- 12 7月, 2016 1 次提交
-
-
由 Markus Armbruster 提交于
include/hw/pci-host/spapr.h needs hw/ppc/spapr.h. It checks whether its header guard is defined, and errors out if it isn't. Playing games with some other header's guard symbol is not a good idea. Just include the frackin' header already. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
- 05 7月, 2016 1 次提交
-
-
由 Alexey Kardashevskiy 提交于
This adds support for Dynamic DMA Windows (DDW) option defined by the SPAPR specification which allows to have additional DMA window(s) The "ddw" property is enabled by default on a PHB but for compatibility the pseries-2.6 machine and older disable it. This also creates a single DMA window for the older machines to maintain backward migration. This implements DDW for PHB with emulated and VFIO devices. The host kernel support is required. The advertised IOMMU page sizes are 4K and 64K; 16M pages are supported but not advertised by default, in order to enable them, the user has to specify "pgsz" property for PHB and enable huge pages for RAM. The existing linux guests try creating one additional huge DMA window with 64K or 16MB pages and map the entire guest RAM to. If succeeded, the guest switches to dma_direct_ops and never calls TCE hypercalls (H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM and not waste time on map/unmap later. This adds a "dma64_win_addr" property which is a bus address for the 64bit window and by default set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware uses and this allows having emulated and VFIO devices on the same bus. This adds 4 RTAS handlers: * ibm,query-pe-dma-window * ibm,create-pe-dma-window * ibm,remove-pe-dma-window * ibm,reset-pe-dma-window These are registered from type_init() callback. These RTAS handlers are implemented in a separate file to avoid polluting spapr_iommu.c with PCI. This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs and updates all references to dma_liobn. However this does not add 64bit LIOBN to the migration stream as in fact even 32bit LIOBN is rather pointless there (as it is a PHB property and the management software can/should pass LIOBNs via CLI) but we keep it for the backward migration support. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 01 7月, 2016 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The "ICP" is a different object than the "XICS". For historical reasons, we have a number of places where we name a variable "icp" while it contains a XICSState pointer. There *is* an ICPState structure too so this makes the code really confusing. This is a mechanical replacement of all those instances to use the name "xics" instead. There should be no functional change. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> [spapr_cpu_init has been moved to spapr_cpu_core.c, change there] Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 07 6月, 2016 1 次提交
-
-
由 Alexey Kardashevskiy 提交于
This will be later used by the "ibm,reset-pe-dma-window" RTAS handler which resets the DMA configuration to the defaults. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 16 3月, 2016 4 次提交
-
-
由 David Gibson 提交于
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is only one implementation of the finish_realize hook in sPAPRPHBClass. So, we can fold that implementation into its (single) caller, and remove the hook. That's the last thing left in sPAPRPHBClass, so that can go away as well. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
-
由 David Gibson 提交于
Now that the regular spapr-pci-host-bridge can handle EEH, there are only two things that spapr-pci-vfio-host-bridge does differently: 1. automatically sizes its DMA window to match the host IOMMU 2. checks if the attached VFIO container is backed by the VFIO_SPAPR_TCE_IOMMU type on the host (1) is not particularly useful, since the default window used by the regular host bridge will work with the host IOMMU configuration on all current systems anyway. Plus, automatically changing guest visible configuration (such as the DMA window) based on host settings is generally a bad idea. It's not definitively broken, since spapr-pci-vfio-host-bridge is only supposed to support VFIO devices which can't be migrated anyway, but still. (2) is not really useful, because if a guest tries to configure EEH on a different host IOMMU, the first call will fail and that will be that. It's possible there are scripts or tools out there which expect spapr-pci-vfio-host-bridge, so we don't remove it entirely. This patch reduces it to just a stub for backwards compatibility. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
-
由 David Gibson 提交于
Now that the EEH code is independent of the special spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI host bridges instead. We do this by changing spapr_phb_eeh_available() to be based on the vfio_eeh_as_ok() call instead of the host bridge class. Because the value of vfio_eeh_as_ok() can change with devices being hotplugged or unplugged, this can potentially lead to some strange edge cases where the guest starts using EEH, then it starts failing because of a change in status. However, it's not really any worse than the current situation. Cases that would have worked previously will still work (i.e. VFIO devices from at most one VFIO IOMMU group per vPHB), it's just that it's no longer necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
