The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>

The Linux kernel accesses this register early in its setup.
Signed-off-by: NChristopher Covington <christopher.covington@linaro.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: b30d536cb16ec57b4412172bb6dbc3f00d293e7d.1455060548.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-by: NNathan Rossi <nathan@nathanrossi.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 50deeafb24958a5b6d7f594b5dda399a022c0e5b.1455060548.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-by: NNathan Rossi <nathan@nathanrossi.com>
Message-id: da0563119a9f56fd5fbdc26e7ed19a8a8457c5b9.1455060548.git.alistair.francis@xilinx.com
[PMM: Use 0 for PMCEID0 values for A15 and A57 since our PMU
 does not currently implement any events.]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make get_r13_banked() raise an exception at runtime for the
corner case of SRS from System mode, so that we can UNDEF it;
this brings us in to line with the ARM ARM's set of permitted
CONSTRAINED UNPREDICTABLE choices.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The user-mode versions of get/set_r13_banked() exist just to assert
if they're ever called -- the translate time code should never
emit calls to them because SRS from user mode always UNDEF.
There's no code in the softmmu versions that can't compile in
CONFIG_USER_ONLY, and the assertion is not particularly useful,
so combine the two functions rather than having completely split
versions under ifdefs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Move bank_number()'s implementation into internals.h, so
it's available in the user-mode-only compile as well.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Move get/set_r13_banked() from helper.c to op_helper.c. This will
let us add exception-raising code to them, and also puts them
in the same file as get/set_user_reg(), which makes some conceptual
sense.

(The original reason for the helper.c/op_helper.c split was that
only op_helper.c had access to the CPU env pointer; this distinction
has not been true for a long time, though, and so the split is
now rather arbitrary.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The SRS instruction is:
 * UNDEFINED in Hyp mode
 * UNPREDICTABLE in User or System mode
 * UNPREDICTABLE if the specified mode isn't accessible
 * trapped to EL3 if EL3 is AArch64 and we are at Secure EL1

Clean up the code to handle all these cases cleanly, including
picking UNDEF as our choice of UNPREDICTABLE behaviour rather
blindly trusting the mode field passed in the instruction.
As part of this, move the check for IS_USER into gen_srs()
itself rather than having it done by the caller.

The exception is that we don't UNDEF for calls from System
mode, which need a runtime check. This will be dealt with in
the following commits.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP,
this should be reported with a syndrome register indicating an
FP access trap, not one indicating a system register access trap.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Implement the debug register traps controlled by MDCR_EL2.TDA
and MDCR_EL3.TDA.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Implement trapping of the "debug ROM" registers, which are controlled
by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

Implement the traps to EL2 and EL3 controlled by the bits
MDCR_EL2.TDOSA MDCR_EL3.TDOSA. These can configurably trap
accesses to the "powerdown debug" registers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>

We weren't quite implementing the handling of SCR.SMD correctly.
The condition governing whether the SMD bit should apply only
for NS state is "is EL3 is AArch32", not "is the current EL AArch32".
Fix the condition, and clarify the comment both to reflect this and
to expand slightly on what's going on for the v7-no-Virtualization case.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Correct some corner cases we were getting wrong for
CNTFRQ access rights:
 * should UNDEF from 32-bit Secure EL1
 * only writable from the highest implemented exception level,
   which might not be EL1 now

To clarify the code, provide a new utility function
arm_highest_el() which returns the highest implemented
exception level.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

ARM stops before access to a location covered by watchpoint. Also, QEMU
watchpoint fire is not necessarily an architectural watchpoint match.
Unfortunately, that is hardly possible to ignore a fired watchpoint in
debug exception handler. So move watchpoint check from debug exception
handler to the dedicated watchpoint checking callback.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1454256948-10485-3-git-send-email-serge.fdrv@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All Thumb Neon and VFP instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org

All Thumb coprocessor instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org

In syndrome register values, the IL bit indicates the instruction
length, and is 1 for 4-byte instructions and 0 for 2-byte
instructions. All A64 and A32 instructions are 4-byte, but
Thumb instructions may be either 2 or 4 bytes long. Unfortunately
we named the parameter to the syn_* functions for constructing
syndromes "is_thumb", which falsely implies that it should be
set for all Thumb instructions, rather than only the 16-bit ones.
Fix the functions to name the parameter 'is_16bit' instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-2-git-send-email-peter.maydell@linaro.org

