- 21 12月, 2009 9 次提交
-
-
由 Paul Brook 提交于
Implement LAN9118 general purpose timer and PHY interrupts. Fix global interrupt status bit. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Alexander Graf 提交于
For what I know DCR is always 32 bits wide, so we should also use uint32_t to pass it along the stacks. This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making it compile without --disable-werror Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Fix the alternate time base the same way as the default timebase. SPR_ATBL should return a 64-bit value on 64 bit implementations. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Alexander Graf 提交于
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL. On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full 64 bits as return value. If we only take the lower ones, fine. But Linux wants to see all 64 bits or it breaks. This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary, which usually happened a few seconds after bootup. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Alpha always used 32-bit uids, but never renamed the syscalls to match i386 when 32-bit uids were added there. This enables the proper bits in syscall.c. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Andreas Färber 提交于
Also change the New World default CPU to 970FX for ppc64, since the G4 is a 32-bit CPU. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Reported-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 20 12月, 2009 13 次提交
-
-
由 Kevin Wolf 提交于
ROMs need to be loaded if they are anywhere in the requested area, not only at the very beginning. This fixes Multiboot with ELF kernels that have more than one program header. Signed-off-by: NKevin Wolf <mail@kevin-wolf.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
There's no sense in separately declaring target_{elf_greg,uid,gid,pid}_t for every architecture. Just declare them once with appropriate USE_UID16 handling. Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Nathan Froyd 提交于
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
It was possible to load roms at address 0, but commit 632cf034 started to forbid that, which broke at least ARM versatile. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Riku Voipio 提交于
Force_sig should be always called with TARGET_ signals. Not that it really matters with SEGV, so this patch is just for cleanup and improving consistency. Signed-off-by: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Riku Voipio 提交于
mmap_lock() can be called while tb_lock() is being held. To avoid deadlock when one thread is holding mmap_lock and another tb_lock, _always_ lock first tb_lock(). Signed-off-by: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Riku Voipio 提交于
Fixes receiving signals when guest code is being executed in a tight loop. For an example, try interrupting the following code with ctrl-c. http://nchipin.kos.to/test-loop.c The tight loop is ofcourse brainless, but it is also exactly how the waitpid* testcases are implemented. Signed-off-by: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 19 12月, 2009 18 次提交
-
-
由 Blue Swirl 提交于
Fixes breakage by 299060a0. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Kirill A. Shutemov 提交于
We really need compile _all_ sources for user target with -fpie when use --enable-user-pie. It's regression introduced by commit add16157. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Alexander Graf 提交于
When using the escc with Linux, we need interrupts. So instead of creating a dummy device, let's just map them to the openpic we have anyways. This makes Linux on PPC64 with console=ttyPZ0 work. Obviously, this change needs to be reflected in openbios. Patch for that follows this one. Please update the binary then. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Alexander Graf 提交于
When lowering an IRQ line, we search for the line we're supposed to lower. Usually we run into an optimization there that queues up interrupts. This queue ends with -1. Unfortunately we didn't set the first item to -1. This patch fixes this, making interrupts work on PPC64. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
The only change is updating the makefile but that way we're carrying an official release. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This reverts commit 3a492104. From Luiz: do_migrate_set_speed() accepts a suffix for the 'value' argument and this is not good for QMP. We will have to add a new argument type to handle that and this will have to wait for 0.13. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Otherwise, the driver does not work in Linux after the INT_DISABLE changes in PCI. Michael Tsirkin had a patch to do this, I'm not sure what happened to it. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This makes do_balloon() accept megabyte values from the user Monitor while accepting byte values for QMP. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This is a target long value in megabytes which should be converted to bytes. It will be used by handlers which accept a megabyte value when in "user mode". Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
- Remove "draft" status - Change default success response to be json-object - Change error and event data member to be a json-object - Update examples - Add new section "Compatibility Considerations" - Other fixes and clarifications Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
- Fix output description - Fix command-line usage notes - Minor improvements Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This is for debug purposes only. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Currently, when a regular command doesn't have any data to output, QMP will emit: { "return": "OK" } Returning an empty dict is better though, because dicts can support some protocol changes in a compatible way. So, with this commit we will return: { "return": {} } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Looks like I dropped this check when addressing the 'query-' commands request. QMP should only handle converted commands, obviously. Reported-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Alexander Graf 提交于
My segment sync patch broke compilation on PPC32, because it was trying to sync the SLB even though ppc32 CPUs don't have an SLB. So let's only sync it when we're on a PP64 one! Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Riku Voipio 提交于
Convert musb fifo to 8bit to allow 8/16/32bit access MUSB allows reading and writing to the fifo in 32/16/8 bit width. The Linux kernel does this sometimes, most usually at the end of writing the packet to allow packet to end at a odd bytecount. Convert the fifo to 8bit allows removing lots of shifts which shows that the fifo is more natural as 8bit. While at it, add multiple missing register definitions and and cleanup debug prints. Signed-off-by: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-