As spotted by Aneesh, some users pass a NULL opaque so we need to be more
aggressive in checking whether a user means to unregister.

Also fix a double free caused by tag not being reset to zero after delete.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a separate reset function musb_reset() to the usb-musb interface,
so that users who implement a reset function can also reset usb-musb.
Use this in tusb6010.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Initialise usb-musb by passing it a DeviceState* and the offset of the
IRQs in its gpio array, rather than a plain pointer to an irq array.
This is simpler for callers and also allows us to pass in a valid parent
to usb_bus_new(), so the USB bus actually appears in the qdev tree.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Identifiers with double leading underscore are reserved, so rename
__musb_irq_max so we don't encroach on reserved namespace.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch makes qemu assign a port when creating the device, not when
attaching it.  For most usb devices this isn't a noticable difference
because they are in attached state all the time.

The change affects usb-host devices which live in detached state while
the real device is unplugged from the host.  They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.

The change also allows to simplify usb-hub.  It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now.  The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases.  For example it is not possible
any more to plug the hub into one of its own downstream ports.

The usb host adapters must care too.  USBPort->dev being non-NULL
doesn't imply any more the device is in attached state.  The host
adapters must additionally check the USBPort->dev->attached flag.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch the smard card emulation to use the USBDesc*
structs for the usb descriptors.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The ->complete() callback might have released the USBPacket (uhci
actually does), so we must not touch it after the callback returns.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Unfortunaly this is limited to root ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds code to do minimal siTD handling, which is basically
just following the next pointer.  This is good enougth to handle the
inactive siTDs used by FreeBSD.  Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints
total.  Move from one array to two arrays (one IN, one OUT) to maintain
the endpoint state.

When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port.  It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It is perfectly fine to leave the usb device in unconfigured state
(USBHostDevice->configuration == 0).  Just do that and wait for the
guest to explicitly set a configuration.  This is closer to what real
hardware does and it also simplifies the device initialization.  There
is no need to figure how the device is configured on the host.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Limit the number of times qemu tries to open host devices to three.
Reset error counter when the device goes away, after un-plugging and
re-plugging the device qemu will try again three times.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Two fixes for the price of one ;)

First, reinitialize the endpoint table after device reset.
This is needed anyway as the reset might have switched interfaces.
It also clears the endpoint halted state.

Second the CLEAR_HALT ioctl wants a unsigned int passed in as
argument, not uint8_t.

This gets my usb sd card reader (sandisk micromate) going.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Don't report errors on devices which are in disconnected
and closing state.

Add a bunch of trace points to usb-linux.c  Drop a bunch of DPRINTK's in
favor of the trace points.  Also cleanup error reporting a bit while being
at it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

- do not return extra pages when requesting all pages (PAGE CODE = 0x3f)

- return correct sense code for PC = 3 (saved parameters not supported)

- do not return geometry pages for CD devices
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Even though we do not use them, we should include the last three
bytes of sense data in the additional sense length.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to distinguish
from the 12-byte CDB variant, and add a constant for the subcommand.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Writes go through scsi_write_complete at least twice, the first time
to get some data without having actually written anything.  Because
of this, the first time scsi_write_complete is called it will call
bdrv_acct_done and account a read incorrectly.  Fix this by looking
at the aiocb.  I am doing the same in scsi_read_complete for symmetry,
but it is only needed in the (bogus) case of bdrv_aio_readv returning
NULL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The vSphere 4 exported image is streamOptimized extent, which is not
quite correctly handled. Ignore rdgOffset when RGD flag bit not set.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Haiku provides a specially formed vmdk image, which let qemu abort. It a
combination of sparse header and flat data (i.e. with not l1/l2 table at
all). The fix is turn to descriptor when sparse header is zero in field
'capacity'.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Creating streamOptimized subformat. Added subformat option
'streamOptimized', to create a image with compression enabled and each
cluster with a GrainMarker.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support for reading/writing compressed extent.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Added flags field for compressed/streamOptimized extents, open and save
image configuration.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Factor out read/write extent code, since there will be more things to
take care of once reading/writing compressed clusters is introduced.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add twoGbMaxExtentSparse support. Introduce vmdk_free_last_extent.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Enable the createType 'twoGbMaxExtentFlat'. The supporting code is
already in.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Device models should be able to use it without an unclean include of
block_int.h.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We try the drive defined with -drive if=ide,index=0 (or equivalent
sugar).  We use it only if (dinfo && bdrv_is_inserted(dinfo->bdrv) &&
!bdrv_is_removable(dinfo->bdrv)).  This is a convoluted way to test
for "drive media can't be removed".

The only way to create such a drive with -drive if=ide is media=cdrom.
And that sets dinfo->media_cd, so just test that.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

pci_piix3_xen_ide_unplug() unplugs only disks, not CD-ROMs.  It peeks
into the DriveInfo's BlockDriverState to distinguish between the two.
Unclean; use DriveInfo member media_cd, like xen_config_dev_blk().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>