- whitespace fix
- unnecessary != 0 in a condition

Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The current code is broken: it does surprise removal which crashes guests.

Reimplemented the steps:
 - Hotplug triggers both 'present detect change' and
   'attention button pressed'.

 - Hotunplug starts by triggering 'attention button pressed',
   then waits for the OS to power off the device and only
   then detaches it.

Fixes CVE-2014-3471.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Trivial issue, discovered while debugging.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pc-q35-1.4 was incorrectly using PC_COMPAT_1_4 instead of
PC_Q35_COMPAT_1_4.

The only side-effect was that the hpet compat property (inherited from
PC_Q35_COMPAT_1_7) was missing.

Without this patch, pc-q35-1.4 inicorrectly initializes hpet-intcap to
0xff0104 (behavior introduced in QEMU 2.0, by commit
7a10ef51).
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Currently vectors silently cleared to 0 if the initialization is failed,
but user should at least have one way to notice this.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit c76bf6bb ("Add chardev API
qemu_chr_fe_get_msgfds") extended the get_msgfds API from one to
multiple file descriptors.  It forgot to close unused file descriptors
before freeing the file descriptor array.

This patch prevents a file descriptor leak if the tcp_get_msgfds()
callers requests fewer file descriptors than are available.

Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit c76bf6bb ("Add chardev API
qemu_chr_fe_get_msgfds") broke qemu_chr_fe_get_msgfd() because it
changed the return value.

Callers expect -1 if no fd is available.  The commit changed the return
value to 0 (which is a valid file descriptor number) so callers always
detected a file descriptor even if none was available.

This patch fixes qemu-iotests 045:

  $ cd tests/qemu-iotests && ./check 045
  [...]
  +FAIL: test_add_fd_invalid_fd (__main__.TestFdSets)
  +----------------------------------------------------------------------
  +Traceback (most recent call last):
  +  File "./045", line 123, in test_add_fd_invalid_fd
  +    self.assert_qmp(result, 'error/class', 'GenericError')
  +  File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 232, in assert_qmp
  +    result = self.dictpath(d, path)
  +  File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 211, in dictpath
  +    self.fail('failed path traversal for "%s" in "%s"' % (path, str(d)))
  +AssertionError: failed path traversal for "error/class" in "{u'return': {u'fdset-id': 2, u'fd': 0}}"

Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

"0x1-0x10" looks better than "0x1-10"
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Also fix minor indentation issues in the surrounding code.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Enable calling set_ics() from within e1000_autoneg_timer() without
the need for a forward declaration.

This patch contains no functional changes.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Generate a link status change interrupt once link auto-netotiation
is successfully completed. This does not affect Linux and Windows
(XP and 7 tested) in any way, but is needed by the stock OS X driver
(AppleIntel8254XEthernet.kext), which would otherwise fail to notice
the link status change event.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Using mii-tool (on F20-live), the following output is produced:

  SIOCGMIIREG on ens3 failed: Input/output error
  ens3: no autonegotiation, 1000baseT-FD flow-control, link ok

The first line (SIOCGMIIREG error) is due to mii-tool's inability
to read the PHY auto-negotiation expansion register.
On the second line, "no autonegotiation" is wrong, and caused by
the absence of a flag in the link partner ability register which
would indicate that our link partner has acked us. This flag is
listed as "reserved" in the Intel e1000 manual, but mii-tool uses
it as LPA_LPACK from /usr/include/linux/mii.h.

This patch adds read access to PHY_AUTONEG_EXP and defines the
link partner ack flag, allowing mii-tool to generate output as
normally expected:

  ens3: negotiated 1000baseT-FD flow-control, link ok
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch emulates auto-negotiation when the network link status
is modified externally (i.e. via "set_link <id> off/on").

Also, a couple of cleanup items:
  - unset PHY status reg. AUTONEG_COMPLETE during link_down()
  - set PHY status reg. AUTONEG_COMPLETE during autoneg_timer() only
    if we actually brought the link up.
  - group all checks for "can we, and should we autonegotiate?"
    together for more clarity.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fix compile for older glib, provide conditionally compiled versions of the
used glib APIs.
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Additional stubs:
 - chr_baum_init
 - qemu_chr_open_spice_vmc
 - qemu_chr_open_spice_port
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

fixup documentation comments and HMP message/help text
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vhost_verify_ring_mappings leaks mappings on error.
Fix this up.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vhost user does not support LOG_ALL feature bit.
Generally, we should not try to set this bit without
checking that backend can support it first.

Detect and block migration.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Block pull request

# gpg: Signature made Mon 23 Jun 2014 09:53:49 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  block: asynchronously stop the VM on I/O errors
  vl: allow other threads to do qemu_system_vmstop_request
  sheepdog: fix NULL dereference in sd_create
  QemuOpts: check NULL opts in qemu_opt_get functions
  block: m25p80: Support read only bdrvs.
  block: m25p80: sync_page(): Deindent function body.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/mcayland/qemu-sparc:
  apb: Fix out-of-bounds array write access
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/mcayland/qemu-openbios:
  Update OpenBIOS images
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:

./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman            none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
                 from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
 #include <pixman.h>
                    ^
compilation terminated.
Reported-by: NRiku Voipio <riku.voipio@iki.fi>
Tested-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread.  However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.

