Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The temporary variable cache in no longer need since tcg_temp_free was introduced.
Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Currently each read/write of ARM register involves a LD/ST TCG operation. This
patch uses TCG memory-backed registers to represent the ARM register set. With
memory-backed registers the LD/ST operations are transparently generated by TCG
and host registers could be used to optimize the generated code.
Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As i8259 in mips_jazz.c is not correctly connected to the isa bus, the
mc146818rtc isa devices fails to be created.
Signed-off-by: NRoy Tam <roytam@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add size checks to avoid overwriting the multiboot structure
when too many modules are loaded.

Patchworks-ID: 35700
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix address specified for cmdline value of module in multiboot structure.

Patchworks-ID: 35699
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Call MADV_MERGEABLE on guest memory allocations.  MADV_MERGABLE will be
available starting in Linux 2.6.32.  This system call registers a region of
virtual address space with Linux as a candidate for transparent memory
sharing.

Patchworks-ID: 35447
Signed-off-by: NIzik Eidus <ieidus@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Update the IRQ state and stop the poll timer on reset. Moreover,
register the reset function with qemu.

Patchworks-ID: 35462
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When the synchronous read and write functions were dropped, they were replaced
by generic emulation functions. Unfortunately, these emulation functions don't
provide the same semantics as the original functions did.

The original bdrv_read would mean that we read some data synchronously and that
we won't be interrupted during this read. The latter assumption is no longer
true with the emulation function which needs to use qemu_aio_poll and therefore
allows the callback of any other concurrent AIO request to be run during the
read. Which in turn means that (meta)data read earlier could have changed and
be invalid now. qcow2 is not prepared to work in this way and it's just scary
how many places there are where other requests could run.

I'm not sure yet where exactly it breaks, but you'll see breakage with virtio
on qcow2 with a backing file. Providing synchronous functions again fixes the
problem for me.

Patchworks-ID: 35437
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Putting it right in the middle of the explanation for "-serial udp" probably
wasn't the best idea.

Patchworks-ID: 35603
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Not all placeholders in options descriptions had the @var tag on them. Add the
tag so that it's clearly visible that they are placeholders.

Patchworks-ID: 35602
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, suboptions (i.e. something like file=file for -drive) are rendered
as @code, so we're losing any @var highlighting in the man pages.

Replace them by @option, so that you actually can see what is a placeholder and
what is meant verbatim.

Patchworks-ID: 35601
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

For NICs, net_init_client() returns the index into the NICInfo table.

qemu_opts_foreach() interprets non-zero as an error return an stops
iterating over the options.

So, if you have more than one '-net nic' on the command line, subsequent
'-net' options do not get processed.

Fix this by making net_client_init() only return non-zero if
net_init_client() returns an error.
Reported-by: NPeter Lieven <pl@dlh.net>
Patchworks-ID: 35736
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we have re-factored the packet queue code, we can re-use
it for peer-to-peer also.

Patchworks-ID: 35520
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.

Patchworks-ID: 35511
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce a 'peer' member to VLANClientState as an alternative
to a vlan. The idea being that packets are transfered directly
from peer clients rather than going through a vlan.

Patchworks-ID: 35516
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35515
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allows them to be cleaned up at shutdown.

This is pretty lame, but will eventually go away as we make vlans
the special case.

Patchworks-ID: 35518
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Same as for -net except for:

- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required

Patchworks-ID: 35517
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35506
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35505
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow net clients to be created which are not connected to any vlan.

This is needed by Gerd in order to allow adding -device nic, where
the absence of a vlan parameter will not imply vlan=0. Also needed
to allow adding a -netdevice option which doesn't connect the backend
to a vlan.

Patchworks-ID: 35513
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35507
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Just use the name field instead since we now use the id paramater as
the name, if supplied. Only implication with this change is that if
id is not supplied, the value of the name paramater is used as an
id.

Patchworks-ID: 35512
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use id= in the same was as the current name= parameter; if both are
specified, id= is used.

Patchworks-ID: 35514
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35504
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Needed for e.g. looking up a file descriptor name using
monitor_get_fd() in net_init_tap()

Patchworks-ID: 35509
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Without this, I'm seeing a segfault when unpluging a NIC.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Patchworks-ID: 35519
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Once upon the time when QEMU hacking was fun
there was a brave knight who wanted to have
a driver for a special intel nic.

So he started by cloning ne2000.c which also
meant that the new born eepro100.c was
immediately three years old.

Other knights who also wanted to have fun and
take their part in the battle thought that it
would be a good idea to remove stupid code
which says "missing nic load, missing nic save".

They saved everything they saw, man and women,
ne2000 code and runtime address offsets, and
put all saved elements in a prison called
vm data.

When the first knight came back and noticed
the unhappy prisoners, he wanted to set them
free. But the keepers of the keys told him
that they would have to stay there forever
for compatibility reasons.

So our brave knight now takes a new effort
to save the souls of the poor prisoners by
removing their names.

Their bodies will have to rot in the dungeons
of compatibility forever, watched by the
keepers of the keys.

Patchworks-ID: 35635
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

a. call waveOutReset to drain the queue
b. unprepare headers before freeing underlying memory
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

The SCSI-2 documentation suggests, that although the block
descriptor is optional for an arbitrary SCSI-2 device (chapter 8.2.10,
http://ldkelley.com/SCSI2/SCSI2/SCSI2/SCSI2/SCSI2-08.html )
it is mandatory for a disk: chapters 9.1.2, 9.3.3
( http://ldkelley.com/SCSI2/SCSI2/SCSI2/SCSI2-09.html ) don't say
"optional" any more, just "The block descriptor in the MODE SENSE
data describes the block lengths that are used on the medium."

v2: limit the number of sectors reported in the block descriptor to 24 bits.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix done instruction to resume with pc=tnpc, npc=tnpc+4
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>