-
由 David Gibson 提交于
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the special groupid field in sPAPRPHBVFIOState. So we can simplify, removing the class specific callbacks with direct calls based on a simple spapr_phb_eeh_enabled() helper. For now we implement that in terms of a boolean in the class, but we'll continue to clean that up later. On its own this is a rather strange way of doing things, but it's a useful intermediate step to further cleanups. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
-
- 23 10月, 2015 1 次提交
-
-
由 David Gibson 提交于
At present the PCI host bridge (PHB) for the pseries machine type has a fixed DMA window from 0..1GB (in PCI address space) which is mapped to real memory via the PAPR paravirtualized IOMMU. For better support of VFIO devices, we're going to want to allow for different configurations of the DMA window. Eventually we'll want to allow the guest itself to reconfigure the window via the PAPR dynamic DMA window interface, but as a preliminary this patch allows the user to reconfigure the window with new properties on the PHB device. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
-
- 07 7月, 2015 1 次提交
-
-
由 David Gibson 提交于
The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 04 6月, 2015 3 次提交
-
-
由 Michael Roth 提交于
This option enables/disables PCI hotplug for a particular PHB. Also add machine compatibility code to disable it by default for machine types prior to pseries-2.4. Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> [agraf: move commas for compat fields] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
This makes find_phb()/find_dev() public and changed its names to spapr_pci_find_phb()/spapr_pci_find_dev() as they are going to be used from other parts of QEMU such as VFIO DDW (dynamic DMA window) or VFIO PCI error injection or VFIO EEH handling - in all these cases there are RTAS calls which are addressed to BUID+config_addr in IEEE1275 format. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
This gets rid of a magic constant describing the default DMA window size for an emulated PHB. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 09 3月, 2015 3 次提交
-
-
由 Gavin Shan 提交于
The emulation for EEH RTAS requests from guest isn't covered by QEMU yet and the patch implements them. The patch defines constants used by EEH RTAS calls and adds callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset, eeh_configure}, which are going to be used as follows: * RTAS calls are received in spapr_pci.c, sanity check is done there. * RTAS handlers handle what they can. If there is something it cannot handle and the corresponding sPAPRPHBClass callback is defined, it is called. * Those callbacks are only implemented for VFIO now. They do ioctl() to the IOMMU container fd to complete the calls. Error codes from that ioctl() are transferred back to the guest. [aik: defined RTAS tokens for EEH RTAS calls] Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
At the moment sPAPR only supports 512MB window for MMIO BARs. However modern devices might want bigger 64bit BARs. This extends MMIO window from 512MB to 62GB (aligned to SPAPR_PCI_WINDOW_SPACING) and advertises it in 2 records in the PHB "ranges" property. 32bit gets the space from SPAPR_PCI_MEM_WIN_BUS_OFFSET till the end of 4GB, 64bit gets the rest of the space. If no space is left, 64bit range is not advertised. The MMIO space size is set to old value of 0x20000000 by default for pseries machines older than 2.3. The approach changes the device tree which is a guest visible change, however it won't break migration as: 1. we do not support migration to older QEMU versions 2. migration to newer QEMU will migrate the device tree as well and since the new layout only extends the old one and does not change address mappigns, no breakage is expected here too. SLOF change is required to utilize this extension. Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
pseries guests can have large numbers of PCI host bridges. To avoid the user having to specify a number of different configuration values for every one, the device supports an "index" property which is a shorthand setting the various window and configuration addresses from a predefined sensible set. There are some problems with the details at present: * The "index" propery is signed, but negative values will create PCI windows below where we expect, potentially colliding with other devices * No limit is imposed on the "index" property and large values can translate to extremely large window addresses. With PCI passthrough in particular this can mean we exceed various mapping and physical address limits causing the guest host bridge to not work in strange ways. This patch addresses this, by making "index" unsigned, and imposing a limit. Currently the limit allows indices from 0..255 which is probably enough host bridges for the time being. It's fairly easy to extend if we discover we need more. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 08 9月, 2014 1 次提交
