This prevents surface sharing which will be necessary to
fix cirrus HW cursor support.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Changes by kraxel:
 * Remove bochs dispi interface changes.  We'll do that in
   a different way to make sure we don't conflict with
   possible future bochs dispi interface changes.
 * keep live migration bits.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

And initialize it based on target endian
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

We always use rgb_to_pixel32 nowadays.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

VgaState->vram_size is the size of the pci bar.  In case of qxl not the
whole pci bar can be used as vga framebuffer.  Add a new variable
vbe_size to handle that case.  By default (if unset) it equals
vram_size, but qxl can set vbe_size to something else.

This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results
and sanity checks are done with the correct size too.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Instead, add a boolean variable to indicate the presence of the region.
This avoids a repeated malloc/free (later we can also avoid the
add_child/unparent by changing the offset/size of the alias).
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PortioList is an abstraction used for construction of MemoryRegionPortioList
from MemoryRegionPortio. It can be used later to unmap created memory regions.
It also requires proper cleanup because some of the memory inside is allocated
dynamically.

By moving PortioList ot device state we make it possible to cleanup later and
avoid leaking memory.

This change spans several target platforms.  The following testcases cover all
changed lines:
  qemu-system-ppc -M prep
  qemu-system-i386 -vga qxl
  qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Need a way to opt-out from vga.vram being global vmstate, for
secondary vga cards.  Add a bool parameter to vga_common_init
to support this.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Screendumps are alot simpler as we can update non-active
QemuConsoles now.  So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file.  Done.

No console switching needed.  No special support code in the
gfx card emulation needed.  Zap it all.  Also move ppm_save
out of the vga code and next to the qmp_screendump function.

For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles.  I wanna finish the console cleanup before setting
new qapi interfaces into stone.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>

Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch).  Passing NULL is allowed and updates the active console, like
the functions do today.

While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Many headers are used only in a single directory.  These can be
kept in hw/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use QemuConsole instead.  Updates interfaces in console.[ch] and adapts
gfx hardware emulation code.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Postpone stopping the dirty log to the point where the command fifo is
configured to allow drivers which don't use the fifo to work too.
(Without this the picture rendered into the vram never got to the
screen and the DIRECT_VRAM option meant to support this case was
removed a year ago.)
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

With both text (curses) and graphics (vnc/sdl/spice/...) display active
vga text mode emulation fails to update both correctly.  Depending on
whenever vga_update_text() or vga_draw_text() happens to be called first
only the text display or only the graphics display will see display
resolution changes and full redraws.

Fix it by calling both text/gfx resize functions in both code paths and
keep track of full screen redraws needed in VGACommonState fields.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds a mmio bar to the qemu standard vga which allows to
access the standard vga registers and bochs dispi interface registers
via mmio.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Let the text cursor blink at 1.875 Hz, the original VGA cursor
frequency. No timer is used, instead we rely on the fact that the
display is updated periodically.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable
for standard vga and vmware vga.  cirrus and qxl are left with a fixed
size (and private VGA_RAM_SIZE #define) for now.

qxl needs some non-trivial adjustments in the mode list handling deal
with a runtime-configurable size, which calls for a separate qxl patch.

cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess
it would make sense to use these sizes.  That change would break
migration though, so I left it fixed at 8 MB size.  Making it
configurabls is pretty pointless for cirrus as we have to match real
hardware.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The vgabios will check whenever any given video mode will fit into the
given video memory before adding it to the list of available modes, so
there is no need to keep xmax * ymax * 32bpp lower than VGA_RAM_SIZE.

Lets raise the limits a bit.  Should be good for a few years, display
sizes are not growing that fast.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

With pc-0.12, we map the video RAM both through the PCI BAR (the guest does
this) and through a fixed mapping at 0xe0000000.  The memory API doesn't allow
this double map, and aborts.

Fix by using an alias.
Reported-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Standard VGA does not use vga_draw_cursor_line_* functions.
Move the template to cirrus_vga_template.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

[jan: fix cut'n'paste errors]
[avi: adjust pci variants not to use isa functions]
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Memory region refactorings obsoleted them.

CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Most VGA memory access modes require MMIO handling as they demand weird
logic to get a byte from or into the video RAM. However, there is one
exception: chain 4 mode with all memory planes enabled for writing. This
mode actually allows lineary mapping, which can then be combined with
dirty logging to accelerate KVM.

This patch accelerates specifically VBE accesses like they are used by
grub in graphical mode. Not only the standard VGA adapter benefits from
this, also vmware and spice in VGA mode.

CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After the conversion to the new Memory API, vga_dirty_log_restart became
seriously pointless. Remove it from vmware-vga and and then finally drop
the service.

CC: Andrzej Zaborowski <balrogg@gmail.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead, use the bus accessors, or get the address space directly
from the board constructor.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make use of the memory API's ability to satisfy multi-byte accesses via
multiple single-byte accesses.

We have to keep vga_mem_{read,write}b() since they're used by cirrus.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert all vga memory to the memory API.  Note we need to fall back to
get_system_memory(), since the various buses don't pass the vga window
as a memory region.

We no longer need to sync the dirty bitmap of the cirrus mapped memory
banks, since the memory API takes care of that for us.

[jan: fix vga-pci logging]
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>