Enable EL3 support for our Cortex-A53 and Cortex-A57 CPU models.
We have enough implemented now to be able to run real world code
at least to some extent (I can boot ARM Trusted Firmware to the
point where it pulls in OP-TEE and then falls over because it
doesn't have a UEFI image it can chain to).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-8-git-send-email-peter.maydell@linaro.org

Implement some corner cases of the behaviour of the NSACR
register on ARMv8:
 * if EL3 is AArch64 then accessing the NSACR from Secure EL1
   with AArch32 should trap to EL3
 * if EL3 is not present or is AArch64 then reads from NS EL1 and
   NS EL2 return constant 0xc00

It would in theory be possible to implement all these with
a single reginfo definition, but for clarity we use three
separate definitions for the three cases and install the
right one based on the CPU feature flags.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-7-git-send-email-peter.maydell@linaro.org

System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org

The arm_generate_debug_exceptions() function as originally implemented
assumes no EL2 or EL3. Since we now have much more of an implementation
of those now, fix this assumption.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-5-git-send-email-peter.maydell@linaro.org

The registers MVBAR and SCR should have the behaviour of trapping to
EL3 if accessed from Secure EL1, but we were incorrectly implementing
them to UNDEF (which would trap to EL1).  Fix this by using the new
access_trap_aa32s_el1() access function.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-4-git-send-email-peter.maydell@linaro.org

Implement the MDCR_EL3 register (which is SDCR for AArch32).
For the moment we implement it as reads-as-written.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-3-git-send-email-peter.maydell@linaro.org

Fix a typo where "EL2" was written but "EL3" intended.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-2-git-send-email-peter.maydell@linaro.org

Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Three in comments and one in code in the stub tcg_liveness_analysis.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We already modify the processor feature bits to not report EL3
support to the guest if EL3 isn't enabled for the CPU we're emulating.
Add similar support for not reporting EL2 unless it is enabled.
This is necessary because real world guest code running at EL3
(trusted firmware or bootloaders) will query the ID registers to
determine whether it should start a guest Linux kernel in EL2 or EL3.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454437242-10262-1-git-send-email-peter.maydell@linaro.org

Implement the inputsize > pamax check for Stage 2 translations.
This is CONSTRAINED UNPREDICTABLE and we choose to fault.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename check_s2_startlevel to check_s2_mmu_setup in preparation
for additional checks.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The S2 starting level table size check applies to both AArch32
and AArch64. Move it to common code.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453932970-14576-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The AArch64 system registers DACR32_EL2, IFSR32_EL2, SPSR_IRQ,
SPSR_ABT, SPSR_UND and SPSR_FIQ are visible and fully functional from
EL3 even if the CPU has no EL2 (unlike some others which are RES0
from EL3 in that configuration).  Move them from el2_cp_reginfo[] to
v8_cp_reginfo[] so they are always present.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1453227802-9991-1-git-send-email-peter.maydell@linaro.org

Split the bits that require it to exec/log.h.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org

This patch provides the name of the architecture in the target.xml
if available.

This allows the remote gdb to detect the target architecture on its
own - so there is no need to specify it manually (e.g. if gdb is
started without a binary) using "set arch *arch_name*".

The name of the architecture is provided by a callback that can
be implemented by all architectures. The arm implementation has
special handling for iwmmxt and returns arm otherwise. This can
be extended if necessary.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[rework to use a callback]
Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The AArch64 FPEXC32_EL2 system register is visible at EL2 and EL3,
and allows those exception levels to read and write the FPEXC
register for a lower exception level that is using AArch32.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1453132414-8127-1-git-send-email-peter.maydell@linaro.org

The architecture requires that for an exception return to AArch32 the
low bits of ELR_ELx are ignored when the PC is set from them:
 * if returning to Thumb mode, ignore ELR_ELx[0]
 * if returning to ARM mode, ignore ELR_ELx[1:0]

We were only squashing bit 0; also squash bit 1 if the SPSR T bit
indicates this is a return to ARM code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

We already implement almost all the checks for the illegal
return events from AArch64 state described in the ARM ARM section
D1.11.2. Add the two missing ones:
 * return to EL2 when EL3 is implemented and SCR_EL3.NS is 0
 * return to Non-secure EL1 when EL2 is implemented and HCR_EL2.TGE is 1

(We don't implement external debug, so the case of "debug state exit
from EL0 using AArch64 state to EL0 using AArch32 state" doesn't apply
for QEMU.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>