Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  hw/versatile_pci: Drop unnecessary vpb_pci_config_addr()
  versatile_pci: Expose PCI memory space to system
  arm/realview: Fix mapping of PCI regions
  versatile_pci: Implement the PCI controller's control registers
  versatile_pci: Implement the correct PCI IRQ mapping
  versatile_pci: Put the host bridge PCI device at slot 29
  versatile_pci: Use separate PCI I/O space rather than system I/O space
  versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGE
  versatile_pci: Update to realize and instance init functions
  versatile_pci: Expose PCI I/O region on Versatile PB
  versatile_pci: Fix hardcoded tabs

* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Correctly restore FPSCR
  target-arm: Add some missing CPU state fields to VMState
  target-arm: port ARM CPU save/load to use VMState
  target-arm: Reinsert missing return statement in ARM mode SRS decode

* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: fix setgroups/getgroups for non-UID16 archs
  linux-user: fix undefined shift in copy_to_user_fdset
  linux-user: change do_semop to return target errno when unsuccessful

# By Stefan Weil (3) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  m25p80: Remove bogus include of devices.h
  ssh: Remove unnecessary use of strlen function.
  block/ssh: Add missing gcc format attributes
  linux-user: change do_semop to return target errno when unsuccessful
  w64: Fix compiler warnings (wrong format specifier)
  Remove unneeded type casts
  virtio.h: drop unused function prototypes
  bswap: fix compiler warning

Message-id: 1366371241-23430-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pci: add pci test device

This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations.  FAST_MMIO will be added if/when
kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: add pci test device
  kvm: support non datamatch ioeventfd
  kvm: support any size for pio eventfd
  kvm: remove unused APIs

Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Jan Kiszka (4) and Marcelo Tosatti (1)
# Via Marcelo Tosatti
* qemu-kvm/uq/master:
  vmxcap: Update according to SDM of January 2013
  target-i386: kvm: save/restore steal time MSR
  vmxcap: Report APIC register emulation and RDTSCP control
  vmxcap: Augment reported information
  vmxcap: Open MSR file in unbuffered mode

Message-id: cover.1366253306.git.mtosatti@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the helper functions to save and restore the FPSCR, so that
we correctly propagate rounding mode and flushing behaviour into
the float_status fields. This also allows us to stop saving the
vector length/stride fields separately.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A number of CPU state fields were accidentally omitted from
our migration state: some OMAP specific cp15 registers, and 
some related to state for load/store exclusive insns. Add them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Port the ARM CPU save/load code to use VMState. Some state is
saved in a slightly different order to simplify things -- for
example arrays are saved one after the other rather than 'striped',
and we always save all 32 VFP registers even if the CPU happens
to only have 16.

Use one subsection for each feature.  This means that we don't need to
bump the version field each time that a new feature gets introduced.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
[PMM: fixed conflicts, updated to use cpu_class_set_vmsd(),  updated
 with new/removed fields since original patch, changed to use custom
 VMStateInfo for cpsr rather than presave/postload hooks, corrected
 subsection names so vmload doesn't fail]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since patch
   81465888
   target-arm: factor out handling of SRS instruction
the ARM mode SRS instruction has not worked in QEMU.

The problem is a missing return directive that was removed in the
refactoring, so after decoding the instruction, qemu would fall through
to generate an UNDEF exception for an illegal instruction.
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the vpb_pci_config_addr() function -- it is unnecessary since
the size of the memory regions means the hwaddr is always within
the 24 bit size. (This function was probably a leftover from when
read/write functions were called with absolute addresses rather
than relative ones.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).

The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Implement the correct IRQ mapping for the Versatile PCI controller; it
differs between realview and versatile boards, but the previous QEMU
implementation was correct only for the first PCI card on a versatile
board, since we weren't swizzling IRQs based on the slot number.

Since this change would otherwise break any uses of PCI on Linux kernels
which have an equivalent bug (since they have effectively only been
tested against QEMU, not real hardware), we implement a mechanism
for automatically detecting those broken kernels and switching back
to the old mapping. This works by looking at the values the kernel
writes to the PCI_INTERRUPT_LINE register in the config space, which
is effectively the interrupt number the kernel expects the device
to be using.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On real hardware the host bridge appears as a PCI device in slot 29,
so make QEMU put its host bridge in that slot too.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Rather than overloading the system I/O space (which doesn't even make
any sense on ARM) for PCI I/O, create an memory region in the PCI
controller and use that to represent the I/O space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally
handle PCI in a more QOM-like fashion.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Update the Versatile PCI controller to use a realize function rather
than SysBusDevice::init. To reflect the fact that the 'realview_pci'
class is taking most of its implementation from 'versatile_pci' (and
to make the QOM casts work) we make 'realview_pci' a subclass of
'versatile_pci'.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Comments in the QEMU source code claim that the version of the PCI
controller on the VersatilePB board doesn't support the PCI I/O
region, but this is incorrect; expose that region, map it in the
correct location, and drop the misleading comments.

This change removes the only currently implemented difference
between the realview-pci and versatile-pci models; however there
are other differences in not-yet-implemented functionality, so we
retain the distinction between the two device types.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

There is just one line in this source file with a hardcoded tab
indent, so just fix it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now gcc will check whether format string and variable arguments match.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

do_semop() is called from two places, and one of these fails to convert
return error to target errno when semop fails. This patch changes the
function to always return target errno in case of an unsuccessful call.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

GetLastError() returns a DWORD value which is unsigned long,
so the correct format specifier is %lu.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

cpu_physical_memory_read, cpu_physical_memory_write take any pointer
as 2nd argument without needing a type cast.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

They are unused since commit 5c7d0962.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The bswap functions use memcpy but the bswap.h header itself does not seem to
include it in some configuration such as cross compiling for powerpc64
on x86_64 machine.

The patch explicitly includes string.h.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't assume target_id is a short.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

do_semop() is called from two places, and one of these fails to convert
return error to target errno when semop fails. This patch changes the
function to always return target errno in case of an unsuccessful call.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

We already had a test to add -march=i486 when needed.  Make the
existing test independent of vhost-net, so that it is also used
under Win32.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

We already define it in Makefile.target.  But we need to avoid a
curious double negation in order to eliminate it.
Tested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Move -lm to the end of the line, so that it can be picked up as a
dependency by pixman in the static build case.
Reviewed-by: NPeter Maydell <peter.maydell@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>