Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <20180217235920.2254-1-laurent@vivier.eu>

tricore patches

# gpg: Signature made Fri 02 Mar 2018 10:59:26 GMT
# gpg:                using RSA key 0AD2C6396B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E  6E37 0AD2 C639 6B69 CA14

* remotes/bkoppelmann/tags/pull-tricore-2018-03-02:
  tricore: renamed masking of PIE
  tricore: renamed masking of IE
  tricore: added CORE_ID
  tricore: added some missing cpu instructions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * implement FCMA and RDM v8.1 and v8.3 instructions
 * enable Cortex-M33 v8M core, and provide new mps2-an505 board model
   that uses it
 * decodetree: Propagate return value from translate subroutines
 * xlnx-zynqmp: Implement the RTC device

# gpg: Signature made Fri 02 Mar 2018 11:05:40 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180302: (39 commits)
  target/arm: Enable ARM_FEATURE_V8_FCMA
  target/arm: Decode t32 simd 3reg and 2reg_scalar extension
  target/arm: Decode aa32 armv8.3 2-reg-index
  target/arm: Decode aa32 armv8.3 3-same
  target/arm: Decode aa64 armv8.3 fcmla
  target/arm: Decode aa64 armv8.3 fcadd
  target/arm: Add ARM_FEATURE_V8_FCMA
  target/arm: Enable ARM_FEATURE_V8_RDM
  target/arm: Decode aa32 armv8.1 two reg and a scalar
  target/arm: Decode aa32 armv8.1 three same
  target/arm: Decode aa64 armv8.1 scalar/vector x indexed element
  target/arm: Decode aa64 armv8.1 three same extra
  target/arm: Decode aa64 armv8.1 scalar three same extra
  target/arm: Refactor disas_simd_indexed size checks
  target/arm: Refactor disas_simd_indexed decode
  target/arm: Add ARM_FEATURE_V8_RDM
  mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image
  hw/arm/iotkit: Model Arm IOT Kit
  hw/misc/iotkit-secctl: Add remaining simple registers
  hw/misc/iotkit-secctl: Add handling for PPCs
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

nbd patches for 2018-03-01

- Eric Blake: nbd: Honor server's advertised minimum block size
- Vladimir Sementsov-Ogievskiy: partial: nbd block status base:allocation

# gpg: Signature made Thu 01 Mar 2018 21:01:22 GMT
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2018-03-01:
  nbd/client: fix error messages in nbd_handle_reply_err
  nbd: BLOCK_STATUS constants
  nbd: change indenting in nbd.h
  nbd: Honor server's advertised minimum block size
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Enable it for the "any" CPU used by *-linux-user.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180228193125.20577-17-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Happily, the bits are in the same places compared to a32.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-16-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-15-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180228193125.20577-14-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-13-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: renamed e1/e2/e3/e4 to use the same naming as the version
 of the pseudocode in the Arm ARM]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-12-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Not enabled anywhere yet.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-11-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Enable it for the "any" CPU used by *-linux-user.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180228193125.20577-10-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-9-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-8-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-7-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-6-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-5-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The integer size check was already outside of the opcode switch;
move the floating-point size check outside as well.  Unify the
size vs index adjustment between fp and integer paths.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180228193125.20577-4-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Include the U bit in the switches rather than testing separately.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180228193125.20577-3-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Not enabled anywhere yet.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-2-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Define a new board model for the MPS2 with an AN505 FPGA image
containing a Cortex-M33. Since the FPGA images for TrustZone
cores (AN505, and the similar AN519 for Cortex-M23) have a
significantly different layout of devices to the non-TrustZone
images, we use a new source file rather than shoehorning them
into the existing mps2.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-20-peter.maydell@linaro.org

Model the Arm IoT Kit documented in
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html

The Arm IoT Kit is a subsystem which includes a CPU and some devices,
and is intended be extended by adding extra devices to form a
complete system.  It is used in the MPS2 board's AN505 image for the
Cortex-M33.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-19-peter.maydell@linaro.org

Add remaining easy registers to iotkit-secctl:
 * NSCCFG just routes its two bits out to external GPIO lines
 * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's
   bus fabric can never report errors
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180220180325.29818-18-peter.maydell@linaro.org

