKamil Rytarowski <n54@gmx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When using a virtfs root filesystem, the mount_tag needs to be set to
/dev/root. This can be done long-hand as

  -fsdev local,id=root,path=/path/to/rootfs,...
  -device virtio-9p-pci,fsdev=root,mount_tag=/dev/root

but the -virtfs shortcut cannot be used as it hard-codes the device identifier
to match the mount_tag, and device identifiers may not contain '/':

  $ qemu-system-x86_64 -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough
  qemu-system-x86_64: -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough: duplicate fsdev id: /dev/root

To support this case using -virtfs, we allow the device identifier to be
specified explicitly when the mount_tag is not suitable:

  -virtfs local,id=root,path=/path/to/rootfs,mount_tag=/dev/root,...
Signed-off-by: NChris Webb <chris@arachsys.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When running QEMU with "-M none -device loader,file=kernel.elf", it
currently crashes with a segmentation fault, because the "none"-machine
does not have any CPU by default and the generic loader code tries
to dereference s->cpu. Fix it by adding an appropriate check for a
NULL pointer.
Reported-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Laszlo spotted and studied this wasteful "if". He pointed out:

The original virtio_blk_free_request needed an "if" as it accesses one
field, since 671ec3f0 ("virtio-blk: Convert VirtIOBlockReq.elem to
pointer", 2014-06-11); later on in f897bf75 ("virtio-blk: embed
VirtQueueElement in VirtIOBlockReq", 2014-07-09) the field became
embedded, so the "if" became unnecessary (at which point we were using
g_slice_free(), but it is the same.

Now drop it.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

There are some broken URLs in the qemu-doc which reference tools that
are not available at their original location anymore. Fortunately, they
have been mirrored to archive.org, so point to that location instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.

We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.

That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.

the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:

without _Static_assert:

> In file included from /qemu/include/qemu/osdep.h:36:0,
>                  from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
>      struct { \
>             ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro  QEMU_BUILD_BUG_ON_STRUCT’
>  #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
>                                       ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
>      QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *));   \
>      ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
>      atomic_load_acquire(ptr)
>      ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
>      bool finished = atomic_mb_read(&gei->finished);
>                      ^~~~~~~~~~~~~~

with _Static_assert:

> In file included from /qemu/include/qemu/osdep.h:36:0,
>                  from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
>  #define QEMU_BUILD_BUG_ON(x) _Static_assert(!(x), #x)
>                               ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
>      QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *));   \
>      ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
>      atomic_load_acquire(ptr)
>      ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
>      bool finished = atomic_mb_read(&gei->finished);
>                      ^~~~~~~~~~~~~~
Signed-off-by: NAndreas Grapentin <andreas@grapentin.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: Nsochin.jiang <sochin@aliyun.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

QAPI patches for 2017-05-04

# gpg: Signature made Tue 09 May 2017 03:16:12 AM EDT
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* armbru/tags/pull-qapi-2017-05-04-v3: (28 commits)
  qmp-shell: improve help
  qmp-shell: don't show version greeting if unavailable
  qmp-shell: Cope with query-commands error
  qmp-shell: add -N option to skip negotiate
  qmp-shell: add persistent command history
  qobject-input-visitor: Catch misuse of end_struct vs. end_list
  qapi: Document intended use of @name within alternate visits
  qobject-input-visitor: Document full_name_nth()
  qmp: Improve QMP dispatch error messages
  sockets: Delete unused helper socket_address_crumple()
  sockets: Limit SocketAddressLegacy to external interfaces
  sockets: Rename SocketAddressFlat to SocketAddress
  sockets: Rename SocketAddress to SocketAddressLegacy
  qapi: New QAPI_CLONE_MEMBERS()
  sockets: Prepare inet_parse() for flattened SocketAddress
  sockets: Prepare vsock_parse() for flattened SocketAddress
  test-qga: Actually test 0xff sync bytes
  fdc-test: Avoid deprecated 'change' command
  QemuOpts: Simplify qemu_opts_to_qdict()
  block: Simplify bdrv_append_temp_snapshot() logic
  ...
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If no crypto library is included in the build, QEMU uses
qcrypto_random_bytes() to generate random data. That function tried to open
/dev/urandom or /dev/random and if opening both files failed it errored out.

Those files obviously do not exist on windows, so there the code uses
CryptGenRandom().

Furthermore there was some refactoring and a new function
qcrypto_random_init() was introduced. If a proper crypto library (gnutls or
libgcrypt) is included in the build, this function does nothing. If neither
is included it initializes the (platform specific) handles that are used by
qcrypto_random_bytes().
Either:
* a handle to /dev/urandom | /dev/random on unix like systems
* a handle to a cryptographic service provider on windows
Signed-off-by: NGeert Martin Ijewski <gm.ijewski@web.de>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Previous commit moved 'opaque' to be the 2nd parameter in the list:

  commit 37509233
  Author: Fam Zheng <famz@redhat.com>
  Date:   Fri Apr 21 20:27:02 2017 +0800

    crypto: Make errp the last parameter of functions

    Move opaque to 2nd instead of the 2nd to last, so that compilers help
    check with the conversion.

this puts it back to the 2nd to last position.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

No one is listed as maintainer for qemu.sasl. It is used by the
VNC server for SASL auth, but since it is cryptography related,
list it under the crytography maintainer's realm, rather than
under the UI maintainer.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, QEMU should not be
using or recommending it as a default mechanism for VNC auth
with SASL.

GSSAPI (Kerberos) is the only other viable SASL mechanism that
can provide secure session encryption so enable that by defalt
as the replacement. If users have TLS enabled for VNC, they can
optionally decide to use SCRAM-SHA-1 instead of GSSAPI, allowing
plain username and password auth.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Describe the arguments & fix the tool name.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170504125432.21653-5-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

qemu-ga doesn't have greeting.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170504125432.21653-4-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

qemu-ga doesn't implement it.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170504125432.21653-3-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

qemu-ga doesn't have negotiate phase.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170504125432.21653-2-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Use the existing readline history function we are utilizing
to provide persistent command history across instances of qmp-shell.

This assists entering debug commands across sessions that may be
interrupted by QEMU sessions terminating, where the qmp-shell has
to be relaunched.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-Id: <20170427223628.20893-1-jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NKashyap Chamarthy <kchamart@redhat.com>
Tested-by: NKashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493282486-28338-5-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
[More elaborate assertions for clarity]

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493282486-28338-4-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493282486-28338-3-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <1493282486-28338-2-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-8-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Commit message typo fixed]

SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C.  SocketAddress is the
equivalent flat union.  Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.

See also commit fce5d538..9445673e and 85a82e85..c5f1ae3a.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>

The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.

Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

QAPI_CLONE() returns a newly allocated QAPI object.  Inconvenient when
we want to clone into an existing object.  QAPI_CLONE_MEMBERS() does
exactly that.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-4-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.

inet_parse() returns a newly allocated InetSocketAddress.  Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Straightforward rebase]

I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.

vsock_parse() returns a newly allocated VsockSocketAddress.  Lift the
allocation from vsock_parse() into its caller socket_parse() to
prepare for flattening SocketAddress.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-2-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>