-
-
由 Greg Kurz 提交于
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X. Commit cc943c36 has modified MSI-X so that writes are made using the bus master address space and follow the IOMMU path. Unfortunately, the IOMMU address space address space does not have an MSI window: the notification is silently dropped in unassigned_mem_write instead of reaching the guest... The most visible effect is that all virtio devices are non-functional on sPAPR since then. :( This patch does the following: 1) map the MSI window into the IOMMU address space for each PHB - since each PHB instantiates its own IOMMU address space, we can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW) - no real need to keep the MSI window setup in a separate function, the spapr_pci_msi_init() code moves to spapr_phb_realize(). 2) kill the global MSI window as it is not needed in the end Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 27 6月, 2014 2 次提交
-
-
由 Alexey Kardashevskiy 提交于
Currently SPAPR PHB keeps track of all allocated MSI (here and below MSI stands for both MSI and MSIX) interrupt because XICS used to be unable to reuse interrupts. This is a problem for dynamic MSI reconfiguration which happens when guest reloads a driver or performs PCI hotplug. Another problem is that the existing implementation can enable MSI on 32 devices maximum (SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that. This makes use of new XICS ability to reuse interrupts. This reorganizes MSI information storage in sPAPRPHBState. Instead of static array of 32 descriptors (one per a PCI function), this patch adds a GHashTable when @config_addr is a key and (first_irq, num) pair is a value. GHashTable can dynamically grow and shrink so the initial limit of 32 devices is gone. This changes migration stream as @msi_table was a static array while new @msi_devs is a dynamic hash table. This adds temporary array which is used for migration, it is populated in "spapr_pci"::pre_save() callback and expanded into the hash table in post_load() callback. Since the destination side does not know the number of MSI-enabled devices in advance and cannot pre-allocate the temporary array to receive migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro which allocates the array automatically. This resets the MSI configuration space when interrupts are released by the ibm,change-msi RTAS call. This fixed traces to be more informative. This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which was incorrect by accident. As the internal representation changed, thus bumps migration version number. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> [agraf: drop g_malloc_n usage] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
The patch adds a spapr-pci-vfio-host-bridge device type which is a PCI Host Bridge with VFIO support. The new device inherits from the spapr-pci-host-bridge device and adds an "iommu" property which is an IOMMU id. This ID represents a minimal entity for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU group is called a Partitionable Endpoint (PE). Current implementation supports one IOMMU id per QEMU VFIO PHB. Since SPAPR allows multiple PHB for no extra cost, this does not seem to be a problem. This limitation may change in the future though. Example of use: Configure and Add 3 functions of a multifunctional device to QEMU: (the NEC PCI USB card is used as an example here): -device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \ -device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true -device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB -device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB where: * index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows offset); * iommu=4 is an IOMMU id which can be found in sysfs: [aik@vpl2 ~]$ cd /sys/bus/pci/devices/0004:00:00.0/ [aik@vpl2 0004:00:00.0]$ ls -l iommu_group lrwxrwxrwx 1 root root 0 Jun 5 12:49 iommu_group -> ../../../kernel/iommu_groups/4 Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 16 6月, 2014 4 次提交
-
-
由 Alexey Kardashevskiy 提交于
This removes window_size as it is basically a copy of nb_table shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are going to support windows as big as the entire RAM and this number will be bigger that 32 capacity, we will have to do something about @window_size anyway and removal seems to be the right way to go. This removes dma_window_start/dma_window_size from sPAPRPHBState as they are no longer used. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
At the moment sPAPRPHBState contains a @tcet pointer to the only TCE table. However sPAPR spec allows having more than one DMA window. Since the TCE object is already a child of SPAPR PHB object, there is no need to keep an additional pointer to it in sPAPRPHBState so remove it. This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable objects. This changes the default DMA window properties calculation. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