To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time.  Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.

However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM.  In particular:

- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.

- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.

The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.

This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.

Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).

qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user.  This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Following command

qemu-img create -f qcow2 sheepdog:test 20g

will cause core dump because aio_context is NULL in sd_create. We should
initialize it by qemu_get_aio_context() to avoid NULL dereference.

Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Some places will call bdrv_create_file(filename, NULL, &local_err), where
opts is NULL. Check NULL in qemu_opt_get and qemu_opt_get_*_del functions,
to avoid extra effort of checking opts before calling them every time.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.

Makes implementation consistent with flash_zynq_area().
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Update OpenBIOS images to SVN r1306 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

The array regs is declared with IOMMU_NREGS (3) elements and accessed
using IOMMU_CTRL (0) and IOMMU_BASE (8). In most cases, those values
are right shifted before being used as an index which results in indices
0 and 1. In one case, this right shift was missing for IOMMU_BASE which
results in an out-of-bounds write access with index 8.

The patch adds the missing shift operation also for IOMMU_CTRL where
it is needed only for cosmetic reasons.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Add VMStateDescription for GT64120 PCI emulation used by the Malta
platform, to allow it to work with savevm/loadvm and live migration.

The entire register array is saved/restored using VMSTATE_UINT32_ARRAY
(fixed length GT_REGS = 1024).
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Convert to VMState]
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to avoid access to the CPUMIPSState structure in the
translator, keep a copy of CP0_Config1 into DisasContext. The whole
register is read-only so it can be copied as a single value.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* remotes/kvm/uq/master:
  hw/mips: malta: Don't boot from flash with KVM T&E
  MAINTAINERS: Add entry for MIPS KVM
  target-mips: Enable KVM support in build system
  hw/mips: malta: Add KVM support
  hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
  target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
  target-mips: kvm: Add main KVM support for MIPS
  kvm: Allow arch to set sigmask length
  target-mips: get_physical_address: Add KVM awareness
  target-mips: get_physical_address: Add defines for segment bases
  hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
  hw/mips/cputimer: Don't start periodic timer in KVM mode
  target-mips: Reset CPU timer consistently
  KVM: Fix GSI number space limit
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc,pci,virtio,hotplug fixes, enhancements

numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (109 commits)
  numa: use RAM_ADDR_FMT with ram_addr_t
  qapi/string-output-visitor: fix bugs
  tests: simplify code
  qapi: fix input visitor bugs
  acpi: rephrase comment
  qmp: add ACPI_DEVICE_OST event handling
  qmp: add query-acpi-ospm-status command
  acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
  acpi: introduce TYPE_ACPI_DEVICE_IF interface
  qmp: add query-memory-devices command
  numa: handle mmaped memory allocation failure correctly
  pc: acpi: do not hardcode preprocessor
  qmp: clean out whitespace
  qdev: recursively unrealize devices when unrealizing bus
  qdev: reorganize error reporting in bus_set_realized
  qapi: fix build on glib < 2.28
  qapi: make string output visitor parse int list
  qapi: make string input visitor parse int list
  tests: fix memory leak in test of string input visitor
  hmp: add info memdev
  ...

Conflicts:
	include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm:
 * Support PSCI 0.2 when using KVM
 * fix AIRCR reset value for v7M CPUs
 * report correct size information for pflash_cfi01
 * minor coverity fixes
 * avoid warnings on Windows builds due to #define clash
 * implement TTBCR PD0/PD1 bits

# gpg: Signature made Thu 19 Jun 2014 18:35:06 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140619:
  armv7m_nvic: fix AIRCR implementation
  Use PSCI v0.2 compatible string when KVM or TCG provides it
  target-arm: Introduce per-CPU field for PSCI version
  target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64
  target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possible
  target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64
  kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENT
  hw/block/pflash_cfi01: Report correct size info for parallel configs
  hw/arm/vexpress: Forbid specifying flash contents in two ways at once
  target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()
  target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()
  target-arm: Add ULL suffix to calculation of page size
  hw/arm/spitz: Avoid clash with Windows header symbol MOD_SHIFT
  target-arm: implement PD0/PD1 bits for TTBCR
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc: cleanups and fixes

# gpg: Signature made Thu 19 Jun 2014 12:02:09 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20140619-1:
  vnc: fix screen updates
  vnc: Drop superfluous conditionals around g_strdup()
  vnc: Drop superfluous conditionals around g_free()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Tested-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1403244764-8622-1-git-send-email-kraxel@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/rth/tcg-next:
  tcg/optimize: Don't special case TCG_OPF_CALL_CLOBBER
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>