The IoTKit Security Controller includes various registers
that expose to software the controls for the Peripheral
Protection Controllers in the system. Implement these.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-17-peter.maydell@linaro.org

The Arm IoT Kit includes a "security controller" which is largely a
collection of registers for controlling the PPCs and other bits of
glue in the system.  This commit provides the initial skeleton of the
device, implementing just the ID registers, and a couple of read-only
read-as-zero registers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-16-peter.maydell@linaro.org

Add a model of the TrustZone peripheral protection controller (PPC),
which is used to gate transactions to non-TZ-aware peripherals so
that secure software can configure them to not be accessible to
non-secure software.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-15-peter.maydell@linaro.org

The MPS2 AN505 FPGA image includes a "FPGA control block"
which is a small set of registers handling LEDs, buttons
and some counters.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-14-peter.maydell@linaro.org

In some board or SoC models it is necessary to split a qemu_irq line
so that one input can feed multiple outputs.  We currently have
qemu_irq_split() for this, but that has several deficiencies:
 * it can only handle splitting a line into two
 * it unavoidably leaks memory, so it can't be used
   in a device that can be deleted

Implement a qdev device that encapsulates splitting of IRQs, with a
configurable number of outputs.  (This is in some ways the inverse of
the TYPE_OR_IRQ device.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-13-peter.maydell@linaro.org

The function qdev_init_gpio_in_named() passes the DeviceState pointer
as the opaque data pointor for the irq handler function.  Usually
this is what you want, but in some cases it would be helpful to use
some other data pointer.

Add a new function qdev_init_gpio_in_named_with_opaque() which allows
the caller to specify the data pointer they want.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-12-peter.maydell@linaro.org

The or-irq.h header file is missing the customary guard against
multiple inclusion, which means compilation fails if it gets
included twice. Fix the omission.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-11-peter.maydell@linaro.org

Move the definition of the struct for the unimplemented-device
from unimp.c to unimp.h, so that users can embed the struct
in their own device structs if they prefer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-10-peter.maydell@linaro.org

Add a Cortex-M33 definition. The M33 is an M profile CPU
which implements the ARM v8M architecture, including the
M profile Security Extension.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-9-peter.maydell@linaro.org

Create an "init-svtor" property on the armv7m container
object which we can forward to the CPU object.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-8-peter.maydell@linaro.org

The Cortex-M33 allows the system to specify the reset value of the
secure Vector Table Offset Register (VTOR) by asserting config
signals. In particular, guest images for the MPS2 AN505 board rely
on the MPS2's initial VTOR being correct for that board.
Implement a QEMU property so board and SoC code can set the reset
value to the correct value.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-7-peter.maydell@linaro.org

Create an "idau" property on the armv7m container object which
we can forward to the CPU object. Annoyingly, we can't use
object_property_add_alias() because the CPU object we want to
forward to doesn't exist until the armv7m container is realized.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-6-peter.maydell@linaro.org

In v8M, the Implementation Defined Attribution Unit (IDAU) is
a small piece of hardware typically implemented in the SoC
which provides board or SoC specific security attribution
information for each address that the CPU performs MPU/SAU
checks on. For QEMU, we model this with a QOM interface which
is implemented by the board or SoC object and connected to
the CPU using a link property.

This commit defines the new interface class, adds the link
property to the CPU object, and makes the SAU checking
code call the IDAU interface if one is present.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-5-peter.maydell@linaro.org

Instead of loading guest images to the system address space, use the
CPU's address space.  This is important if we're trying to load the
file to memory or via an alias memory region that is provided by an
SoC object and thus not mapped into the system address space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-4-peter.maydell@linaro.org

Instead of loading kernels, device trees, and the like to
the system address space, use the CPU's address space. This
is important if we're trying to load the file to memory or
via an alias memory region that is provided by an SoC
object and thus not mapped into the system address space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-3-peter.maydell@linaro.org

Add a function load_ramdisk_as() which behaves like the existing
load_ramdisk() but allows the caller to specify the AddressSpace
to use. This matches the pattern we have already for various
other loader functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-2-peter.maydell@linaro.org

Allow the translate subroutines to return false for invalid insns.

At present we can of course invoke an invalid insn exception from within
the translate subroutine, but in the short term this consolidates code.
In the long term it would allow the decodetree language to support
overlapping patterns for ISA extensions.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180227232618.2908-1-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>