Currently the default DMA window is represented by a single MemoryRegion. However there can be more than just one window so we need a "root" memory region to be separated from the actual DMA window(s). This introduces a "root" IOMMU memory region and adds a subregion for the default DMA 32bit window. Following patches will add other subregion(s). This initializes a default DMA window subregion size to the guest RAM size as this window can be switched into "bypass" mode which implements direct DMA mapping. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
The spapr-pci PHB initializes IOMMU for emulated devices only. The upcoming VFIO support will do it different. However both emulated and VFIO PHB types share most of the initialization code. For the type specific things a new finish_realize() callback is introduced. This introduces sPAPRPHBClass derived from PCIHostBridgeClass and adds the callback pointer. This implements finish_realize() for emulated devices. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> [agraf: Fix compilation] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 02 9月, 2013 1 次提交
-
-
由 Alexey Kardashevskiy 提交于
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS hypercalls which return global IRQ numbers to a guest so it only operates with those and never touches MSIMessage. Therefore MSIMessage handling is completely hidden in QEMU. Previously every sPAPR PCI host bridge implemented its own MSI window to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci or vfio) and route them to the guest via qemu_pulse_irq(). MSIMessage used to be encoded as: .addr - address within the PHB MSI window; .data - the device index on PHB plus vector number. The MSI MR write function translated this MSIMessage to a global IRQ number and called qemu_pulse_irq(). However the total number of IRQs is not really big (at the moment it is 1024 IRQs starting from 4096) and even 16bit data field of MSIMessage seems to be enough to store an IRQ number there. This simplifies MSI handling in sPAPR PHB. Specifically, this does: 1. remove a MSI window from a PHB; 2. add a single memory region for all MSIs to sPAPREnvironment and spapr_pci_msi_init() to initialize it; 3. encode MSIMessage as: * .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL; * .data as an IRQ number. 4. change IRQ allocator to align first IRQ number in a block for MSI. MSI uses lower bits to specify the vector number so the first IRQ has to be aligned. MSIX does not need any special allocator though. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 29 7月, 2013 1 次提交
-
-
由 David Gibson 提交于
This adds the necessary support for saving the state of the PAPR virtual PCI host bridge (or host bridges). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 6月, 2013 2 次提交
-
-
由 Avi Kivity 提交于
Use the new iommu support in the memory core for iommu support. The only user, spapr, is also converted, but it still provides a DMAContext interface until the non-PCI bits switch to AddressSpace. Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi.kivity@gmail.com> [ Do not calls memory_region_del_subregion() on the device's bus_master_enable_region, it is an alias; return an AddressSpace from the IOMMU hook and remove the destructor hook. - David Gibson ] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The TCE table is currently returned as a DMAContext, and non-type-safe APIs are called later passing back the DMAContext. Since we want to move away from DMAContext, use an opaque type instead, and add an accessor to retrieve the DMAContext from it. Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 22 3月, 2013 1 次提交
-
-
由 David Gibson 提交于
Currently the "spapr-pci-host-bridge" device has a "busname" property which can be used to override the default assignment of qbus names for the bus subordinate to the PHB. We use that for the default primary PCI bus, to make libvirt happy, which expects there to be a bus named simply "pci". The default qdev core logic would name the bus "pci.0", and the pseries code would otherwise name it "pci@800000020000000" which is the name it is given in the device tree based on its BUID. The "busname" property is rather clunky though, so this patch simplifies things by just using a special case hack for the default PHB, setting busname to "pci" when index=0. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 26 1月, 2013 1 次提交
-
-
由 David Gibson 提交于
