- 28 4月, 2014 2 次提交
-
-
由 Hannes Reinecke 提交于
MSI-X support has been fixed in qemu, so we can enable it again. Signed-off-by: NHannes Reinecke <hare@suse.de> [Do not change VMSTATE_PCI_DEVICE to PCIE. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Hannes Reinecke 提交于
Newer firmware implement a LD_LIST_QUERY command, and due to a driver issue no drives might be detected if this command isn't supported. So add emulation for this command, too. Cc: qemu-stable@nongnu.org Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 15 2月, 2014 1 次提交
-
-
由 Paolo Bonzini 提交于
Replace them with uint8/32/64. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 11 2月, 2014 5 次提交
-
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
- 14 10月, 2013 1 次提交
-
-
由 Marcel Apfelbaum 提交于
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 31 8月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
To be passed to qbus_create_inplace(). Use DEVICE() casts instead of direct parent field access. Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 29 7月, 2013 1 次提交
-
-
由 Marcel Apfelbaum 提交于
The category will be used to sort the devices displayed in the command line help. Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 7月, 2013 4 次提交
-
-
由 Andreas Färber 提交于
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline() return an Error**. Prepare qdev initfns for QOM realize error model. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Only apply legacy command line handling when the device has not been hot-plugged. Propagate failure of legacy command line handling. Cc: qemu-stable@nongnu.org Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Replace direct uses of MegasasState::dev with QOM casts and rename it to parent_obj. Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Crosthwaite 提交于
Define and use standard QOM cast macro. Remove usages of DO_UPCAST() and direct -> style upcasting. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 04 7月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 6月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 25 5月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 04 5月, 2013 1 次提交
-
-
由 KONRAD Frederic 提交于
This adds the possibility to create a scsi-bus with a specified name. Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 4月, 2013 3 次提交
-
-
由 Paolo Bonzini 提交于
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 19 12月, 2012 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 12月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
update all users so we can remove the makefile hack. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 15 11月, 2012 1 次提交
-
-
由 Kevin Wolf 提交于
Calling qemu_aio_flush() directly can hang when combined with I/O throttling. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 12 11月, 2012 2 次提交
-
-
由 Hannes Reinecke 提交于
The structure to reference a logical drive has an unused field, which can be used to carry the lun ID. This enabled seabios to establish the proper target/LUN mapping. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 10月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2012 1 次提交
-
-
由 Amos Kong 提交于
This patch cleans up return sentences in the end of void functions. Reported-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
-
- 28 8月, 2012 1 次提交
-
-
由 Hannes Reinecke 提交于
Add a 'hba_serial' property to the megasas driver. Originally it would be using a pointer value which would break migration. Reported-by: NStefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 03 8月, 2012 2 次提交
-
-
由 Hannes Reinecke 提交于
This patch introduces a new property 'sas_address' which allows the user to specify the SAS address for the HBA. The default address is following the NAA locally assigned identifier format with the locally assigned address 0x525400 as used eg for the MAC addresses. The lower bytes are set to the pci address which will ensure uniqueness for the local machine. The port addresses are now calculated based on the magic number 0x1221 (which is found in real hardware, too) plus the device number. Signed-off-by: NHannes Reinecke <hare@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andreas Faerber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Weil 提交于
Commit f90c2bcd changed PCIUnregisterFunc, therefore the function prototype needs an update. megasas.o is currently not linked, so this bug was not detected by the buildbots. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 26 7月, 2012 2 次提交
-
-
由 Paolo Bonzini 提交于
scsi_req_abort is for terminating a command with a non-zero status. The ABORT task management function is invoked by scsi_req_cancel. In fact, ABORTED_COMMAND is a sense key, not a SAM status code. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Hannes Reinecke 提交于
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is rather much. Plus the trace infrastructure doesn't support it. As we can get the information via other means it's pointless to have it in the driver, so rather use some proper trace point here and remove the old one. Signed-off-by: NHannes Reinecke <hare@suse.de> Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 7月, 2012 1 次提交
-
-
由 Hannes Reinecke 提交于
Suggested by blue swirl. Patch is on top of Paolo's scsi-next tree. Signed-off-by: NHannes Reinecke <hare@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 02 7月, 2012 1 次提交
-
-
由 Hannes Reinecke 提交于
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA. I've tested it to work with Linux, Windows Vista, and Windows7. Signed-off-by: NHannes Reinecke <hare@suse.de> [ Squashed trivial changes from Andreas Faerber, rebased over IOMMU and QBus changes - Paolo ] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-