Use DeviceClass rather than SysBusDeviceClass in
grlib_gptimer_class_init().

Cc: chouteau@adacore.com
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-18-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
etraxfs_timer_class_init().

Cc: edgar.iglesias@gmail.com
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181130093852.20739-17-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
pci_dec_21154_device_class_init().

Cc: david@gibson.dropbear.id.au
Cc: mst@redhat.com
Cc: marcel.apfelbaum@gmail.com
Cc: qemu-ppc@nongnu.org
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-id: 20181130093852.20739-16-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
nvram_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-15-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
puv3_pm_class_init().

Cc: gxt@mprc.pku.edu.cn
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-14-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
milkymist_pfpu_class_init().

Cc: michael@walle.cc
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-13-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
milkymist_hpdmc_class_init().

Cc: gxt@mprc.pku.edu.cn
Cc: michael@walle.cc
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-12-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
puv3_intc_class_init().

Cc: gxt@mprc.pku.edu.cn
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-11-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
pl050_class_init().

Cc: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-10-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
milkymist_softusb_class_init().

Cc: michael@walle.cc
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-9-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
puv3_gpio_class_init().

Cc: gxt@mprc.pku.edu.cn
Cc: peter.maydell@linaro.org
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-8-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
puv3_dma_class_init().

Cc: gxt@mprc.pku.edu.cn
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-7-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
g364fb_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: kraxel@redhat.com
Cc: f4bug@amsat.org
Cc: alistair.francis@wdc.com
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-6-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
empty_slot_class_init().
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-5-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
grlib_apbuart_class_init().

Cc: chouteau@adacore.com
Cc: marcandre.lureau@redhat.com
Cc: pbonzini@redhat.com
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-4-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
onenand_class_init().

Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: qemu-block@nongnu.org
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-3-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DeviceClass rather than SysBusDeviceClass in
mv88w8618_wlan_class_init().

Cc: jan.kiszka@web.de
Cc: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org
Signed-off-by: NMao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-2-maozhongyi@cmss.chinamobile.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Architecturally, it's possible for an AArch64 machine to have
all of its RAM over the 4GB mark, but our kernel/initrd loading
code in boot.c assumes that the upper half of the addresses
to load these images to is always zero. Write the whole 64 bit
address into the bootloader code fragment, not just the low half.

Note that, currently, none of the existing QEMU machines have
their main memory over 4GBs, so this was not a user-visible bug.
Signed-off-by: NRicardo Perez Blanco <ricardo.perez_blanco@nokia.com>
[PMM: revised commit message and tweaked some long lines]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The third argument of object_property_set_link() is the name of
property, not related with the QOM type name, using the constant
string instead.
Signed-off-by: NLi Qiang <liq3ea@gmail.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1542880825-2604-1-git-send-email-liq3ea@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s390x patches for 4.0:
- add 4.0 machine type
- various fixes and small changes

# gpg: Signature made Wed 12 Dec 2018 09:52:04 GMT
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20181212:
  hw/s390x/virtio-ccw.c: Don't take address of fields in packed structs
  vfio-ap: flag as compatible with balloon
  s390x/tod: Properly stop the KVM TOD while the guest is not running
  s390/MAINTAINERS: Add Halil as kvm and machine maintainer
  s390x: introduce 4.0 compat machine
  s390x/zpci: drop msix.available
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull request

Minor virtio-blk fixes.

# gpg: Signature made Wed 12 Dec 2018 09:50:17 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  virtio-blk: fix comment for virtio_blk_rw_complete as nalloc is initially -1
  virtio-blk: rename iov to out_iov in virtio_blk_handle_request()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge tpm 2018/12/04 v1

# gpg: Signature made Tue 04 Dec 2018 15:25:52 GMT
# gpg:                using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2018-12-04-1:
  tpm: Make sure the locality received from backend is valid
  tpm: Make sure new locality passed to tpm_tis_prep_abort() is valid
  tpm: Remove unused locty parameter from tpm_tis_abort()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

x86 queue, 2018-12-11

* New CPU features: MOVDIRI, MOVDIR64B (Liu Jingqi);
  STIBP (Eduardo Habkost)
* Fix clang build warning (Peter Maydell)

# gpg: Signature made Tue 11 Dec 2018 20:52:56 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  i386: Add "stibp" flag name
  target/i386/kvm.c: Don't mark cpuid_data as QEMU_PACKED
  x86/cpu: Enable MOVDIR64B cpu feature
  x86/cpu: Enable MOVDIRI cpu feature
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.

