This introduces utility functions for the APIC ID calculation, based on:
  Intel® 64 Architecture Processor Topology Enumeration
  http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/

The code should be compatible with AMD's "Extended Method" described at:
  AMD CPUID Specification (Publication #25481)
  Section 3: Multiple Core Calcuation
as long as:
 - nr_threads is set to 1;
 - OFFSET_IDX is assumed to be 0;
 - CPUID Fn8000_0008_ECX[ApicIdCoreIdSize[3:0]] is set to
   apicid_core_width().

Unit tests included.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This changes FW_CFG_MAX_CPUS and FW_CFG_NUMA to use apic_id_for_cpu(),
so the NUMA table can be based on the APIC IDs, instead of CPU index
(SeaBIOS knows nothing about CPU indexes, just APIC IDs).
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The code that calculates the APIC ID will use smp_cores/smp_threads, so
just define them as 1 on *-user to avoid #ifdefs in the code.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

PC will not use max_cpus for that field, so move it outside the common
code so it can use a different value on PC.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This function will be used by both the CPU initialization code and the
fw_cfg table initialization code.

Later this function will be updated to generate APIC IDs according to
the CPU topology.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The CPU ID in KVM is supposed to be the APIC ID, so change the
KVM_CREATE_VCPU call to match it. The current behavior didn't break
anything yet because today the APIC ID is assumed to be equal to the CPU
index, but this won't be true in the future.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Currently, the pc-1.4 machine init function enables PV EOI and then
calls the pc-1.2 machine init function. The problem with this approach
is that now we can't enable any additional compatibility code inside the
pc-1.2 init function because it would end up enabling the compatibility
behavior on pc-1.3 and pc-1.4 as well.

This reverses the logic so that the pc-1.2 machine init function will
disable PV EOI, and then call the pc-1.4 machine init function.

This way we can change older machine-types to enable compatibility
behavior, and the newer machine-types (pc-1.3, pc-q35-1.4 and
pc-i440fx-1.4) would just use the default behavior.

(This means that one nice side-effect of this change is that pc-q35-1.4
will get PV EOI enabled by default, too)

It would be interesting to eventually change pc_init_pci_no_kvmclock()
and pc_init_isa() to reuse pc_init_pci_1_2() as well (so we don't need
to duplicate compatibility code on those two functions). But this will
be probably much easier to do after we create a PCInitArgs struct for
the PC initialization arguments, and/or after we use global-properties
to implement the compatibility modes present in pc_init_pci_1_2().
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This is a cleanup that tries to solve two small issues:

 - We don't need a separate kvm_pv_eoi_features variable just to keep a
   constant calculated at compile-time, and this style would require
   adding a separate variable (that's declared twice because of the
   CONFIG_KVM ifdef) for each feature that's going to be
   enabled/disabled by machine-type compat code.
 - The pc-1.3 code is setting the kvm_pv_eoi flag on cpuid_kvm_features
   even when KVM is disabled at runtime. This small inconsistency in
   the cpuid_kvm_features field isn't a problem today because
   cpuid_kvm_features is ignored by the TCG code, but it may cause
   unexpected problems later when refactoring the CPUID handling code.

This patch eliminates the kvm_pv_eoi_features variable and simply uses
kvm_enabled() inside the enable_kvm_pv_eoi() compat function, so it
enables kvm_pv_eoi only if KVM is enabled. I believe this makes the
behavior of enable_kvm_pv_eoi() clearer and easier to understand.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Instead of calling openrisc_env_get_cpu(), casting to CPU() via the
ENV_GET_CPU() compatibility macro and casting back to OPENRISC_CPU(),
just call openrisc_env_get_cpu() directly.

ENV_GET_CPU() is meant as workaround for target-independent code only.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It was missed in 92a31361 (cpu:
Introduce CPUListState struct) because its naming did not match the
*CPUListState pattern. Use the generalized CPUListState instead.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Default to moving back to the IDLE state after the COLLECTING_DATA
state. For a well behaved guest this patch has no consequence, but
A bad guest could crash QEMU by using one of the erase commands
followed by a longer than 5 byte argument (undefined behaviour).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Software services a received packet by clearing the CTRL_S bit in the RX_CTRLn
register. If this bit is cleared, flush any packets queued for the device.
Reported-by: NJohn Williams <john.williams@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The eth_can_rx() function only checks the first buffers status ("ping"). The
controller should be able to receive into "pong" when ping-pong is enabled.
Checks the active buffer (either "ping" or "pong") when determining can_rx()
rather than just testing "ping".
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
  PPC: e500: Select MPIC v4.2 on ppce500 platform
  PPC: e500: fix mpic_iack address
  openpic: add basic support for MPIC v4.2
  openpic: fix timer address decoding
  openpic: fix remaining issues from idr-to-destmask conversion
  pseries: Adjust default VIO address allocations to play better with libvirt
  pseries: Improve handling of multiple PCI host bridges
  target-ppc: Give a meaningful error if too many threads are specified
  cuda: Move ADB bus into CUDA state
  adb: QOM'ify ADB devices
  adb: QOM'ify Apple Desktop Bus
  cuda: QOM'ify CUDA
  ide/macio: QOM'ify MacIO IDE
  mac_nvram: QOM'ify MacIO NVRAM
  mac_nvram: Mark as Big Endian
  mac_nvram: Clean up public API
  macio: Split MacIO in two
  macio: Delay qdev init until all fields are initialized
  macio: QOM'ify some more
  ppc: Move Mac machines to hw/ppc/

Since x86_64 is a superset of i386 and reuses all its test cases, adopt
all the i386 gcov source files as well, substituting their paths
appropriately.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

m48t59-test is individually being executed for sparc and sparc64, so add
the gcov source file for sparc64 as well.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 6e998903 introduced a new qtest
test case but misspelled gcov, leading to no coverage analysis. Fix it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This is a follow up for several attempts to fix this issue.

