Wire up virtio-crypto for the CCW based VIRTIO.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

As a preparation for wiring-up virtio-crypto, the first non-transitional
virtio device on the ccw transport, let us introduce a mechanism for
disabling revision 0.  This is more or less equivalent with disabling
legacy as revision 0 is legacy only, and legacy drivers use the revision
0 exclusively.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback.  The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore.  It was the only backend to do
so, and if desired this behavior should be implemented in

virtio-bus.c.

Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We have everything needed for virtio-ccw revision 2 wired up now.
Bump the maximum supported revision reported on a device basis to
the guest so they can make use of it.
Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch adds the response to the READ_STATUS CCW command.
Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Implement the new virtio sockets device for host<->guest communication
using the Sockets API.  Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.

The vsock device must be given a CID (host-wide unique address):

  # qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...

For more information see:
http://qemu-project.org/Features/VirtioVsock

[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Tracked down with an ugly, brittle and probably buggy Perl script.

Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The previous patch moved virtual css bridge and bus out from
virtio-ccw, but kept the direct reference of virtio-ccw specific
unplug function inside css-bridge.c.

To make the virtual css bus and bridge useful for non-virtio devices,
this introduces a common unplug function pointer "unplug" to call
specific virtio-ccw unplug parts. Thus, the tight coupling to
virtio-ccw can be removed.

This unplug pointer is a member of CCWDeviceClass, which is introduced
as an abstract device layer called "ccw-device". This layer is between
DeviceState and specific devices which are plugged in virtual css bus,
like virtio-ccw device. The specific unplug handlers should be assigned
to "unplug" during initialization.
Signed-off-by: NJing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Currently, common base layers virtual css bridge and bus are
defined in hw/s390x/virtio-ccw.c(h). In order to support
multiple types of devices in the virtual channel subsystem,
especially non virtio-ccw, refactoring work needs to be done.

This work is just a pure code move without any functional change
except dropping an empty function virtual_css_bridge_init() and
virtio_ccw_busdev_unplug() changing. virtio_ccw_busdev_unplug()
is specific to virtio-ccw but gets referenced from the common
virtual css bridge code. To keep the functional changes to a
minimum we export this function from virtio-ccw.c and continue
to reference it inside virtual_css_bridge_class_init()
(now living in hw/s390x/css-bridge.c). A follow-up patch will
clean this up.
Signed-off-by: NJing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Introduce a TYPE_* define (like we already use for a couple of other
QOM types) for the name of the virtual CSS bridge QOM type instead of
sprinkling the same string literal over several source files.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

A lot of what virtio_ccw_device_realize() does isn't specific to
virtio; it would apply to emulated CCW as well. Factor it out to make
it easier to implement emulated CCW devices later on.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:

- We can use them in virtio-ccw and split the validity checks for
  a channel device id in general from the constraint checking
  within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
  devices.

While we're at it, improve the validity checks and disallow e.g.
trailing characters.
Suggested-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Move cpu_inject_* to the only C file where they are used.

Move ioinst.h declarations that need S390CPU to cpu.h, to make
ioinst.h independent of cpu.h.

Move channel declarations that only need SubchDev from cpu.h
to css.h, to make more channel users independent of cpu.h.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, virtio-ccw uses its own interfaces to keep indicators mapped
just once even if the same address has been registered multiple times.
These interfaces fit the PCI use case as well. Therefore, move them to
css and make them generic interfaces.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

V9fsState now only contains generic fields. Introduce V9fsVirtioState
for virtio transport.  Change virtio-pci and virtio-ccw to use
V9fsVirtioState.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Let's enable revision 1 for virtio-ccw devices. We can always offer
VERSION_1 as drivers in legacy mode won't be able to see it anyway.

We have to introduce a way to set a lower maximum revision for a device
to accommodate the following cases:
- compat machines (to enforce legacy only)
- virtio-blk with scsi support (version 1 + scsi is fenced by common
  code, with a user-configured max revision of 0 we can allow scsi
  via not offering VERSION_1)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Handle the virtio-ccw revision according to what the guest sets.
When revision 1 is selected, we have a virtio-1 standard device
with byteswapping for the virtio rings.

When a channel gets disabled, we have to revert to the legacy behavior
in case the next user of the device does not negotiate the revision 1
anymore (e.g. the boot firmware uses revision 1, but the operating
system only uses the legacy mode).

Note that revisions > 0 are still disabled.

[CH: assure memory accesses are always BE]
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

This patch adds 9pfs support for virtio-ccw
by registering the virtio_ccw_9p_info type
and adding associated callbacks.
Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.

This should it make easier to offer different sets of host features
for virtio-1/transitional support.
Tested-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1425045219-19958-1-git-send-email-armbru@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the
qdev properties of their VirtIOBlock child.  This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.

Use the QOM alias property to forward property accesses to the
VirtIOBlock child.  This way no duplication is necessary.

Remember to stop calling virtio_blk_set_conf() so that we don't clobber
the values already set on the VirtIOBlock instance.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.

Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Make code using the same indicators point to a single allocated structure
that is freed when the last user goes away.

This will be used by the irqfd code to unmap addresses after the last user
is gone.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Register an I/O adapter interrupt source for when virtio-ccw devices start
using adapter interrupts.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The vdev field is complicated to synchronize.  Just access the
BusState's list of children.

Cc: qemu-stable@nongnu.org
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAndreas Faerber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Here the virtio-net-ccw is modified for the new API. The device
virtio-net-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-scsi-ccw is modified for the new API. The device
virtio-scsi-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-ccw-s390 is modified for the new API. The device
virtio-ccw-s390 extends virtio-ccw-device as before. It creates and
connects a virtio-ccw during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>