Patch produced with scripts/coccinelle/inplace-byteswaps.cocci
(with a couple of long lines manually wrapped).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210120436.30522-1-peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

vfio-ap devices do not pin any pages in the host. Therefore, they
are compatible with memory ballooning.

Flag them as compatible, so both vfio-ap and a balloon can be
used simultaneously.

Cc: qemu-stable@nongnu.org
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Tested-by: NTony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Just like on other architectures, we should stop the clock while the guest
is not running. This is already properly done for TCG. Right now, doing an
offline migration (stop, migrate, cont) can easily trigger stalls in the
guest.

Even doing a
    (hmp) stop
    ... wait 2 minutes ...
    (hmp) cont
will already trigger stalls.

So whenever the guest stops, backup the KVM TOD. When continuing to run
the guest, restore the KVM TOD.

One special case is starting a simple VM: Reading the TOD from KVM to
stop it right away until the guest is actually started means that the
time of any simple VM will already differ to the host time. We can
simply leave the TOD running and the guest won't be able to recognize
it.

For migration, we actually want to keep the TOD stopped until really
starting the guest. To be able to catch most errors, we should however
try to set the TOD in addition to simply storing it. So we can still
catch basic migration problems.

If anything goes wrong while backing up/restoring the TOD, we have to
ignore it (but print a warning). This is then basically a fallback to
old behavior (TOD remains running).

I tested this very basically with an initrd:
    1. Start a simple VM. Observed that the TOD is kept running. Old
       behavior.
    2. Ordinary live migration. Observed that the TOD is temporarily
       stopped on the destination when setting the new value and
       correctly started when finally starting the guest.
    3. Offline live migration. (stop, migrate, cont). Observed that the
       TOD will be stopped on the source with the "stop" command. On the
       destination, the TOD is temporarily stopped when setting the new
       value and correctly started when finally starting the guest via
       "cont".
    4. Simple stop/cont correctly stops/starts the TOD. (multiple stops
       or conts in a row have no effect, so works as expected)

In the future, we might want to send the guest a special kind of time sync
interrupt under some conditions, so it can synchronize its tod to the
host tod. This is interesting for migration scenarios but also when we
get time sync interrupts ourselves. This however will most probably have
to be handled in KVM (e.g. when the tods differ too much) and is not
desired e.g. when debugging the guest (single stepping should not
result in permanent time syncs). I consider something like that an add-on
on top of this basic "don't break the guest" handling.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20181130094957.4121-1-david@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Halil does more work in this area than I do right now. Lets add Halil.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181204133802.100998-1-borntraeger@de.ibm.com>
Acked-by: NHalil Pasic <pasic@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

I fail to see why this is useful as we require MSIX always and
completely fail adding a device.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20181105110313.29312-2-david@redhat.com>
Fixes: 4f6482bfReviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The initial value of nalloc is -1, but not 1.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 1541479952-32355-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In virtio_blk_handle_request(), in_iov is used for input header while iov
is used for output header. Rename iov to out_iov to pair output header's
name with in_iov to avoid confusing people when reading source code.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Message-id: 1541520556-8334-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Trivial patches (2018-12-11)

# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
  Fixes i386 xchgq test
  maint: Grammar fix to mailmap
  MAINTAINERS: Update email address for Fam Zheng
  cutils: Assert in-range base for string-to-integer conversions
  util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
  target: hax: fix errors in comment
  MAINTAINERS: Use my work email to review Build and test automation patches
  MAINTAINERS: Add a missing entry for the NVDIMM device
  MAINTAINERS: Add a missing entry to the QMP section
  MAINTAINERS: Add a missing entry to SPICE
  MAINTAINERS: Add missing entries for the MPS2 machine
  MAINTAINERS: Add missing entries for the Canon DIGIC machine
  MAINTAINERS: Add missing entries to the vhost section
  MAINTAINERS: Add missing entries to the PC Chipset section
  MAINTAINERS: Add a missing entry for the sun4m machines
  MAINTAINERS: Add a missing entry for the Old World machines
  MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
  MAINTAINERS: Add missing entries for the Jazz machine
  MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
  MAINTAINERS: Add a missing entry to the SPARC CPU
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The STIBP flag may be supported by the host KVM module, so QEMU
can allow it to be configured manually, and it can be exposed to
guests when using "-cpu host".