Previous incarnations:

1. http://thread.gmane.org/gmane.linux.ubuntu.bugs.general/3156089
https://bugs.launchpad.net/bugs/918791
"qemu-kvm dies when using vmvga driver and unity in the guest" bug.
Fix by Serge Hallyn:
 https://launchpadlibrarian.net/94916786/qemu-vmware.debdiff
This fix is incomplete, since it does not check width and height
for being negative.  Serge weren't sure if that's the right place
to fix it, maybe the fix should be up the stack somewhere.

2. http://thread.gmane.org/gmane.comp.emulators.qemu/166064
by Marek Vasut: "vmware_vga: Redraw only visible area"

This one adds the (incomplete) check to vmsvga_update_rect_delayed(),
the routine just queues the rect updating but does no interesting
stuff.  It is also incomplete in the same way as patch by Serge,
but also does not touch width&height at all after adjusting x&y,
which is wrong.

As far as I can see, when processing guest requests, the device
places them into a queue (vmsvga_update_rect_delayed()) and
processes this queue in different place/time, namely, in
vmsvga_update_rect().  Sometimes, vmsvga_update_rect() is
called directly, without placing the request to the gueue.
This is the place this patch changes, which is the last
(deepest) in the stack.  I'm not sure if this is the right
place still, since it is possible we have some queue optimization
(or may have in the future) which will be upset by negative/wrong
values here, so maybe we should check for validity of input
right when receiving request from the guest (and maybe even
use unsigned types there).  But I don't know the protocol
and implementation enough to have a definitive answer.

But since vmsvga_update_rect() has other sanity checks already,
I'm adding the missing ones there as well.

Cc'ing BALATON Zoltan and Andrzej Zaborowski who shows in `git blame'
output and may know something in this area.

If this patch is accepted, it should be applied to all active
stable branches (at least since 1.1, maybe even before), with
minor context change (ds_get_*(s->vga.ds) => s->*).  I'm not
Cc'ing -stable yet, will do it explicitly once the patch is
accepted.

BTW, these checks use fprintf(stderr) -- it should be converted
to something more appropriate, since stderr will most likely
disappear somewhere.

Cc: Marek Vasut <marex@denx.de>
CC: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform input tests on random data.

Improvement to code coverage for qapi/string-input-visitor.c
is about 3 percentage points.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

.lo files in stubs/, util/ and libcacard/ were not cleaned.
Fix this.

Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Align the device tree blob to a 4KB boundary, not to QEMU's
idea of a page boundary -- the latter is the smallest possible
page size for the architecture, which on ARM is 1KB.
The documentation for Linux does not impose separation
or alignment requirements on the device tree blob, but
in practice some kernels will happily trash the entire
page the initrd ends in after they have finished uncompressing
the initrd. So 4KB-align the DTB to ensure it does not get
trampled by these kernels.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid unused variable warnings:
qemu-char.c: In function 'qmp_chardev_open_port':
qemu-char.c:3132: warning: unused variable 'fd'
qemu-char.c:3132: warning: unused variable 'flags'

in configurations with neither HAVE_CHARDEV_TTY nor
HAVE_CHARDEV_PARPORT set.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

config-devices.mak.d is included from Makefile.target, i.e. from inside
the *-softmmu/ directory. It included the directory path, so never
applied to the actual ./config-devices.mak. Symptoms were spurious
build failures due to missing dependency on default-configs/pci.mak.

Fix this by using `basename` to strip the directory path.
Reported-by: NGerhard Wiesinger <lists@wiesinger.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.

No problem on machines where sizeof(size_t) == sizeof(int).

Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).

I'd expect it to break on a 64 bit big-endian box.

Fix up the variable types and drop the problematic cast.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Honour float_muladd_negate_c in the case where the product is zero and
c is nonzero.  Previously we would fail to negate c.

Seen in (and tested against) the gfortran testsuite on MIPS.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
    case THINGY_3: idx++;
    case THINGY_2: idx++;
    case THINGY_1: idx++;
    case THINGY_0: return s->thingy[idx];

This makes static analysers happy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit 'return' statement to a case in smc91c111_readb
rather than relying on fallthrough to the following case's
return statement, for code clarity and to placate static analysers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Mark the deliberate fallthrough where we treat the case of
an attempt to read flash when it is an unknown command
state as if it were a normal read.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
  case THINGY_3: idx++;
  case THINGY_2: idx++;
  case THINGY_1: idx++;
  case THINGY_0: return s->thingy[idx];

This makes static analysers happy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Explicitly mark cases where we are deliberately falling
through to the following code. In one case we insert a
'break' instead of falling through to a 'break', as this
seems slightly clearer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add some break statements that were accidentally omitted
from some cases of arm_sysctl_write(). The omission was
harmless because in both cases the following case did
an immediate break, but adding the breaks explicitly
placates static analysers and avoids weird behaviour if
the following register is ever implemented as something
other than a no-op.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Now, if seccomp is detected, it is linked into every executable,
but is used only by softmmu targets (from vl.c).  So link it
only where it is actually needed.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename qemu_vmalloc() to bsd_vmalloc(), adjust the only user.

Remove #ifdeffery in oslib-posix.c.
Tested-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

extra-obj-y is somewhat complicated to understand.  Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile.  This is similar to how
we define symbols for hardware components.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>