Multiple - even many - PCI host bridges (i.e. PCI domains) are very common on real PAPR compliant hardware. For reasons related to the PAPR specified IOMMU interfaces, PCI device assignment with VFIO will generally require at least two (virtual) PHBs and possibly more depending on which devices are assigned. At the moment the qemu PAPR PCI code will not deal with this well, leaving several crucial parameters of PHBs other than the default one uninitialized. This patch reworks the code to allow this. Every PHB needs a unique BUID (Bus Unit Identifier, the id used for the PAPR PCI related interfaces) and a unique LIOBN (Logical IO Bus Number, the id used for the PAPR IOMMU related interfaces). In addition they need windows in CPU real address space to access PCI memory space, PCI IO space and MSIs. Properties are added to the PCI host bridge qdevice to allow configuration of all these. To simplify configuration of multiple PHBs for common cases, a convenience "index" property is also added. This can be set instead of the low-level properties, and will generate suitable values for the other parameters, different for each index value. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 17 12月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
update all users so we can remove the makefile hack. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 01 11月, 2012 1 次提交
-
-
由 David Gibson 提交于
This reverts commit a178274e. Contrary to that commit's message, the users of old_portio are not all gone. In particular VGA still uses it via portio_list_add(). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 29 10月, 2012 1 次提交
-
-
由 Alexander Graf 提交于
Now that all users of old_portio are gone, we can remove the hack that enabled us to support them. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 23 10月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 8月, 2012 2 次提交
-
-
由 Andreas Färber 提交于
Adopt the QOM parent field name and enforce QOM-style access via casts. Don't just typedef PCIHostState, either use it directly or embed it. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Introduce type constant. Introduce cast macro to drop bogus busdev field that would've broken SYS_BUS_DEVICE(). Avoid accessing parent fields directly. Free the identifier phb as acronym for PCI_HOST_BRIDGE. Updated against conflicting merge from branch 'agraf/ppc-for-upstream' (0d16fdd7), which removed busdev field differently, moved some code around and added new occurrences of 'phb'. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 16 8月, 2012 4 次提交
-
-
由 Alexey Kardashevskiy 提交于
Previously the only PCI bus supported was the emulated PCI bus with fixed DMA window with start at 0 and size 1GB. As we are going to support PCI pass through which DMA window properties are set by the host kernel, we have to support DMA windows with parameters other than default. This patch adds: 1. DMA window properties to sPAPRPHBState: LIOBN (bus id), start, size of the window. 2. An additional function spapr_dma_dt() to populate DMA window properties in the device tree which simply accepts all the parameters and does not try to guess what kind of IOMMU is given to it. The original spapr_dma_dt() is renamed to spapr_tcet_dma_dt(). Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
This patch implements MSI and MSI-X support for the pseries PCI host bridge. To do this it adds: * A "config_space_address to msi_table" map, since the MSI RTAS calls take a PCI config space address as an identifier. * A MSIX memory region to catch msi_notify()/msix_notiry() from virtio-pci and pass them to the guest via qemu_irq_pulse(). * RTAS call "ibm,change-msi" which sets up MSI vectors for a device. Note that this call may configure and return lesser number of vectors than requested. * RTAS call "ibm,query-interrupt-source-number" which translates MSI vector to interrupt controller (XICS) IRQ number. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> [agraf: fix error case ndev < 0] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
Currently the RTAS functions for handling PCI are registered from the class init code for the PCI host bridge. That sort of makes sense now, but will break in the future when vfio gives us multiple types of host bridge for pseries (emulated and pass-through, at least). The RTAS functions will be common across all host bridge types (and will call out to different places internally depending on the type). So, this patch moves the RTAS registration into its own function called direct from the machine setup code. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexey Kardashevskiy 提交于
Currently, the interfaces in the pseries machine code for assignment and setup of interrupts pass around qemu_irq objects. That was done in an attempt not to be too closely linked to the specific XICS interrupt controller. However interactions with the device tree setup made that attempt rather futile, and XICS is part of the PAPR spec anyway, so this really just meant we had to carry both the qemu_irq pointers and the XICS irq numbers around. This mess will just get worse when we add upcoming PCI MSI support, since that will require tracking a bunch more interrupt. Therefore, this patch reworks the spapr code to just use XICS irq numbers (roughly equivalent to GSIs on x86) and only retrieve the qemu_irq pointers from the XICS code when we need them (a trivial lookup). This is a reworked and generalized version of an earlier spapr_pci specific patch from Alexey Kardashevskiy. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> [agraf: fix checkpath warning] Signed-off-by: NAlexander Graf <agraf@suse.de>
-