No additional migration code is required because the whole
contents of spec_ctrl is already migrated in the "cpu/spec_ctrl"
section.

Corresponding KVM patch was submitted at:
https://lore.kernel.org/lkml/20181205191956.31480-1-ehabkost@redhat.com/Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181210180250.31299-1-ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

clang complains about taking the address of a packed
member of a struct:

target/i386/kvm.c:1245:27: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
    c = cpuid_find_entry(&cpuid_data.cpuid, 1, 0);
                          ^~~~~~~~~~~~~~~~
target/i386/kvm.c:1297:31: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
        c = cpuid_find_entry(&cpuid_data.cpuid, kvm_base, 0);
                              ^~~~~~~~~~~~~~~~

The kernel's definitions of struct kvm_cpuid2 and struct
kvm_cpuid_entry2 are carefully set up with padding fields
so that there is no between-struct padding anyway, so
the QEMU_PACKED annotation is unnecessary and might result
in the compiler generating worse code. Drop it, and instead
assert at build time that there is no stray padding.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210114654.31433-1-peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity.
Direct store is implemented by using write combining (WC) for writing
data directly into memory without caching the data.

The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 28] MOVDIR64B

The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf

Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: NLiu Jingqi <jingqi.liu@intel.com>
Message-Id: <1541488407-17045-3-git-send-email-jingqi.liu@intel.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

MOVDIRI moves doubleword or quadword from register to memory through
direct store which is implemented by using write combining (WC) for
writing data directly into memory without caching the data.

The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 27] MOVDIRI

The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf

Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: NLiu Jingqi <jingqi.liu@intel.com>
Message-Id: <1541488407-17045-2-git-send-email-jingqi.liu@intel.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Machine queue post-3.1.0 (including 4.0 machine-types)

Features:
* Add 4.0 machine-types to q35/440fx/arm/spapr (Alex Williamson)

Documentation:
* Document vCPU hotplug procedure (Kashyap Chamarthy)
* Deprecate `cpu-add` monitor commands (Kashyap Chamarthy)

Bug fixes:
* A small sun4v_rtc_write() tracing fix that fell through the cracks
  (Eduardo Habkost)
* Validation of "host-nodes" option on memory backends (Eduardo Habkost)
* memory-device fixes and cleanups (David Hildenbrand)

Cleanups:
* Machine-type code cleanup (remove unnecessary instance_init functions)
  (Eduardo Habkost)
* qdev, qom, and global property code cleanups (Marc-André Lureau)
* PCMachineState field renames (Corey Minyard)
* numa: Match struct to typedef name (Eric Blake)
* hostmem-file: remove object id from pmem error message (Zhang Yi)

# gpg: Signature made Tue 11 Dec 2018 17:58:03 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (24 commits)
  qom: remove unimplemented class_finalize
  qdev: move qdev_prop_register_global_list() to tests
  accel: register global_props like machine globals
  qom: make user_creatable_complete() specific to UserCreatable
  qom: make interface types abstract
  tests: qdev_prop_check_globals() doesn't return "all_used"
  pc: Use default_machine_opts to set suppress_vmdesc
  spapr: Delete instance_options functions
  spapr: Use default_machine_opts to set suppress_vmdesc
  spapr: Use default_machine_opts to set use_hotplug_event_source
  virt: Eliminate separate instance_init functions
  q35/440fx/arm/spapr: Add QEMU 4.0 machine type
  hostmem: Validate host-nodes before setting bitmap
  numa: Match struct to typedef name
  i386: Rename bools in PCMachineState to end in _enabled
  move ObjectClass to typedefs.h
  memory-device: avoid overflows on very huge devices
  memory-device: use QEMU_IS_ALIGNED
  range: pass const pointer where possible
  Deprecate HMP `cpu-add`
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Instead of trying to implement something that isn't well specified,
remove it. (it would be tricky to implement, since a class struct is
memcpy on children types...)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-7-marcandre.lureau@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The function is only used by a test, move it there.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181204142023.15982-6-marcandre.lureau@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

global_props is only used for Xen xen_compat_props. It's a static
array of GlobalProperty, like machine globals in SET_MACHINE_COMPAT().
Let's register the globals the same way, without extra copy allocation.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <20181204142023.15982-5-marcandre.lureau@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>